| [ Total Views: 1252 | Total Replies: 13 | Thread Id: 1225 ] |
|
|
 KOM123
Custom Title Time!
Smiling Assassin
Posts: 1164
Threads: 121
Registered: August 26th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always cheery!
|
| posted on October 14th, 2002 at 10:28 PM |
|
|
Interior light in the kombi.
The interior light in the '76 Kombi can be manually switched on at any time, seems to be a three position switch. Is it meant to come on
automatically when the doors open (because it doesn't at the moment)? Also the light it emits is a fairly dim yellowish glow, what's the
best way to whiten and brighten this up?
|
|
|
Herbie Down Under
A.k.a.: Richard Graham
Seriously Crusin Dubber
VW club of Victoria
Posts: 152
Threads: 28
Registered: August 27th, 2002
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 14th, 2002 at 10:36 PM |
|
|
Wellif the lights not coming on either you have a bad connection somewhere or the switch on the light is broken. Happens to alot of interior lights
as they get old. Too make the light brighter I pulled the switches out of the door pillars and cleaned them until everything was clean and new again.
I would also clean all the connections of the wiring. This turned my lightly glowing light into a full on beacon of light. At least I can read the
street directory at night now. |
|
|
Grey 57
A.k.a.: Dean
Son of Jim - Creator of Good
Old Grey Cruiser
Posts: 2937
Threads: 355
Registered: August 25th, 2002
Member Is Offline
Location: Phillip Island
Theme: UltimaBB Pro Blue ( Default )
Mood: (OoVoO) (OVO).
|
| posted on October 14th, 2002 at 11:01 PM |
|
|
Don't do what I did and put in a really high watts bulb. Nice and bright , but smell of burning plastic was a bit too much to bear.
Peeed off with myself, let me tell you. The early oval ones are getting hard to find in good nick. 
|
|
|
mnsKmobi
Wolfsburg Wizard
Posts: 589
Threads: 27
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 15th, 2002 at 09:07 AM |
|
|
Had the same problem. Two causes:
The passengers door had a blank instead of a switch!
The drivers door switch innards had corroded.
This has been about the only simple to fix item on my Kombi.
|
|
|
KOM123
Custom Title Time!
Smiling Assassin
Posts: 1164
Threads: 121
Registered: August 26th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always cheery!
|
| posted on October 15th, 2002 at 09:14 AM |
|
|
Anyone able to post digi-pics on where I should be looking on the doors for the switches?
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 15th, 2002 at 10:57 AM |
|
|
No, but they're not hard to find. They're mounted in the car body, not in the doors. Open the driver's door wide, and have a look at
the front of the opening. You will firstly see two large Phillips screws that hold the edge of the dashboard to the body. The door light switch is
about 5cm below the bottom screw. It unscrews with a little Phillips screw. Pull it out, check that the wire is attached, the contact is clean and the
button moves freely with its spring loading.
I assume you're talking about the interior light in the driver's cabin, and not the rear interior light (Microbus). The driver's
interior light has a three-way switch. CENTRE is OFF. Moving the switch to the FORWARD position turns the light ON continuously. Moving the switch to
the REAR position activates the door switches, so that the light is ON with the front door(s) open, and OFF with the door(s) closed.
The Microbus rear light can be turned on from the driver's position - there is a knob on the dash next to the cooling fan and headlight knobs.
|
|
|
KOM123
Custom Title Time!
Smiling Assassin
Posts: 1164
Threads: 121
Registered: August 26th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always cheery!
|
| posted on October 15th, 2002 at 02:06 PM |
|
|
Yes it's the light near the interior cabin. I had a look where you suggested (not a thorough look yet) and the first thing I have noticed is that
there is only a switch on the driver's side, not the passenger side. Is this going to cause it not to work?
|
|
|
mnsKmobi
Wolfsburg Wizard
Posts: 589
Threads: 27
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 15th, 2002 at 04:07 PM |
|
|
"I have noticed is that there is only a switch on the driver's side, not the passenger side. Is this going to cause it not to work?"
Only when you open the passenger's door.
|
|
|
KruizinKombi
A.k.a.: Col
Bishop of Volkswagenism
Seriously Obsessed Cyber Dubber
Posts: 3493
Threads: 104
Registered: August 25th, 2002
Member Is Offline
Location: Gippsland, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
|
| posted on October 15th, 2002 at 09:52 PM |
|
|
Not all kombi's had the light switch on all doors.
My 76 micro has a switch on both front doors AND the sliding door; my 75 kombi has switches only on the front doors; and the one I looked at in the
wreckers the other day only had a switch in the driver's door, with a blanking plate in the others. :o
If you still need photos, let me know.
Kruizin Kol
|
|
|
KOM123
Custom Title Time!
Smiling Assassin
Posts: 1164
Threads: 121
Registered: August 26th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always cheery!
|
| posted on October 15th, 2002 at 10:02 PM |
|
|
Thanks for all your help guys It turns out on proper inspection that
there are switches on the sliding door and driver's door which I pulled apart and cleaned the contacts. The passenger side door has no switch but
the space for one and it looks like there is a wire to be hooked up there but no switch but I'm not 100% sure about that yet. Anyway while
cleaning the switches I found the real culprit was the one on the driver's door as the external button part that is usually depressed when the
door is closed to switch off the light wasn't actually making contact with the door so the light would always remain on. I have since resolved
this by gluing a small rectangluar piece of closed-cell foam to the door so that the button now works when the door closes Voila working light!!! I might still investigate hooking up passenger side
wiring also. As for the yellowish light I disassembled the actual light fitting, gave the cover a good clean and noticed that the actual bulb is
brownish in colour on one side so whilst it has improved after cleaning I'm sure it will be even better with a bulb replacement!
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 17th, 2002 at 05:05 PM |
|
|
Well done!
You've just inspired me. My front door switches work fine, but my Camper is based on a Kombi rather than a Microbus so I have no sliding door
light switch. I was just thinking how convenient it would be to have one on the sliding door, so I will rig one up when I get a free weekend.
Is the sliding door light switch the same part as the front door switches? Where is it mounted in the sliding door jamb? And I wonder where the cables
to it would run? I will try to find a wrecked Microbus and have a look.
I suppose a door switch on the rear hatch is asking too much!
|
|
|
KOM123
Custom Title Time!
Smiling Assassin
Posts: 1164
Threads: 121
Registered: August 26th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always cheery!
|
| posted on October 17th, 2002 at 09:37 PM |
|
|
I will try and take a digi shot tomorrow for you and post it up
|
|
|
11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline
Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n
|
| posted on October 18th, 2002 at 06:59 AM |
|
|
The Microbus light switch is mounted into the B pillar and is the same switch as the front doors...but it has a special block mounted to the sliding
door which makes contact with the switch when its closed. Nothing stopping you making one though :thumb
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
|
|
|
KOM123
Custom Title Time!
Smiling Assassin
Posts: 1164
Threads: 121
Registered: August 26th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always cheery!
|
| posted on October 18th, 2002 at 02:06 PM |
|
|
Doh no fresh batteries for the camera at the moment  The switch is about
10cm below the door catch and as 11CAB says, it appears to be the same as the front switch. Unfortunately also I spoke to soon before, yes the
driver's side switch is working fine now happy about that but the sliding door switch doesn't work. I can't see an easy way to follow
the wiring so I don't think I will be able to fix this one
|
|
|
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 18th, 2002 at 06:02 PM |
|
|
I will have to find a Microbus and have a look.
I was wondering about the wire myself. I can easily patch into the passenger door switch, but how on earth can the wire be fed up the A-pillar, inside
the body across the top of the left door then down the B-pillar? I doubt I could poke a stiff steel wire up there. And external wire would look ugly
and unprofessional.
|
|
|
KruizinKombi
A.k.a.: Col
Bishop of Volkswagenism
Seriously Obsessed Cyber Dubber
Posts: 3493
Threads: 104
Registered: August 25th, 2002
Member Is Offline
Location: Gippsland, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
|
| posted on October 18th, 2002 at 10:26 PM |
|
|
I think you'll have to remove some of the headlining to run the wire, and run it from the top down to the bottom using a plumb-bob on some
string, then tie the wire to it and pull it through. Fishing line and sinkers works too.
As for the circuitry, the switches are in parallel, and run via a grey (I think from memory) wire which should cross the car underneath the dashboard.
Just a thought though.... are the wires already in the pillar ready for the switch for the sliding door?
Kruizin Kol
|
|
|
KOM123
Custom Title Time!
Smiling Assassin
Posts: 1164
Threads: 121
Registered: August 26th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Always cheery!
|
| posted on October 19th, 2002 at 01:52 AM |
|
|
Yes when you remove the switch it even looks as though it's all hooked up but it would be a right royal pain I think to try and trace it back
where it goes without pulling linings apart which I'm a bit scared to do!
|
|
|
KruizinKombi
A.k.a.: Col
Bishop of Volkswagenism
Seriously Obsessed Cyber Dubber
Posts: 3493
Threads: 104
Registered: August 25th, 2002
Member Is Offline
Location: Gippsland, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
|
| posted on October 19th, 2002 at 08:26 PM |
|
|
You have to remember that the door switches are on the earth side of the light.
There is a power wire directly from the fuse panel to the light. The switch can either isolate this completely (fully off); link it to the door
switches, any of which can earth the light to turn it on; or earth it manually.
Therefore, if you want to add extra door switches, all you have to do is run the wire from the new door switch(es) into any point between the existing
door switches and the light. This wire runs from the LH door switch right across the dashboard to the RH switch, so its not hard to find. This wire is
brown or brown/white, not grey as I originally thought.
Kruizin Kol
|
|
|
