Posts: 52
Threads: 29
Registered: April 1st, 2008
Member Is Offline
Location: Lismore, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: confused
posted on November 17th, 2012 at 10:03 AM
Kombi winder/ regulator mechanism
G'day all, My kombi drivers side window has stopped going up and down. I have purchased a second hand winder mechanism and have removed the broken
one with the help of my trusty grinder. I now cant work out how the new one goes in. The gap between the inner door and the window guiding channel
appears too small to push the new mechanism through, and when I do it starts to bend (not good). Do I need to remove the window. If so How I do this?.
Any advice would be greatly appreciated as I am starting to get the shits
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
posted on November 17th, 2012 at 01:04 PM
Drop the glass into the door,remove the 1/4 vent and it will be reasonably easy.If you get the sh ts do what the 30 second creaner man on tv
does.....walk away!
binner
Fahrvergnugen
Posts: 981
Threads: 210
Registered: January 19th, 2010
Member Is Offline
Location: Brisbane
Theme: UltimaBB Streamlined2
Mood: want more grunt
posted on November 17th, 2012 at 07:38 PM
as above..... you need to take out the 10mm bolt also (i think) and then as you push the winder up in the gap pull the inner part (skin) of the door
towards you to make the gap wider.
I get the shits all the time after I have vinda looh!!!!!
