| [ Total Views: 1093 | Total Replies: 6 | Thread Id: 39156 ] |
|
|
 holdenhead
Casual Dubber
Posts: 43
Threads: 16
Registered: April 25th, 2005
Member Is Offline
Location: windy SE melbounre
Theme: UltimaBB Pro Blue ( Default )
Mood: Undesided
|
| posted on May 15th, 2005 at 01:27 AM |
|
|
Ball joint or king pin???????
I have a 63 split an just wanting comments on lowered ball joint with adjusters vs lowered king pin with dropped spindles???? I am leaning slightly
tarwards king pin but wondering about ball joint. Rear of my bus is gonna be straight axle. To get the ball joint front i have that low it would have
to drop about 4.5 to 5 inchs. Would the ride be to hard??? cost to rebuild either??? Any advise would be great.
|
|
|
t2
Custom Title Time!
stop taking life so serious
Posts: 1102
Threads: 206
Registered: March 11th, 2004
Member Is Offline
Location: penrith
Theme: UltimaBB Pro Blue ( Default )
Mood: tired
|
| posted on May 15th, 2005 at 09:40 AM |
|
|
you can buy dropped spindles for ball joint beams but they will widen your track width by 12mm a side and only offer a 2.5 inch drop , you could also
fit bay discs on that beam but it will change your stud pattern, so if you want to keep the original stud pattern you will have to use adaptor plates
or buy wide 5 discs which are around $1300 set but worth the cash i think or use wide 5 drums, not to sure what years the wide 5 drums were on in
regards to bay windows
if you use a link pin beam the dropped spindles will lower the bus 3.5 inches and the torsion tubes are closer together so it will be lower than the
ball joint beam straight away, then if you fit adjusters aswell you can get it on the deck, also the dropped spindles wont widen the track width. but
if you want discs and are not much of a engineer like rob k who made up his own front discs for a link pin beam, the only option is to keep the front
drums or buy wide 5 discs but as i said before not to cheap, but i like the wide 5 discs and will be investing myself .
i hope that helps and didnt confuse you to much
cheers darren
[Edited on 14/5/2005 by t2]
gravity wont get you high
|
|
|
holdenhead
Casual Dubber
Posts: 43
Threads: 16
Registered: April 25th, 2005
Member Is Offline
Location: windy SE melbounre
Theme: UltimaBB Pro Blue ( Default )
Mood: Undesided
|
| posted on May 15th, 2005 at 02:03 PM |
|
|
thanx for your thoughts. At the moment i'm not really interested in disc's as I want my bus stock but low and i want higher gearing as i live a fair
way out and have to travel on the fwy where ever i want to go. i have just pulled the front end that was in it out which is from a 68 bay, and at the
moment looking to swap for a king pin front if someone is interested. I think the king pin front is a better option for me. I will be after some
dropped spindles shortly if someone can get in contact with Rob K as i heard they are A1. Thats if he still does them. ta Rick
|
|
|
Kombi_Rescue
Wolfsburg Wizard
Posts: 440
Threads: 35
Registered: February 26th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: DSK member
|
| posted on May 15th, 2005 at 05:15 PM |
|
|
dont know where you live but an old timer vw mechanic can reset the link pin stack and presto you have a dropped spindle..the tool is important ...do
a little more investigation..the ride quality is better than the ball joint as is the turning circle.cheers dsk steve
|
|
|
57kombi
Son of Jim - Creator of Good
Hannover Elder
Posts: 2544
Threads: 181
Registered: August 27th, 2002
Member Is Offline
Location: adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: Got one, but keeping it under wraps
|
| posted on May 15th, 2005 at 06:01 PM |
|
|
I am using a set of Robs spindles on a K&L front and a straight axle.
Runs really nice and is quite low.
I feel a photo op.
Cheers
Dave
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
kombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline
Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows
|
| posted on May 15th, 2005 at 06:48 PM |
|
|
i have a straight axle convertion in mine and just adjusters up front on a stock linkpin beam
the ride is not that bad if you just want the front to match the rear ,but i dropped mine down as low as she goes
so she rides a bit rough but still drivable.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
|
|
|
holdenhead
Casual Dubber
Posts: 43
Threads: 16
Registered: April 25th, 2005
Member Is Offline
Location: windy SE melbounre
Theme: UltimaBB Pro Blue ( Default )
Mood: Undesided
|
| posted on May 15th, 2005 at 10:19 PM |
|
|
so it seems king pins win!!!! now i just have to find someone with a king pin front who wants to swap for my ball joint front in melbourne. I really
dont want to give a wrecker my ball joint front + $150 smackers to get a king pin front. go on swap me a smelly old rebuildable king pin front for my
road worthy ball joint front. you know you wana!!!!!!
|
|
|
