| [ Total Views: 2062 | Total Replies: 39 | Thread Id: 102769 ] |
| Pages: 1 2 |
|
|
 Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
 posted on July 15th, 2013 at 11:58 AM |
|
|
Best bang for my buck? (Engine/Trans Queries)
OK, so i'm giving alot of consideration to engine/trans build at the moment, and while i've done abit of research into what I'm after, I'm not
100% on everything. So my queries are as follows.
My initial plan at the moment is to build/get built a 2332 with a budget of around $5000-$6000. My plan is to find a buildier/mechanic to talk with
and order all the parts myself, then get them to build and install the unit.
Goal would be 150-160rwhp, more if possible with the budget, of course, haha. Would be a daily w/about 100Km at most highway driving. But possibly
more every now and again.
Also budgeting about $4000-$5000 for box.
My queries are as follows:
- Would a Type 4 enginer give me more giddy-up for the same sort of $$$?
- I've spoken with Rancho and they are confident they can provide a box for the power I'm going for that would be good for street and strip use.
Alot of aussies dont have a great deal of good to say about the rancho boxes but alot of Yanks say they have no issues. I dont think I would be
dragging weekly. Maybe a few runs per year (read 3-5 times a year). Are these boxes really that bad? If they were around the same price to get a good
box built I wouldnt even consider them, but we are talking $1000's cheaper.
- Given that I require reliability, I've heard 091 Bus boxes are great if built right. Would I be looking around the same price to build one of these
up?
Theres alot more I could ask but I think thats the ground work at the moment. I've waffled on enough as it is. Any help would be appreciated.
Thank you, Allbones.
|
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on July 15th, 2013 at 12:41 PM |
|
|
Also, will be running 95-98 octane.
|
|
|
Bone
Officially Full-On Dubber
Posts: 299
Threads: 43
Registered: August 9th, 2009
Member Is Offline
Location: Cooroy
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 15th, 2013 at 12:43 PM |
|
|
If MY gearbox budget is $4-5000, I wouldn't even consider 091 box I would go straight to subaru 5 speed from Todd @ subarugears. Coupled to a ej subi
motor you get the power, reliability, smoothness and good fuel consumption. This would be the only way I would go if I was to build a streeter or
another Baja. A lot less $$$ going Subaru power IMO.
|
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on July 15th, 2013 at 12:48 PM |
|
|
| Quote: | Originally
posted by Bone
If MY gearbox budget is $4-5000, I wouldn't even consider 091 box I would go straight to subaru 5 speed from Todd @ subarugears. Coupled to a ej subi
motor you get the power, reliability, smoothness and good fuel consumption. This would be the only way I would go if I was to build a streeter or
another Baja. A lot less $$$ going Subaru power IMO.
|
Yeh, I havent given a great deal of consideration to suburu as I'd really like to stay aircooled (call it the purist in me).
ITs also the same reason I havent given much consideration to the type 4's. The engines going in a beetle, so it should be a type 1 engine pushing it
along. haha.
Its pretty safe to say I'd like to stay air cooled.
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 15th, 2013 at 12:56 PM |
|
|
Mr allbones,
First up welcome to AVD....
Now your budget is a bit small for a honking stroker engine think $9000+ that's with some used parts...as for 150+ well maybe you have been reading
yanky forums as there numbers are always higher then ours,if you read around the Aussie forums you will see stroker engines will range from 90-140whp
which is a big difference between the two and also a big difference from what you wanted..I would suggest talking to some Australian engine builders
but don't get sold on a price,price and ponies are two different things......
Now as for a gearbox you will not need to spend $5000+ on a box as this will cover a full race box..if I was you I would ring Dave "dangerous muffin
man"butler ,he is on here as dangerous and have a chat with him....
Good luck
Fabo
|
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on July 15th, 2013 at 01:23 PM |
|
|
These are some of the parts I am looking at at the moment to give all a better understanding. Of course though, I will talk further with whoever I
decide to build with.
Engine:
Carb's: http://www.drdracingheads.com/xcart/Dual-48mm-IDF-webers-calibrated.html - $940
Case: http://www.drdracingheads.com/xcart/Aluminum-stroker-raised-roof-type-1-race-... - $880
Heads: http://www.drdracingheads.com/xcart/DRD-L7-Top-End-Performance-kit.html - $1250
Crank: http://www.drdracingheads.com/xcart/DRD-Short-block-kit-84mm-crank-H-beam-rod... - $800
Box: (as advised by Rancho salesman Mike Herbert, not sure if any relation with Mark Herbert, haha)
Rancho Pro Street Plus
3:78 1ST GEAR SET
3:88K RING & PINION
C/M PINION PLATE OR NUT
SWING AXLE (SWAY-A-WAY)
IRS (SUPER SPLINES WITH
BUS C/V FLANGES)
4-SPIDER SUPER DIFF
H/D ALUMINUM SIDE COVERS
WELDED 3-4 HUBS
STEEL SHIFT FORKS
HARDENED KEYS
WELDED T/O SHAFT
Total: $1894
Allowence has also been made for disk brakes all around ($1000 allowed for going by the kits on Vollks)
And $500 or so allowence for a Kaffer Bar set up in the rear.
None of the prices above include shipping/duty or exchange rate.
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on July 15th, 2013 at 02:02 PM |
|
|
Add an extra couple grand at least for other internal nick nacs (Rods, Rockers, Pushrods, pushrod tubes, Cam, Lifters, oil pump, cam drive gear set,
cam bearings, crank bearings, rod bearings, crank hardware, distributor drive shaft, oil cooler (assumed dog house), oil cooler stand, cylinder tin,
fan shroud, rocker covers, breather kit, flywheel, gland nut and washer, clutch kit, case fastening kit, ignition setup/system (hypo-dissy, coil),
crank pulley, alt stand, alternator, P&B Kit, gudeon pin retainers, HD fan).
Thats where i got stung most!! The go fast bits were the cheapest components compared to the sum of the nick nacs. (And i'm still getting stung as i
dribble in bits to the collection to build a go-go motor.
Not trying to dampen your spirits. Go for it, buy the bits and make it work! 
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
Smiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline
Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd
|
| posted on July 15th, 2013 at 02:09 PM |
|
|
| Quote: | Originally
posted by Allbones
- Would a Type 4 enginer give me more giddy-up for the same sort of $$$?
|
Power would be similar, but it would last 3 times as long.
Smiley
If you said I was a Volkswagen man, you'd be right.
|
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on July 15th, 2013 at 02:33 PM |
|
|
| Quote: | Originally
posted by bajachris88
Add an extra couple grand at least for other internal nick nacs (Rods, Rockers, Pushrods, pushrod tubes, Cam, Lifters, oil pump, cam drive gear set,
cam bearings, crank bearings, rod bearings, crank hardware, distributor drive shaft, oil cooler (assumed dog house), oil cooler stand, cylinder tin,
fan shroud, rocker covers, breather kit, flywheel, gland nut and washer, clutch kit, case fastening kit, ignition setup/system (hypo-dissy, coil),
crank pulley, alt stand, alternator, P&B Kit, gudeon pin retainers, HD fan).
Thats where i got stung most!! The go fast bits were the cheapest components compared to the sum of the nick nacs. (And i'm still getting stung as i
dribble in bits to the collection to build a go-go motor.
Not trying to dampen your spirits. Go for it, buy the bits and make it work!
|
Yeh, the Crank/engine kit does have a large amount of the bearings with it. I do realise there will be more.
Am I on the right track at least?
EDIT: May just be cheaper to get this: http://www.drdracingheads.com/xcart/DRD-High-Output-Type-1-2332CC-Engine-part...
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on July 15th, 2013 at 02:39 PM |
|
|
I'm not pro but i'd say so. I have heard of alot of people simply doing the parts collection first simply because its too big of an outlay for alot
of people to pay upfront. Then once you have all the bits start the assembly or find someone you trust to do it for you (as you have said).
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on July 15th, 2013 at 02:39 PM |
|
|
Have a look at some of the complete engines rod Penrose has for sale
Type 4.... Too expensive !
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 15th, 2013 at 02:58 PM |
|
|
Type 4 are for trucks IMO unless you spend a motza for real heads or are going forced induction.
Go to DB for a type 1 trans
Speak to different engine builders, as generally you get what you pay for, and ask yourself why is there such a wide difference in price, and also
ask the builder how long will it last, even try and speak to other owners that have used thier products.
I'd go with a quality US kit that your preferred engine builder is happy to work with. But be very careful, some cheaper parts WILLcost you more in
the long run
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on July 15th, 2013 at 06:46 PM |
|
|
Have a talk to Dave Butler on the gold coast, he is a machinist and has a good workshop at home, he builds the best gearboxes and engines, also
concider using crankshaft engineering at Browns Plains in Brisbane for balancing and other machining that dave does not do, you could either assemble
it your self or get dave to assemble it, get his advice on the parts best suited to your application.
|
|
|
Smiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline
Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd
|
| posted on July 15th, 2013 at 10:03 PM |
|
|
| Quote: | Originally
posted by hellbugged
Type 4.... Too expensive !
|
But they last a lot longer than a Type 1 so it will work out cheaper in the end.
Smiley
If you said I was a Volkswagen man, you'd be right.
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 15th, 2013 at 10:11 PM |
|
|
http://www.rodpenroseracing.com.au/index.php/penrose-store/complete-engines
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 15th, 2013 at 10:17 PM |
|
|
| Quote: | Originally
posted by Smiley
| Quote: | Originally
posted by hellbugged
Type 4.... Too expensive !
|
But they last a lot longer than a Type 1 so it will work out cheaper in the end.
Smiley
|
That depends on many factors Smiley
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 15th, 2013 at 11:31 PM |
|
|
That DRD SITE LOOKS GREAT DOESN'T IT, opps caps lock. I was looking at 2276 stuff but, long blocks about 3-4k great. Turnkeys 6-7k great. I have no
idea about quality, durability or actual hp figures and torque curves, but looks lots cheaper than what you can buy here.
I know what you mean about staying air cooled. The saddest part is a 7k wrx engine ise pretty great too, replacement parts readily available and
cheaper too. Tunability is all mainstream contemporary, and a factory matched box too.
Hmmm?
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 16th, 2013 at 06:47 AM |
|
|
You have to account for import duty and shipping with an engine from the states too. I think with a $4000 engine you will probably get stung with
$1500 import duty then there is shipping the damn thing on top of that! I've done alot of the research about doing this over the years and it always
comes back to rod being the cheapest.
|
|
|
Paulc1964au
Custom Title Time!
Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 16th, 2013 at 07:04 AM |
|
|
Having a 1776 built at the moment, I bought most parts myself and also bought some bargains from a mate which saved me around $1k. The only second
hand parts to go on the motor are the twin delortos.
My budget was $6k and with labour on the engine and installation plus replacement of fuel line, accelerator and clutch cables and the installation of
gauges I am up around $8.5k and it isn't a race motor just a nice engine
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on July 16th, 2013 at 07:29 AM |
|
|
Eliminate most of the labour costs by learning to do it yourself.
|
|
|
Klaus
Custom Title Time!
Posts: 1439
Threads: 100
Registered: August 25th, 2004
Member Is Offline
Location: Wollongong
Theme: UltimaBB Pro Blue ( Default )
Mood: Heavily modified
|
| posted on July 16th, 2013 at 08:25 AM |
|
|
Look on thesamba for 2 nd hand engines , good deals turn up all the time ... I run a type 4 in my bus mildly modified has 77 rwhp ..daily driver and
very reliable but to gain more hp as said it gets expensive with heads being the restriction but can be pushed close to 3 ltr
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 16th, 2013 at 08:25 AM |
|
|
| Quote: | Originally
posted by vwo60
Eliminate most of the labour costs by learning to do it yourself.
|
^^ that's all well and good Shayne, and I have also recommended that plan of action many times, but in the real world it can become an expensive
learning experience if a mistake is made on the many different details required for a quality build. It's in the details like getting the cam
thrust right or the fit of the lifters in the lifter bores or timing gear lash, even deburring the sus quality of new parts, or...or...well, you get
the idea. I heard a good one recently where no matter what the experienced VW engine builder did, he couldn't get the flywheel O-ring to fit the
new crank due to the cheapo cranks lack of chamfer....it was experience that stopped him completing the build and try and find a solution.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
1916baja
Custom Title Time!
Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline
Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 16th, 2013 at 09:46 AM |
|
|
I have always thought I'd like to have a crack at building my own engine but only if I was rebuilding a stocker. I'd never go near building my
current race engine, Ive got too much invested in it to cock it up! The way I see it, it's best to leave the hipo stuff you the people who know what
they are doing.
|
|
|
Subarugears
Officially Full-On Dubber
Posts: 236
Threads: 17
Registered: December 24th, 2011
Member Is Offline
Location: Sydney, Australia
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 16th, 2013 at 10:03 AM |
|
|
| Quote: | Originally
posted by Allbones
| Quote: | Originally
posted by Bone
If MY gearbox budget is $4-5000, I wouldn't even consider 091 box I would go straight to subaru 5 speed from Todd @ subarugears. Coupled to a ej subi
motor you get the power, reliability, smoothness and good fuel consumption. This would be the only way I would go if I was to build a streeter or
another Baja. A lot less $$$ going Subaru power IMO.
|
Yeh, I havent given a great deal of consideration to suburu as I'd really like to stay aircooled (call it the purist in me).
ITs also the same reason I havent given much consideration to the type 4's. The engines going in a beetle, so it should be a type 1 engine pushing it
along. haha.
Its pretty safe to say I'd like to stay air cooled.
|
FYI, Subarugears have developed billet adapter plates and flywheels for type i and type iv aircooled engines to be coupled to the Subaru 5 speed
transmission. Keen to have someone with a beetle fit up a combo and try it out for the world to see. We could do a deal.
Naturally, if you want to stay VW, Dangerous is your man.
 |
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on July 16th, 2013 at 10:29 AM |
|
|
usa motors are ok
Rancho trans ok
our little oval is upto about $12000 all up , motor trans & car
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on July 16th, 2013 at 07:02 PM |
|
|
That's what a hobby like ours is all about, learn about different things all the time, you can get the engine builder to do the first part of the
assembly, deck height, ect, ect and then assemble the engine yourself with his guidance, it is a simple engine if care is taken during assembly,
thousands are build by people every were, or you can always pay to have it built for you and end up with crap job like the one that you had to rebuild
for a customer Matt, the fact the flywheel did not fit is a issue withinn its self, this should have shown up on the preassembly of the engine and
could have been taken care of in a few minuets in the lathe before assembly. I had Dave Butler machine the deck height on my new case for the 2275 ,
i also used Crankshaft engineering to renitride my crank and finnish grinding it to suit the bearings when the case was preassembled with the bearings
installed, there is a lot of expertise out there, it is just a matter of finding it.
|
|
|
vvwbeetle
Officially Full-On Dubber
Posts: 234
Threads: 63
Registered: April 18th, 2011
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Upsetting bikes on the Old Road
|
| posted on July 16th, 2013 at 08:43 PM |
|
|
Allbones
I have a 2332, putting out 151hp on the dyno, not a revy engine, max power just over 6500rpm, awesome street driver with heaps of torque, happy to
discuss any questions
ps. not my daily driver-but on the run to Valla last year avg close to 9ltrs/100km with a 4 speed box sitting at 3500 rpm bang on 100km/h.
Simon
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on July 16th, 2013 at 09:13 PM |
|
|
Shayne, you better read the post, the crank didn't have enough chamfer for the O-ring to work, who pre-assembles with the O-ring? I know I don't. I
also use the best in the business, Crankshaft Engineering and DB, and have been doing so since the early nineties. Stop tring to argue or the sake of
it. It's hardly constructive. My point was that the parts are often an issue, in this case they were customer supplied, hence the statement that
often cheap parts can cost you more in the long run.
I love the fact that the OP wants a hipo VW. They are more than capable on the street when built right, and can live when properly maintained. Yes
they are a bit more work to build and maintain, but doing it with aircooled has a big advantage with simplisity and light weight IMO. As Simon said
above, good fuel economy is also very achievable.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
DakDak67
Officially Full-On Dubber
Posts: 208
Threads: 15
Registered: September 12th, 2011
Member Is Offline
Theme: XMBX Pro Green
|
| posted on July 16th, 2013 at 11:33 PM |
|
|
Big bore engines rock, mine gets thrashed regularly and has done for over two and a half years and god knows how long it was flogged before I got the
car as the previous owner told me how he regularly drove the car over the Ton. I laugh every time some douche tells me it won't last or it will blow
up because I drive it hard... Dicks.
Its a Scat 2276 , 44 idf's perfect street engine with a sweet 850 rpm idle , and a flat torque curve all the way to 6k .
135hp / 107rwhp . This is in a Split bus, and it will pull in third off idle no problem. A high lift top end screamer would be useless . Oh and a
Rancho pro street box and Kennedy stage 1 that's done a zillion miles. So that's my US motor.
|
|
|
Allbones
Officially Full-On Dubber
Posts: 395
Threads: 58
Registered: July 5th, 2012
Member Is Offline
Location: Ipswich QLD
Theme: UltimaBB Pro Black
|
| posted on July 16th, 2013 at 11:53 PM |
|
|
vvwbeetle:
Cheers man, I appreciate the offer. By the sound of it, you have achieved exactly what I want! So its do-able 
matberry:
It was actually reading one of your earlier posts on the forum that I decided I wanted to go the 2332 route.
DakDak67:
Just reaffirming me more, I love it, haha. Great to get some feed back on the rancho boxes too! Did you ship it or grab it from das resto?
|
|
|
| Pages: 1 2 |
