| [ Total Views: 1185 | Total Replies: 11 | Thread Id: 107549 ] |
|
|
 Euro_67
Wolfsburg Wizard
Posts: 690
Threads: 75
Registered: October 14th, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 2nd, 2014 at 03:14 PM |
|
|
'71 Type 3 Auto - Reverse lights not working
Hi All,
My buddy just picked up a tidy '71 Type 3 AUTO.
The reverse lights are not working. We have checked the globes, fuse, etc....
Where is the reverse light activation switch? I can't see anything in the trans.
Anyone have any idea?
Thanks,
Wayne.
|
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on November 2nd, 2014 at 04:22 PM |
|
|
It's at the shifter.Lift the cover up at the shifter(2 small PK screws) and there is a white plastic switch there- 2 wires for the starter and 2 for
the reverse lights.
|
|
|
Euro_67
Wolfsburg Wizard
Posts: 690
Threads: 75
Registered: October 14th, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 2nd, 2014 at 07:49 PM |
|
|
Thanks.
The shifter only has one set of wires for the interlock.
A closer inspection has revealed there is no wiring to the reverse light bulb holders, and no obvious or disconnected additional wiring inside the
rear fenders.
Is it possible this car preceded the introduction of reversing lights, and has been fitted with incorrect tail light assemblies?
Thanks.
|
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on November 2nd, 2014 at 08:22 PM |
|
|
Cant answer that one.Does the switch have a spare pair of male electrical terminals. If it does, it's an easy fix to run a wire back to make your
reverse lights work.
|
|
|
vduboy
Insano Dub Head
Posts: 702
Threads: 41
Registered: October 6th, 2012
Member Is Offline
Theme: UltimaBB Streamlined2
Mood: Dying to get more buggy building time..
|
| posted on November 3rd, 2014 at 10:06 AM |
|
|
| Quote: | Originally
posted by Euro_67
Thanks.
The shifter only has one set of wires for the interlock.
A closer inspection has revealed there is no wiring to the reverse light bulb holders, and no obvious or disconnected additional wiring inside the
rear fenders.
Is it possible this car preceded the introduction of reversing lights, and has been fitted with incorrect tail light assemblies?
Thanks.
|
Yep, I had a beetle that had the wrong lenses on it. Was a pain in the ass at rego time...
It will all be OK in the end, if it's not OK it's not the end!
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on November 3rd, 2014 at 11:56 AM |
|
|
It should have them, in Oz 70 was the first year of reverse lights in type 3s
It was 72 in Beetles and Kombis.
|
|
|
hpnotch
Seriously Crusin Dubber
Posts: 133
Threads: 28
Registered: November 11th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 3rd, 2014 at 07:02 PM |
|
|
I've got a 71 notch (manual) - no reversing lights but it does have the clear section in the lens. No wiring to the bulbs, and there wasn't a
switch to activate them.There was a plastic blank inserted in the reverse bulb sockets, so I think your theory is right and it was probably
sometime after 71 before they came installed with reversing lights. (I have a 72 wreck that does have the lights wired up).
i retro fitted a switch into the gearbox of the 71 and wired up the lights (pinched fittings off the 72 wreck to do it).
|
|
|
d3wy
Casual Dubber
Posts: 23
Threads: 6
Registered: October 30th, 2014
Member Is Offline
Location: Newcastle, NSW
Theme: XMBX Pro Green
|
| posted on November 7th, 2014 at 01:52 PM |
|
|
As the overjoyed owner of the car in question I thought I would post a small update on how this issue was rectified. Upon closer inspection the car
seems to be a 1970 model (late tho so likely first registered 1971). The switch that took the place of the neutral cut out for the starter in fact had
4 contact but was wired in an odd way (see attached photo) after looking at some adjustments I was able to move it back enough to allow the contacts
to contact up and down between pairs rather than back and forward as it was configured giving me my elusive reverse lamp switch. Wired in a new active
from the coil with an inline 7A fuse glass holder sourced from jay car to the coil it's all working. One of my tail lights already had a bulb in it
the other had no holder but on true second hand old car style it came with a box of parts and I was able to get together a bulb holder for the missing
side and I now have a pair of reversing lights.
I appreciate the car may not have skipped with these working, more than likely actually, having the lenses there I could foresee some friction at
blue slip time. Not to mention the obvious safety benefits of having them working.
|
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on November 7th, 2014 at 02:41 PM |
|
|
I have several of those switches-but never used one because I never understood how they worked.It would appear now they only allow to start in Park
and not neutral,and have a position for reverse lights.I assume from your pic that the lever is in drive and park is to the right of screen.I don't
know where I got those type of switches from,so don't know what vehicle they came from.I have always used switches with 3 terminal positions which
allows to start in the N position as well.With the 2 position switch I have shown-starting in P is the 2 terminals on the left of switch and reverse
is the 2 on the right.You will see from the other switch how the next 2 terminals will be joined when the lever is in the N position.In your pic you
will see that when the lever is pushed all the way to the right,the brass contact strip on the lever will join the 2 front brass pads on the switch
allowing current to go to the starter solenoid-this will only happen in P.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
d3wy
Casual Dubber
Posts: 23
Threads: 6
Registered: October 30th, 2014
Member Is Offline
Location: Newcastle, NSW
Theme: XMBX Pro Green
|
| posted on November 7th, 2014 at 05:19 PM |
|
|
You are correct mostly. From my research the two terminal ones like that which I have were installed to allow reverse lights and stating in N. In that
photo my shifter was actually in park. Allegedly the option to start in both park and neutral was added around 72 which is where the three terminal
ones come from. Now oddly as my car didn't have back up lighting wired in it positioned the 'wiper' (brass on the shifter between the front and
rear pairs rather than the intended top and bottom style connection so I swapped the pins around so the reverse power and lights were plugged into one
side and the pair shown in the above image were both connected on the other side
If it wasn't for exuberant cost involved in getting the three pair set I would retrofit one in to allow parking in park also but for now I will
stock to as Wayne calls it 'vw quirkiness' and focus on getting rid of the fuel filter in the engine bay, refreshing the lines and cleaning up the
carburettors.
|
|
|
nbturbo
Veteran Volks Folk
Posts: 2171
Threads: 89
Registered: December 19th, 2002
Member Is Offline
Location: Whyalla Sth.Aust.
Theme: UltimaBB Powder
|
| posted on November 7th, 2014 at 08:11 PM |
|
|
OK - I'm onto it now, neutral only starting. Both types of switches work with the pair of pads that are on top of each other-not side by side to be
connected to each other with the wiper brass pad on the lever. Thought VW would have been smarter to have Park only starting- at least the vehicle
would be safer to start with no chance of it rolling away.
|
|
|
BRUTUS
A.k.a.: et tu, Brute
Officially Full-On Dubber
Posts: 255
Threads: 17
Registered: February 8th, 2006
Member Is Offline
Location: Brutus has retyred
Theme: UltimaBB Pro Grey
Mood: ACE 30 FOR SALE!
|
| posted on November 7th, 2014 at 09:57 PM |
|
|
Up to the 1970 model inclusive, there were no reversing lights (could be optioned or retro-fitted); it would ONLY* start in N; there are lamps in the
selector, and the selector had chrome surround, with 1,2, 3... on solid base, on it.
From the 1971 model on, there should have been reversing lights standard, it will start in N or P; there are lamps in the selector - in case you drive
at night; and the selector housing is black plastic with 1,2 D... on clear base, on it.
*Supposedly this earlier type "cannot" be rewired to start in P.
ACE 30 & 40 oils: specifically engineered for your Air Cooled VW
delivered (free del.) throughout Yarra Valley / Ranges, & Gippsland areas. Also ACE 20, 50 & 90.
FOR SALE: ACE 30, 40 etc. Oil formulations & Trade-names.
|
|
|
