Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Buying, Selling & Swapping Parts Navigation Symbol NSW Link pin Formula Vee front beam with disc brake conversion Go To Bottom

Forum Rules
New guidelines are in place as of 15/1/2014. Please review here:

http://forums.aussieveedubbers.com/viewtopic.php?tid=104733 

Printable Version  
[ Total Views: 687 | Total Replies: 0 | Thread Id: 112816 ]
« View Previous Thread View Next Thread »
Author: Subject:  NSW Link pin Formula Vee front beam with disc brake conversion
Membersprite2002
Learner Dubber
*

No Avatar


Posts: 2
Threads: 3
Registered: April 7th, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on September 24th, 2017 at 08:54 PM
NSW Link pin Formula Vee front beam with disc brake conversion

I bought this Formula Vee front end to fit to a hill climb special but have decided to go another route.
This is a link pin front beam with caliper mounts and discs. The calipers will need a rebuild as sitting for quite some time i think. The beam has height adjustment kit fitted with some of the leaves removed and also runs formula vee sway bar and shimmed to give camber. Comes with a nice tight steering box, 2 spare discs which will require small machining to fit conversion bearings.
The discs on the beam has has extra holes drilled at some stage to fit 4x100 PCD hence the extra holes.
Fit to your Vee or VW Beetle
I'm in Winmalee near Springwood.
Asking $450 ono
0439 593 407


 Aussieveedubbers Navigation Symbol Buying, Selling & Swapping Parts Navigation Symbol NSW Link pin Formula Vee front beam with disc brake conversion   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.0% - SQL: 99.0% ]