| [ Total Views: 844 | Total Replies: 5 | Thread Id: 111877 ] |
|
|
 hus22l
Officially Full-On Dubber
Posts: 229
Threads: 36
Registered: April 24th, 2012
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 5th, 2016 at 07:11 AM |
|
|
Electric engine lid release?
Hey all - has anyone tried - or seen this done before?
I've searched but can't find anything in this forum specific for my issue.
I have a 67 beetle with the "T" engine lid lock. I have picked up a really nice deck lid with louvres in it, problem is the locking mechanism has
been taken out / deleted. There is no locking handle, it has been welded closed and smoothed over with body filler.
I want to use it (for the louvres) - as I'm not real keen on stand offs, but I also want it to lock. I started sanding it back, noticed the filler
and thought it was just bogged up - so easy to take back to stock... however I then noticed the weld from underneath, which is potentially a lot
harder to remove/restore.
- has anyone retro fitted an electronic latch/release mechanism on their beetle?
- any ideas or thought?
|
|
|
Flintstones
Custom Title Time!
Posts: 1077
Threads: 69
Registered: August 27th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Psyche Blue
|
| posted on December 5th, 2016 at 08:16 PM |
|
|
There is a thread on here that was started many moons ago. If my memory serves me well, I think Boof either made or was making a movable lid but
don't quote me..
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 5th, 2016 at 08:29 PM |
|
|
Doesnt Birchall have one on the Orange Smoothie?
Futue te ipsum!!!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on December 5th, 2016 at 09:37 PM |
|
|
So the Inner panel has been removed and modified so that the brace between the inner and outer panel that the lock spindle slides through is missing?
The outer blanking piece was probably made to sit within the indent for the T-handle boss.
However, If you wish to go electric then it's just a solenoid attached to the locking plate of the decklid. May need to operate by a lever to get the
correct travel ratio between the plate and solenoid travels.
I used to do remote locking on older vehicles by nipping to the scrappies and garbbing some door solenoids from fancier cars but sure they're
available cheap from Ebay these days.
madness is in the eye of the beholder  |
|
|
hus22l
Officially Full-On Dubber
Posts: 229
Threads: 36
Registered: April 24th, 2012
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 6th, 2016 at 05:39 AM |
|
|
Thanks guys. I will have to take some photos. I have had to rush in to work early so couldn't get any this morning.
The inner support panel has not been removed. It appears there hole, in the outer skin, has been welded closed from the inside, then it's been
bogged over from the outside. So potentially it is reversible? When I noticed the weld I stopped sanding.
So I'm thinking either:
1. electric deck lid release;
2. Seeing if I can set up the locking system for the front bonnet into the back, will have to get a spare and play around with that; or
3. Leather straps.
I'll get some photos up. If anyone can locate that old thread that would be awesome. I couldn't find it.
|
|
|
Flintstones
Custom Title Time!
Posts: 1077
Threads: 69
Registered: August 27th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Psyche Blue
|
| posted on December 6th, 2016 at 07:22 PM |
|
|
Found it. but, it opened from the top to help cool the motor at speed.....
http://forums.aussieveedubbers.com/viewtopic.php?tid=61279&page=1#pid582550
|
|
|
