| [ Total Views: 844 | Total Replies: 10 | Thread Id: 19761 ] |
|
|
 splittychick
Custom Title Time!
SplittyDelicious
Posts: 1240
Threads: 54
Registered: July 16th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Stoked to be cruisen!
|
| posted on March 3rd, 2004 at 08:40 AM |
|
|
Sanding back my splitty.
I've started the rather large job of sanding back my splitty with an orbital sander.I'm trying to do it as evenly as possible back to the
primer but every now & then theres little bits of bare metal that come through.Is this a major no no or is it not that big a deal??Please
help........i don't want to stuff it up!! |
|
|
twoguns
Compulsive Aussie Vee Dubber
simply aircooled
Posts: 4275
Threads: 226
Registered: November 7th, 2002
Member Is Offline
Location: city, sydney.
Theme: UltimaBB Psyche Grey
Mood: simply cruizin'
|
| posted on March 3rd, 2004 at 08:51 AM |
|
|
i suppose it is whether the sander has dug in or not. if it seems even then you might find you are coming across fill in dips/dints and then hitting
straight metal. as long as its smooth, its probably not a prob. just dont leave it exposed to the air for too long.
Simply Cruzin'...
|
|
|
splittychick
Custom Title Time!
SplittyDelicious
Posts: 1240
Threads: 54
Registered: July 16th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Stoked to be cruisen!
|
| posted on March 3rd, 2004 at 09:52 AM |
|
|
Oh no,i'm not feeling confident about this at all.What do you mean 'expose to air for too long'?How long is too long & what am i
meant to cover it with.Sorry but i'm freaking out a little!!!!:oHELP.:o |
|
|
twoguns
Compulsive Aussie Vee Dubber
simply aircooled
Posts: 4275
Threads: 226
Registered: November 7th, 2002
Member Is Offline
Location: city, sydney.
Theme: UltimaBB Psyche Grey
Mood: simply cruizin'
|
| posted on March 3rd, 2004 at 11:21 AM |
|
|
im not big into doing hte work on me vw's as they seem to excalate. but im so excited that you are gicing it a go. dont panic, and dont lose the
confidence. i think you need some primer paint and when you expose some metal, and after you have finished in that area, give it a coat. not letting
it expose to the air in a raw state will preven thte oxidisation and surface rust. im not sure how long you have, maybe its a few days or a bit more.
but i know from all i read and seen you do need to portect it. thats why when you get a vw blasted you get it coated in something as well.
Simply Cruzin'...
|
|
|
twoguns
Compulsive Aussie Vee Dubber
simply aircooled
Posts: 4275
Threads: 226
Registered: November 7th, 2002
Member Is Offline
Location: city, sydney.
Theme: UltimaBB Psyche Grey
Mood: simply cruizin'
|
| posted on March 3rd, 2004 at 11:22 AM |
|
|
u2u robk aka 'splitbusaustralia'. he will give you the answers for sure!
Simply Cruzin'...
|
|
|
Sky
Officially Full-On Dubber
Posts: 251
Threads: 43
Registered: September 4th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 3rd, 2004 at 12:11 PM |
|
|
in 2 days my superbug started rusting, took 2 weeks for my 62.
|
|
|
5PL1TDCS10N
Insano Dub Head
Posts: 845
Threads: 129
Registered: January 13th, 2003
Member Is Offline
Location: Perth, W.A
Theme: UltimaBB Pro Blue ( Default )
Mood: Oblivious
|
| posted on March 3rd, 2004 at 03:59 PM |
|
|
Hey Splittychick,
When using the orbital go from one side of the panel to the other evenly.
Exposed steel- make sure the panel is clean and dry and paint some Etch Primer(avai from most auto shops)
Raw steel rusts instantly but only becomes a problem when the rust becomes visual.
You can get it in spray can form or in a 1ltr tin. Get some Acrylic thinner while you're there for clean ups/thinning etc
Hope this helps-W
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on March 3rd, 2004 at 05:31 PM |
|
|
Definitley make sure you keep the sander flat and moving side to side.
Yep if you stop in one spot and hold the edge of the sander down you will get a dip. This results in ripples showing later.
What grit paper are you using. 180 is a good one to start with to remove scratches and imperfections if you are not stripping all the paint off.
|
|
|
splittychick
Custom Title Time!
SplittyDelicious
Posts: 1240
Threads: 54
Registered: July 16th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Stoked to be cruisen!
|
| posted on March 4th, 2004 at 08:23 AM |
|
|
Yep its a 180 i'm using.There seems to be 3 coats of paint or primer.(or is it the top coat,undercoat & primer?)I think on the top half is a
white house paint,then theres a deep red colour,then the grey,then metal.It feels really smooth having a combination of the red & the grey showing
but does that mean that its totally uneven???????I'm starting to think that maybe i should just pay someone to do it!!I'm scared i'm
going to ruin it. |
|
|
twoguns
Compulsive Aussie Vee Dubber
simply aircooled
Posts: 4275
Threads: 226
Registered: November 7th, 2002
Member Is Offline
Location: city, sydney.
Theme: UltimaBB Psyche Grey
Mood: simply cruizin'
|
| posted on March 4th, 2004 at 08:30 AM |
|
|
i dont think cause you can see more than one colour it would mean that it is uneven. just take your time and look and feel with your hands, and anywya
you will coat it with a primerfiller. then hand sand it so it should come up good.
Simply Cruzin'...
|
|
|
splittychick
Custom Title Time!
SplittyDelicious
Posts: 1240
Threads: 54
Registered: July 16th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Stoked to be cruisen!
|
| posted on March 4th, 2004 at 08:37 AM |
|
|
Thanx twoguns,i really am keen to do it myself as out of all the things to do in the resto i feel this is one i can do.I just get a liitle scared i
spose that i might stuff it up & end up paying someone anyway.I need to just have more confidence in my own ability & as long as i keep coming
in here & picking all your brains i reckon it should be o.k!Thanx again. |
|
|
baybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported
|
| posted on March 4th, 2004 at 09:19 PM |
|
|
if ur really in doubt, find a panel thats supposed to be flat and lay the sharp edge of a ruler against it and see whether there are any big gaps
beneath it.
Reimagined/Recycled/Upcycled Cool
|
|
|
splittychick
Custom Title Time!
SplittyDelicious
Posts: 1240
Threads: 54
Registered: July 16th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: Stoked to be cruisen!
|
| posted on March 5th, 2004 at 06:58 AM |
|
|
Thanx Ryan,all the help you guys are giving is invaluable.:thumb:thumb:thumb
I'll keep you all updated. |
|
|
