| [ Total Views: 1273 | Total Replies: 4 | Thread Id: 101201 ] |
|
|
 zeuspig
Officially Full-On Dubber
Posts: 200
Threads: 52
Registered: November 5th, 2008
Member Is Offline
Location: Sunny Coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 11th, 2013 at 09:19 PM |
|
|
Subaru Help PLEASE!!
I am so close it is crazy but it seems there is a problem with getting this engine to fire over.
We have all the timing marks in place, but it seems like there is something wrong with the timing still, it backfires and the firing sequence is not
correct.
This was a fly by wire engine which I changed the manifold/wring harness, I also changed the Cam Pulley today as it was suggested that it would be
needed to be done with the change over.
PLEASE HELP!!!!
|
|
|
veedubberpaul58
Casual Dubber
Posts: 48
Threads: 3
Registered: July 6th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 12th, 2013 at 10:05 AM |
|
|
subaru motor is a pretty general description....but assuming a few things......
I know you have stated the timing is correct but...... make double sure you have the crank shaft sprocket on the right mark.
There is a couple of marks on the crank shaft sprocket and is very easy to set to the wrong one.....me and a few mates discovered this the hard
way.....
pretty sure that it has a wasted spark due to the coil being separated one per bank left and right if that complicates your diagnosis of not firing in
order....( some models have a coil on each plug lead like the EZ30 H6 etc)
|
|
|
 MISS VDUB
A.k.a.: Ash
Super Administrator
Mrs KOMBIBOB
Posts: 2565
Threads: 96
Registered: September 20th, 2005
Member Is Offline
Location: Beautiful Sunshine Coast, QLD
Theme: UltimaBB Pro White
Mood: Low down and Dirty
|
| posted on March 12th, 2013 at 01:18 PM |
|
|
Send Bob a message if you are having probs, he would be more than happy to help!
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
|
|
|
zeuspig
Officially Full-On Dubber
Posts: 200
Threads: 52
Registered: November 5th, 2008
Member Is Offline
Location: Sunny Coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 13th, 2013 at 09:35 AM |
|
|
Cool thanks, I will have a play again this afternoon after work. Fingers crossed
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 20th, 2013 at 01:10 AM |
|
|
does the cam sensor have the correct air gap ?
ie is the sensor the correct distance away from the cam wheel ?
1 to 2 mm max ?
did you time it correctly ?
what cam wheels did you fit ?
what motor is it ? quad cam ? single cam
Looking for that special lady : PM me for coffee & cake
|
|
|
