The only hassle I had was a stuffed needle/seat. As it would be the car was perfect in race 1 and started acting up just before race 2... so I had no
time to fix it. This meant that I had to drive the car with the fuel pump on/off. . Every corner switch pump off at the braking marker and then on again at full throttle.
sander288
Custom Title Time!
"Bolt-on Master"
Posts: 1404
Threads: 183
Registered: August 26th, 2008
Member Is Offline
Location: Norman Park, QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: This is my bug. There are many others like it, but this one is mine.
posted on October 2nd, 2012 at 08:55 AM
Well done! some close racing there, in race 2 I thought you were going to get squished at the start!
Posts: 93
Threads: 10
Registered: June 11th, 2012
Member Is Offline
Location: Johannesburg, South Africa
Theme: UltimaBB Pro Blue ( Default )
posted on October 2nd, 2012 at 04:04 PM
Thanks, it was pretty close. Most of the cars around me was not in my class, so there was no need for taking chances.
I opened the carb yesterday night... the problem was not the needle/seat itself, but the float.... it somehow cannot be called a float anymore, it
sinks. At least I managed to race and finish
. Every corner switch pump off at the braking marker and then on again at full throttle.
