Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood:Brad'ed Off
posted on February 15th, 2014 at 01:32 PM
Multi-rib pulley for type 4 Fan/Pulley
Been playing around with this, pulley is from a VS commodore harmonic balancer. This is just pushed together with a bit of interference at the moment,
would need to be silver soldered or brazed together as the pulley is cast iron. Might see if I can chase down a steel pulley so I can get it spot
welded on.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
posted on February 16th, 2014 at 09:56 AM
have you tried parting the balancer and using the center 3 spoke hub coupled with a center adapter, which then can bolt to the crank with the fan
possibly.
otherwise there are aftermarket billet balancers for commodores.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood:Brad'ed Off
posted on February 16th, 2014 at 10:49 AM
A centre adapter would work but I didn't want to disrupt the airflow with the spokes and hub. I'll keep looking for something more suitable, next
time I'm at the wreckers.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
