| [ Total Views: 2259 | Total Replies: 4 | Thread Id: 112654 ] |
|
|
 bratjie
Learner Dubber
Posts: 4
Threads: 2
Registered: August 10th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 27th, 2017 at 10:01 PM |
|
|
Wasser box eng locks up but starts up again soon
Hi guy's, need some advice please, I have rebuilt a few wbx engines before and even run a 2.1 Turbo in my beetle. I have overhauled a 2.1 standard
sizes on case crank & sleeves. When the case came together the crank turned freely by hand. I installed the engine and ran it for half an hour at
idle. Then started revving up slightly to check for smoke, knocks, etc,etc and the engine locked up. however after 30 sec's the engine turns freely
and will start first time and idles perfect. I reopened and saw that the centre main bearing caps have worked a little harder than the rest but
nothing out of the ordinary, cleaned all up, polished the crank, fitted new mains. Now it will idle up to half an hour with 80deg normal, .5 bar oil
press at operating temp. still does the same, locks up after half our. If I keep revs at 2300rpm it will lock up up after a minute. 1 minute later it
will start up first click and runs like nothing ever happened but half an hour later, same thing. Using 20 W 40 Castrol as in all other builds.
anybody had an experience like this before? Also running 1.9 carb on customers request. Please help! |
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2017 at 10:02 AM |
|
|
mmmm............... might be woth asking the question here
http://forums.kombiclub.com/forums/t3-t4-tech-help-clinic.68/
A few more T3 techies there
Futue te ipsum!!!
|
|
|
bushed
Wolfsburg Elder
Posts: 3539
Threads: 66
Registered: December 18th, 2006
Member Is Offline
Location: Lowood Qld
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 28th, 2017 at 01:00 PM |
|
|
Something else is tight in the set up
had 36hp mtr lock up when hot due to 1 pushrod guide being too tight. after refurb....just 1 ...ground it down and bingo!
Sorry not fam with the Wassers.
want any vw bits old but like me, Made in Germany!!!
|
|
|
kombiwhisperer
Seriously Crusin Dubber
Posts: 131
Threads: 63
Registered: May 24th, 2012
Member Is Offline
Location: tiaro queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: daily changing
|
| posted on August 4th, 2017 at 06:23 PM |
|
|
Maybe you being cheeky with endfloat, what you set at??
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on August 4th, 2017 at 08:42 PM |
|
|
..Kombi whisperer amy be on the money particularly as it frees when it cools, the crank isn't showing seizure marks.
|
|
|
