| [ Total Views: 1145 | Total Replies: 15 | Thread Id: 110472 ] |
|
|
 Blue65
A.k.a.: Yau
Officially Full-On Dubber
Posts: 298
Threads: 93
Registered: September 30th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Retrospective
|
| posted on January 25th, 2016 at 11:06 PM |
|
|
Best exhaust / muffler system
Whats a good exhaust / muffler system to get?
I have a 1641cc engine.
I saw this -
http://shop.vintagespeed.com.tw/s.nl/it.A/id.523/.f
______________________
Owner of a 1964 VW Beetle, 1641cc engine, etc..
|
|
|
lauzboy
Seriously Crusin Dubber
Posts: 175
Threads: 42
Registered: March 29th, 2005
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 25th, 2016 at 11:38 PM |
|
|
I've had several exhausts, the last one being a stainless extractors and hide-away system. I ditched it and got a Vintage Speed and wish I'd done it
sooner. I've been running the VS system for about 5 years and wouldn't go back.
Whilst the extractors probably flow better, the VS system doesn't bottom out over driveways, fits the stock rear apron cutouts nicely, you don't
have to take the muffler off to do #1&2 tappets, etc
The build quality justifies the price, and if you're running a single carb then the pre-heat tube outlets actually flow the exhaust gas THRU, not
just pulsing from #2&4
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on January 26th, 2016 at 04:47 AM |
|
|
all VS systems available from VVDS in Sydney
Had mine on for 5 years or so great sound and no fuss
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 26th, 2016 at 07:00 PM |
|
|
Stock carb? You will definitely need heat risers
Either Vintage Speed or stock.
If stock get a flange kit put on and then ceramic coated
Futue te ipsum!!!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on January 26th, 2016 at 09:42 PM |
|
|
If the engine is basically stock, bar the extra few CC, then the Vintage Speed is the nicest solution and won't ever rust like the large majority of
header and silencer options on the market.
Check out their website as they're only in Taiwan, IIRC, so direct shipping could save you a few pennies. Worth a shot 
madness is in the eye of the beholder  |
|
|
Blue65
A.k.a.: Yau
Officially Full-On Dubber
Posts: 298
Threads: 93
Registered: September 30th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Retrospective
|
| posted on February 18th, 2016 at 04:15 PM |
|
|
| Quote: | Originally
posted by psimitar
If the engine is basically stock, bar the extra few CC, then the Vintage Speed is the nicest solution and won't ever rust like the large majority of
header and silencer options on the market.
Check out their website as they're only in Taiwan, IIRC, so direct shipping could save you a few pennies. Worth a shot
|
Thanks you.
Do you have a link for that please?
______________________
Owner of a 1964 VW Beetle, 1641cc engine, etc..
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on February 18th, 2016 at 11:31 PM |
|
|
| Quote: | Originally
posted by Blue65
Thanks you.
Do you have a link for that please?
|
Yup, tis just a .com.tw address. Here it is Vintage Speed Taiwan website
madness is in the eye of the beholder |
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on February 19th, 2016 at 12:05 AM |
|
|
We have a 1776 and stock exhaust with bigger flowing tips is fine. Depends on your budget and what you have already. If I had to replace our system
due to rust etc, I would weigh up the cost between the stock quality one we have now and the Vintage Speed. When we got the engine built, the engine
builder said with the single stock rejetted carby, a larger exhaust was not necessary, just the larger tips.
|
|
|
ragged
A.k.a.: David
Wolfsburg Wizard
Just ask if you need HELP!
Posts: 478
Threads: 46
Registered: January 25th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue
Mood: Medication seems to be working
|
| posted on February 19th, 2016 at 07:00 PM |
|
|
I have that model with the heat risers brand new that you can have for $750 delivered, if your interested? Dave
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on February 19th, 2016 at 10:39 PM |
|
|
Well the Vintage Speed is meant to flow better than the std exhaust so will make a few extra ponies but should make it rev more freely too.
I do vaguely remember Volksworld doing a back to back test on a std 1600 with all the types of aftermarket exhausts compared to the standard and the
vintage did give more BHP yet the Abarth style was worse than the stock exhaust as well as the phat boy muffler cos it dropped exhaust gas speed too
much for the 1600 but would work better on a 1776 upwards.
Bigger tips would help reduce back pressure but if the Vintage internal tubing of the main can flow better than a stock exhaust then it'll always be
better and would still work well upto around a 1776. Then I'd say it would start restricting the flow of larger motors
madness is in the eye of the beholder |
|
|
Blue65
A.k.a.: Yau
Officially Full-On Dubber
Posts: 298
Threads: 93
Registered: September 30th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Retrospective
|
| posted on February 21st, 2016 at 08:03 PM |
|
|
| Quote: | Originally
posted by psimitar
Well the Vintage Speed is meant to flow better than the std exhaust so will make a few extra ponies but should make it rev more freely too.
I do vaguely remember Volksworld doing a back to back test on a std 1600 with all the types of aftermarket exhausts compared to the standard and the
vintage did give more BHP yet the Abarth style was worse than the stock exhaust as well as the phat boy muffler cos it dropped exhaust gas speed too
much for the 1600 but would work better on a 1776 upwards.
Bigger tips would help reduce back pressure but if the Vintage internal tubing of the main can flow better than a stock exhaust then it'll always be
better and would still work well upto around a 1776. Then I'd say it would start restricting the flow of larger motors
|
Sorry is the vintage speed one have the Abarth style??
I have a 1641cc engine
______________________
Owner of a 1964 VW Beetle, 1641cc engine, etc..
|
|
|
Blue65
A.k.a.: Yau
Officially Full-On Dubber
Posts: 298
Threads: 93
Registered: September 30th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Retrospective
|
| posted on February 21st, 2016 at 08:12 PM |
|
|
| Quote: | Originally
posted by lauzboy
I've had several exhausts, the last one being a stainless extractors and hide-away system. I ditched it and got a Vintage Speed and wish I'd done it
sooner. I've been running the VS system for about 5 years and wouldn't go back.
Whilst the extractors probably flow better, the VS system doesn't bottom out over driveways, fits the stock rear apron cutouts nicely, you don't
have to take the muffler off to do #1&2 tappets, etc
The build quality justifies the price, and if you're running a single carb then the pre-heat tube outlets actually flow the exhaust gas THRU, not
just pulsing from #2&4
|
Can you buy them here or did you order them from Taiwan direct?
______________________
Owner of a 1964 VW Beetle, 1641cc engine, etc..
|
|
|
Blue65
A.k.a.: Yau
Officially Full-On Dubber
Posts: 298
Threads: 93
Registered: September 30th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Retrospective
|
| posted on February 21st, 2016 at 08:19 PM |
|
|
| Quote: | Originally
posted by ragged
I have that model with the heat risers brand new that you can have for $750 delivered, if your interested? Dave
|
Yes, I'm interested. I have a 1641cc engine with heater components - will it fit?
______________________
Owner of a 1964 VW Beetle, 1641cc engine, etc..
|
|
|
ragged
A.k.a.: David
Wolfsburg Wizard
Just ask if you need HELP!
Posts: 478
Threads: 46
Registered: January 25th, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue
Mood: Medication seems to be working
|
| posted on February 21st, 2016 at 08:32 PM |
|
|
This is the muffler. http://vwparts.aircooled.net/Vintage-Speed-SS-Sport-Muffler-155-203-05200-p/1...
You can use these to fit standard heater boxes. http://vwparts.aircooled.net/SearchResults.asp?Search=155-200-FF100
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on February 21st, 2016 at 09:47 PM |
|
|
| Quote: | Originally
posted by Blue65
| Quote: | Originally
posted by psimitar
Well the Vintage Speed is meant to flow better than the std exhaust so will make a few extra ponies but should make it rev more freely too.
I do vaguely remember Volksworld doing a back to back test on a std 1600 with all the types of aftermarket exhausts compared to the standard and the
vintage did give more BHP yet the Abarth style was worse than the stock exhaust as well as the phat boy muffler cos it dropped exhaust gas speed too
much for the 1600 but would work better on a 1776 upwards.
Bigger tips would help reduce back pressure but if the Vintage internal tubing of the main can flow better than a stock exhaust then it'll always be
better and would still work well upto around a 1776. Then I'd say it would start restricting the flow of larger motors
|
Sorry is the vintage speed one have the Abarth style??
I have a 1641cc engine
|
No mate. I was just elaborating on the different types of exhaust that were tested and used the Abarth as it's a popular-ish choice due to the twin
tip outlets making it look like an old 60's Ferrari style exhaust. However looks doesn't mean it'll actually perform.
But to clarify the magazine article said that the vintage speed exhaust worked very well on the std 1600 engine they used as the test bed and gave
more BHP and torque than the std VW exhaust.
madness is in the eye of the beholder |
|
|
Blue65
A.k.a.: Yau
Officially Full-On Dubber
Posts: 298
Threads: 93
Registered: September 30th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Retrospective
|
| posted on February 21st, 2016 at 09:54 PM |
|
|
Cool. What's the warranty like on this? Do you run a shop or are you affiliated to Aircooled?
______________________
Owner of a 1964 VW Beetle, 1641cc engine, etc..
|
|
|
