| [ Total Views: 1475 | Total Replies: 4 | Thread Id: 112957 ] |
|
|
 njg02
Seriously Crusin Dubber
Posts: 145
Threads: 37
Registered: May 12th, 2005
Member Is Offline
Location: Central Queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: Grateful.
|
| posted on November 26th, 2017 at 09:00 PM |
|
|
Leaking gearbox
Good evening.
71 super. all stripped. Thinking about sand blasting the chassis, or not.
Lots of oil on the frame horns and into the tunnel. I'm thinking from the gearbox, because it is leaking while sitting on the floor.
I've never stripped a box. But can I pull it apart and just do gaskets?
Can I do it with a basic set of shed tools or do I get someone to do the bearings etc?
Not much online to do with pulling a gearbox apart.
Thanks.
Neil
71 super in progress.
|
|
|
njg02
Seriously Crusin Dubber
Posts: 145
Threads: 37
Registered: May 12th, 2005
Member Is Offline
Location: Central Queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: Grateful.
|
| posted on November 26th, 2017 at 09:28 PM |
|
|
Found these. Now need time to look.
http://aircooledvwvideos.com/
71 super in progress.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on December 1st, 2017 at 07:06 PM |
|
|
I would suggest giving it to someone who understands the VW transmissions, it is easy to get into trouble as there are special tools to set the
selectors etc particularly if there is a bearing or 2 that need replacing. Replacing the gaskets is straightforward but you need tools for the pin ion
nut etc.
Talk to Dangerous he is the "guru".
|
|
|
njg02
Seriously Crusin Dubber
Posts: 145
Threads: 37
Registered: May 12th, 2005
Member Is Offline
Location: Central Queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: Grateful.
|
| posted on December 1st, 2017 at 08:37 PM |
|
|
Thanks grumble.
I talked with a local guy and I'll just do all the seals that I can without doing anything silly.
He even said it was specialised and he normally sends them away.
71 super in progress.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on December 2nd, 2017 at 06:37 PM |
|
|
| Quote: | Originally
posted by njg02
Thanks grumble.
I talked with a local guy and I'll just do all the seals that I can without doing anything silly.
He even said it was specialised and he normally sends them away.
|
In most of these boxes the rear nmainshaft bearing is buggered, this can be replaced if necessary without dismantling the box with a fair bit of care
and ingenuity but can go pear shaped if you do not know what you are doing.
Good luck
Les
|
|
|
