Posts: 2306
Threads: 357
Registered: January 24th, 2004
Member Is Offline
Location: Randwick , Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: about 2" off the floor
posted on February 14th, 2004 at 04:38 PM
Decklid stand offs finally fitted
I was having problems fitting my standoffs onto my 67 6v bug that has overiders. thanks for all the advise as i managed to get it sorted. I slacked
off the bumper bar mounts on the body and jumped on the bar bringing it down about half an inch. Then slightly enlongated the holes on the bracket
that holds the bumper bar and pulled that down another quarter of an inch. Hey presto it works although a little tidy up is required before they go on
for good . How happy am i !!! It's the little things folks , the little things!
Danny:thumb:thumb:thumb
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
posted on February 14th, 2004 at 04:38 PM
