| [ Total Views: 1064 | Total Replies: 26 | Thread Id: 99824 ] |
|
|
 vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 24th, 2012 at 07:25 PM |
|
|
Vented disc brake rotors
My vented disc brake rotors arrived this week from the UK, they will fit ball joint and link pin spindles, 20MM thick, also have bought some calipers
to suit, they also bolt straight up, just have to get them engineered
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on November 24th, 2012 at 07:54 PM |
|
|
Hi
Nice, are they off another model car? Some engineers get a bit scared by non OEM stuff.
Steve
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 24th, 2012 at 09:01 PM |
|
|
NO, they are a direct replacement and are TUV aproved
|
|
|
mactaylor
Custom Title Time!
Posts: 1005
Threads: 54
Registered: August 14th, 2007
Member Is Offline
Location: Albury
Theme: UltimaBB Pro Blue
Mood: even my dog is german
|
| posted on November 25th, 2012 at 04:55 AM |
|
|
where are they from?
EVERLAST CONCRETE TANKS
1800 552 123
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 25th, 2012 at 06:16 AM |
|
|
Get they from the UK, very common in europe, i always wondered why no one used them in Australia.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on November 25th, 2012 at 08:30 AM |
|
|
| Quote: | Originally
posted by mactaylor
where are they from?
|
Hi
CSP have them.
TUV approval is well respected, I hope the bureaucrats understand what a TUV approval means.
Steve
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 25th, 2012 at 10:40 AM |
|
|
Plenty of CSP brakes on the road in Australia, lets hope they are approved, also the wilwood calipers and disc's that i see fitted to the Red9
suspension on kombi's by a sponsor of this site, I am told They are approved.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on November 25th, 2012 at 11:22 AM |
|
|
What calipers are you using with them?
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on November 26th, 2012 at 08:16 AM |
|
|
| Quote: | Originally
posted by vwo60
Plenty of CSP brakes on the road in Australia, lets hope they are approved, also the wilwood calipers and disc's that i see fitted to the Red9
suspension on kombi's by a sponsor of this site, I am told They are approved.
|
Hi
A long time ago I asked an engineer about the feasibility of using a Willlwood calliper as a hand brake only calliper. He would only pass OEM
callipers.
Steve
Steve
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 26th, 2012 at 08:47 AM |
|
|
Some one is approving the wilwood calipers on the kombi's that i have seen, dasdubber might like to comment, i have some porsche calipers and some
mazda calipers, both four spots, i already have fabricted a set before and even machined the aluminium hub and made the 12MM thick bracket to afix the
caliper, all aproved and engineered, i had to give him a CAD drawing of my proposed caliper bracket and aluminium hub, passed first time, I have
spoken to the engineer and he see no problems with the hubs.
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 26th, 2012 at 07:50 PM |
|
|
| Quote: | Originally
posted by 1303Steve
| Quote: | Originally
posted by mactaylor
where are they from?
|
Hi
CSP have them.
TUV approval is well respected, I hope the bureaucrats understand what a TUV approval means.
Steve
|
thats exactly what I thought, I recommended them to who owns my BerT3 drop spindles as a kit already exists that bolt on using these disks.
Let me know if they are approved.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
hulbyw
Insano Dub Head
Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on November 26th, 2012 at 08:20 PM |
|
|
As I understand it in Vic, TUV approved parts don't pose any problems to get passed by the engineers. So vw060, are you going to tell us which
company you imported them from?
Cheers........Wayne
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 26th, 2012 at 09:22 PM |
|
|
http://www.vwheritage.com/vw_spares_Brake-disc-vented-5-130-Each-AC612708KS_a...
Take of the vat, freight was cheap at about 50 pounds using UPS.
|
|
|
Burrelli
Officially Full-On Dubber
Posts: 244
Threads: 4
Registered: October 12th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 26th, 2012 at 10:33 PM |
|
|
I have had a bit to do with a CSP kit on a Type3 with the discs like that.They ad 6mm a side to the track and you can not fit the backing plate. Also
the caliper does seem to flex a fair bit more than a standard caliper with out the spacer for the wider disc.
Other than that they seem good. They are not TUV approved for a type3 only a type1.
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 27th, 2012 at 08:12 AM |
|
|
ah caliper flex, love that stuff 
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 27th, 2012 at 11:22 AM |
|
|
On my car the rotor does not increase the track at all as it is a direct replacement for the standard rotor extept for the rotor thickness which is
towards the inside of the car, just have to readjust the position of the caliper with a spacer, trial fit carried out and all is well
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on November 27th, 2012 at 02:18 PM |
|
|
sounds good.
I got ISP billet hubs waiting at the post office, trying a similar thing with having the face machined down 3.5-4mm to reduce the track increase from
using disks and eliminate the need for spacers washers on the caliper as Glenn provided.
they are 18mm think so even down to 14mm think its is still ridiculously think, heat treated 4130 btw. not sure about engineering cert on that, i'll
work it out.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 27th, 2012 at 04:06 PM |
|
|
I made the front and rear brakes on my early beetle, machined the hubs out out of 6000 aluminium in T6 form,
twenty MM vented rotors andon the front have mazda four spot calipers, all engineered and approved. No increase in track over the beetle rotors when
fitted to the link pin spindles.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on November 27th, 2012 at 05:21 PM |
|
|
Hi
Slightly off topic but i saw a post on shoptalk forums relating to VW factory 4 spot brakes on Swedish Type 3s http://vwtype3.org/scrapbook/4pot/
You learn someting everyday about VWs.
Steve
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 27th, 2012 at 05:59 PM |
|
|
That is very interesting how the calipers are two two pot calipers with it's own brake circut for each one, i wonder are they steel or aluminium,
learn something every day, thanks Steve.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on November 28th, 2012 at 06:32 PM |
|
|
| Quote: | Originally
posted by 1303Steve
| Quote: | Originally
posted by vwo60
Plenty of CSP brakes on the road in Australia, lets hope they are approved, also the wilwood calipers and disc's that i see fitted to the Red9
suspension on kombi's by a sponsor of this site, I am told They are approved.
|
Hi
A long time ago I asked an engineer about the feasibility of using a Willlwood calliper as a hand brake only calliper. He would only pass OEM
callipers.
Steve
Steve
|
Then he was an ill-informed dick 
madness is in the eye of the beholder  |
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on November 28th, 2012 at 06:39 PM |
|
|
| Quote: | Originally
posted by vwo60
Some one is approving the wilwood calipers on the kombi's that i have seen, dasdubber might like to comment, i have some porsche calipers and some
mazda calipers, both four spots, i already have fabricted a set before and even machined the aluminium hub and made the 12MM thick bracket to afix the
caliper, all aproved and engineered, i had to give him a CAD drawing of my proposed caliper bracket and aluminium hub, passed first time, I have
spoken to the engineer and he see no problems with the hubs.
|
Do you have any idea if using these with a permenantly attached plate for wide 5's would be passed by an engineer?
Can't see the problem myself if engineered correctly put what would I know
madness is in the eye of the beholder |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 28th, 2012 at 06:56 PM |
|
|
You would have to ask a engineer, there is a lot of different opinions about adaptors and calipers like the wilwood, it is obvious by the fitment of
the wilwood calipers to certain vehicles on the road that there has been some loose interpretation of the rules, i have been told by the guy i use
they are not a propritory caliper, also they do not have dust seals on some of there models
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on November 29th, 2012 at 08:32 AM |
|
|
| Quote: | Originally
posted by psimitarThen he was an ill-informed dick
|
I agree, when I approached him about guidance for fitting a WRX motor into a Beetle he said I had to be joking and hung up
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on November 29th, 2012 at 11:50 PM |
|
|
| Quote: | Originally
posted by vwo60
You would have to ask a engineer, there is a lot of different opinions about adaptors and calipers like the wilwood, it is obvious by the fitment of
the wilwood calipers to certain vehicles on the road that there has been some loose interpretation of the rules, i have been told by the guy i use
they are not a propritory caliper, also they do not have dust seals on some of there models
|
It amazes me how little these engineers seem to know about aftermarket brands. Wilwood and Bear brakes are huge in the USA and better made than most
OEM cast sliding calipers.
Taorx, Brembo, AP Racing, etc etc are all miles better than OEM. Heck Brembo are OEM on certain BMW and most Porsche vehicles.
Seems as tho most don't wish to properly earn their $120 an hour if something is a little different from making a boiler 
madness is in the eye of the beholder |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on November 30th, 2012 at 06:34 AM |
|
|
If the part you want yo use has not been through the ADR process it is safer to take the "I do not want to know about it" route, if the engineer
approves it he is lible for any issues that arise out of his approval, if there is a fatality he would be in deep dodo, so i suppose the safest thing
to do from there perspective is not to allow the use of the part or disign, saying that i was still able to disign my own hubs and machine them myself
for my early beetle and get them approved, just took a while.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on November 30th, 2012 at 03:37 PM |
|
|
| Quote: | Originally
posted by vwo60
If the part you want yo use has not been through the ADR process it is safer to take the "I do not want to know about it" route, if the engineer
approves it he is lible for any issues that arise out of his approval, if there is a fatality he would be in deep dodo, so i suppose the safest thing
to do from there perspective is not to allow the use of the part or disign, saying that i was still able to disign my own hubs and machine them myself
for my early beetle and get them approved, just took a while.
|
Ah yes, that lovely ideal that has come from the USA. Sue for everything. Liability insurance is getting ridiculous these days.
I mean, I get that they don't want stuff like that on them and would prefer something that has been pre-approved by a government department as it
takes the blame from them, which is what it's all about these day 'the blame game'. But at the same time for the money you are paying them they
should have sufficient training and knowledge to be able to ascertain if a design or product is safe and strong.
Especially when you think of the fact that even a well made caliper like Wilwood would pass it's in house inspection but because a seal had a slight
imperfection in it then it fails after only a few thousand K then it is no one's fault as you can't test for every eventually and shit happens.
This is the real world and the craziness needs to be reigned in
madness is in the eye of the beholder |
|
|
