Posts: 11
Threads: 4
Registered: January 26th, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on October 1st, 2003 at 01:15 PM
type 3 rust
I have a rust hole that is evident on the passenger side under the bonnet above the wheel, however when looking from under the guard the hole is not
visible, it is obscured by another small panel that is welded into place. The small panel has drain holes which show evidence of rusty water escaping
at some point. Does anyone know the best way to attack this problem?
jonno-t3
A.k.a.: johnathon cooper
Officially Full-On Dubber
Posts: 289
Threads: 53
Registered: April 26th, 2003
Member Is Offline
Location: campbell town, tas
Theme: UltimaBB Pro Blue ( Default )
Mood: stewed
posted on November 7th, 2003 at 09:58 PM
propably cut it out and replace it, if it wasnt originally there. what exactly is it? are we talkin inside the boot area? but not visible from
outside? if it is an original section, attack it with a steel brush on ya drill...and remove as much crap as possible from every place that u can get
too...then use an industrial strength rust converter...
jonno
"if only everything in life was made like a volkswagen"
posted on October 1st, 2003 at 01:15 PM
