| [ Total Views: 1069 | Total Replies: 23 | Thread Id: 42843 ] |
|
|
 DubCrazy
A.k.a.: steff
Custom Title Time!
Posts: 1295
Threads: 145
Registered: July 18th, 2003
Member Is Offline
Location: Gladstone Qld
Theme: UltimaBB Pro Blue
Mood: painting anything in front of me
|
| posted on August 15th, 2005 at 08:55 PM |
|
|
help needed with engine
heya all... need a little help with my new engine
i have just bought it and there are a couple of things that i am not sure about .... i am guessing its a type 4 that has had an upright fan
housing put on.. am i right?..
ok... now the main concerns,,,, on the right hand side as u look a the engine is some sort of pipe work.. what the hell is it for?
on the other side where the oil sender normail is is some sort of pipe that is blocked of and above it is the oil sender this right? now last one
on this bit... dipstick.. i know this sounds stupid but where the hell is it.. i looked all over for it and nothing... pic of all the above
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Life with out a v-dub is no life at all!!!!!
|
|
|
DubCrazy
A.k.a.: steff
Custom Title Time!
Posts: 1295
Threads: 145
Registered: July 18th, 2003
Member Is Offline
Location: Gladstone Qld
Theme: UltimaBB Pro Blue
Mood: painting anything in front of me
|
| posted on August 15th, 2005 at 08:59 PM |
|
|
now last one... engine number? where would i find it... its not in the normal place(type1) and i found a vw stamp and numbers on the right hand side
of the sump... thses wouldnt be it would it? i guess they are just a part number for the sump any ideas?? also the oil cooler... it doesnt seem to
ahve the upright style, now i have not taken the fan houseing off yet but there is no section that sticks out like noraml.. would it be a smaller one
or are the pipes i asked about soemthing to do with it? sorry to be a bloody pain but i got a good price on teh engine(thanks gorn) and i have just
had it shiped from perth to Qld.. last bit of the puzzle to get my car on the road... so i am jumping up and down a bit to get it done:P
thanks for any help...
steff..................
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Life with out a v-dub is no life at all!!!!!
|
|
|
 barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on August 15th, 2005 at 09:05 PM |
|
|
it doesnt look like a t4 but i could be wrong, it actually looks like a type 3 motor
|
|
|
HotRodMatt
Wolfsburg Elder
If it's old or rare - cut it!
Posts: 3616
Threads: 361
Registered: September 3rd, 2002
Member Is Offline
Location: West of Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 15th, 2005 at 09:08 PM |
|
|
Was a type 3 engine...
|
|
|
DubCrazy
A.k.a.: steff
Custom Title Time!
Posts: 1295
Threads: 145
Registered: July 18th, 2003
Member Is Offline
Location: Gladstone Qld
Theme: UltimaBB Pro Blue
Mood: painting anything in front of me
|
| posted on August 15th, 2005 at 09:10 PM |
|
|
could well be barls.... i really have no bloody idea... its got great compression tho...
i knows it will all fit the baja just need to knows the few little bit.. i want my car on the road!!!!!!
steff
Life with out a v-dub is no life at all!!!!!
|
|
|
barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on August 15th, 2005 at 09:12 PM |
|
|
hey steff i got the same motor in the bug im driving they only need to have a few things changed to be type 1
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on August 15th, 2005 at 09:15 PM |
|
|
The engine is not a type 4, maybe an early type 3.....................the engine number will be on the top of the case, under the fan housing in the
middle........or it maybe a "new" factory case....... the pipe on the lower right is where the original type 3 dipstick went ( you need to buy a
type 3 to type 1 dipstick adapter kit if fitting to a beetle).....................oil cooler can be mounted the same as a type one, either in the fan
housing(older style) or external "dog house" to the fan housing (later style)............as for the pipe under the sender WTF !!!
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on August 15th, 2005 at 09:19 PM |
|
|
May also be a 1916cc as it looks like it has machined down head studs (hard to tell in the photo)??
|
|
|
DubCrazy
A.k.a.: steff
Custom Title Time!
Posts: 1295
Threads: 145
Registered: July 18th, 2003
Member Is Offline
Location: Gladstone Qld
Theme: UltimaBB Pro Blue
Mood: painting anything in front of me
|
| posted on August 15th, 2005 at 09:37 PM |
|
|
the size i am not totaly sure about...1776 was sugested by the person i bought it off but they bought it from someone else so they wer no totaly
sure of what was done....
so magic i have an answer as to what it is..type 3 cool.. now in the morning i will look for engine numbers.,... as for the type3 to type 1 dipstick
kit.. any ideas where i can get one??
thanks craig u are a champ :thumb
steff.........
Life with out a v-dub is no life at all!!!!!
|
|
|
DubCrazy
A.k.a.: steff
Custom Title Time!
Posts: 1295
Threads: 145
Registered: July 18th, 2003
Member Is Offline
Location: Gladstone Qld
Theme: UltimaBB Pro Blue
Mood: painting anything in front of me
|
| posted on August 16th, 2005 at 06:43 PM |
|
|
ok only the funny pipe blocked off on the side off the oil sender to work out any ideas????????
also the dipstick converter wher would be best to get one??
cheers all
steff...............................
Life with out a v-dub is no life at all!!!!!
|
|
|
76camper
Fahrvergnugen
Posts: 884
Threads: 89
Registered: January 13th, 2005
Member Is Offline
Location: sydney, northern beaches
Theme: UltimaBB Pro Blue
Mood: happy :-)
|
| posted on August 16th, 2005 at 08:36 PM |
|
|
That tube under the pressure switch is most probably because the P.O tapped into an oil gallery for an external oil cooler or something and that is
just a plug. (just a guess, duno if there is an oil gallery there on type 3's, maybe some1 else can confirm)
hope this helps
|
|
|
Midlife crisis
Veteran Volks Folk
Nartispuddlejumper, Bureau of Toxicity
Posts: 2282
Threads: 160
Registered: May 17th, 2003
Member Is Offline
Location: Logan city south of Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Wornout and Toxic
|
| posted on August 16th, 2005 at 09:49 PM |
|
|
Your local VW guy may have the dipstick adapter. I got a Empi one from Leons Motors in salisbury.
Only $15.00. If your loacal guy can't help may be able to get one and have it sent up in the mail.
marc
If you can't laugh at yourself you can't laugh at anyone else! Because life is to short not to LAUGH
|
|
|
*did*
A.k.a.: Steve
Posts: -16
Threads: 0
Registered: September 10th, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: happy 
|
| posted on August 16th, 2005 at 11:44 PM |
|
|
From what I can tell, the type 3 cases are just type 1 cases with the engine number and dip stick hole in a different spot. |
|
|
hus22l
Officially Full-On Dubber
Posts: 229
Threads: 36
Registered: April 24th, 2012
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 13th, 2014 at 08:18 PM |
|
|
Very old thread. But curious. What a are the pros and cons of converting a type 3 case for use as a type 1?
If there is a thread on this point me too it - I am looking for it
|
|
|
ACE76
Seriously Crusin Dubber
Posts: 105
Threads: 19
Registered: August 4th, 2005
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Purple
Mood: ACE 30 FOR SALE!
|
| posted on June 13th, 2014 at 11:46 PM |
|
|
The cases themselves should be much the same with some minor external differences.
I think generally type 3 cases can be readily converted to type 1: main thing is need to fit a dipstick tube into correct place (drill a hole), and
blank-off large oil-hole at bottom of case. Not sure how easy it is to fit the oil pressure switch into the beetle's position (type 3 has it mounted
on oil cooler).
Generally type 1 cases don't convert as easily to type 3. Need to provide the large oil-filling hole at bottom (plus its 2 studs) -- and IRS type
3's need mounting points for the large cross-mount bar at the rear - may not be possible to attach? Hope someone has more definite answer.
BUT after a certain year (around 1970 or 71 ??? not sure), such cases are "Universal" and should be more easily set up for either type 1 or 3.
ACE 30 & ACE 40 oil: specially formulated for your Air Cooled Engine...
Delivery free Outer Eastern Melb. & Dandenong Ranges.
from$19 for 2.5L (spot-on for 1 fill, re-use bottle to measure), or $29 for 5L (2 fills)
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 14th, 2014 at 11:32 AM |
|
|
| Quote: | Originally
posted by ACE76
BUT after a certain year (around 1970 or 71 ??? not sure), such cases are "Universal" and should be more easily set up for either type 1 or 3.
|
Little bit of a blanket statement there, not entirely true.
The universal cases sold by VW Germany, Brazil and Mexico were never fitted to 71 on cars from the factory.
They were just your basic AS41 dual releif case but had the cradle points for Bay window bus and type 3 but also had a type1 dipstick tube and oil
pressure sender port below the dist, type 3 engines never had those and the factory bay window upright engines never had the type 3 filler port just
the cradle mounting points.
No factory Beetle cases had the cradle mounts or type3 oil filler
Fitting a type 3 engine in a bug or bay is a PITA as they have no oil pressure sender and need the adpater dipstick and fitting a bug or bay engine in
a type3 is a PITA as they have no dipstick port and need one of those cheesy oil pump cradle adapters.
So replacement case were universal they had all those features.
|
|
|
hus22l
Officially Full-On Dubber
Posts: 229
Threads: 36
Registered: April 24th, 2012
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 14th, 2014 at 01:13 PM |
|
|
"PITA" ?
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 14th, 2014 at 01:36 PM |
|
|
Pain In The Arse
Futue te ipsum!!!
|
|
|
ACE76
Seriously Crusin Dubber
Posts: 105
Threads: 19
Registered: August 4th, 2005
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Purple
Mood: ACE 30 FOR SALE!
|
| posted on June 15th, 2014 at 02:25 PM |
|
|
Thanks Joel, that's the sort of clarification I meant. Sort of thinking "more unviersal" in application vs. true Universal Case. (And I thought
PITA was some sort of oriental bread. Woops). But is it possible to drill and tap the oil pressure switch into a type 3 case, in the type 1
position? Or does it all have to be dismantled. Ditto the dipstick tube...?
ACE 30 & ACE 40 oil: specially formulated for your Air Cooled Engine...
Delivery free Outer Eastern Melb. & Dandenong Ranges.
from$19 for 2.5L (spot-on for 1 fill, re-use bottle to measure), or $29 for 5L (2 fills)
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 15th, 2014 at 09:36 PM |
|
|
All the type 3 blocks I;ve seen have had the boss there for the sender its just not drilled out.
Unfortuntaly drilling it out means a full tear down to clean out the passages after.
Another alternative is to use the type 3 oil cooler and mount the sender in it.
Was an old showcar trick to tidy up the engine bay, just takes a 90 degree fitting and some trimming of the doghouse.
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on June 16th, 2014 at 08:11 AM |
|
|
!!! I have a type 3 engine too but 1600cc. I converted it to upright in my baja from a variant.
| Quote: | Originally
posted by hus22l
Very old thread. But curious. What a are the pros and cons of converting a type 3 case for use as a type 1?
If there is a thread on this point me too it - I am looking for it
|
The type 3 1500 cases are risky, as many didn't have separate cam bearing shells! They are a slightly beefed up 1200cc case, none the less bored out
to 1500cc.
Once the bores are worn for the cams, its worn. As the bearing surface is actually the case. I had one myself but moved on to alum case for a
project.
As said though, this isn't all type 3 engines.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
ACE76
Seriously Crusin Dubber
Posts: 105
Threads: 19
Registered: August 4th, 2005
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Purple
Mood: ACE 30 FOR SALE!
|
| posted on June 17th, 2014 at 03:37 PM |
|
|
Quote (from Joel): "...and need one of those cheesy oil pump cradle adapters."
Joel, could you explain please what the oil pump cradle adapter is, if possible? Do you just mean the large bar that makes up the rear engine mount,
attaching to the case with the 3 bolts ?
[We have a 1976 beetle with an original engine, that has an AS 21 case. Don't know when these started, but must have been quite late in Aust., for type 1. All the other original S'bug & type 3 engines we've had from 1970 on have been AS 41, as far as known.]
ACE 30 & ACE 40 oil: specially formulated for your Air Cooled Engine...
Delivery free Outer Eastern Melb. & Dandenong Ranges.
from$19 for 2.5L (spot-on for 1 fill, re-use bottle to measure), or $29 for 5L (2 fills)
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 17th, 2014 at 06:26 PM |
|
|
It's just an adapter so you can fit the Type3 or Kombi cradle bar to a Beetle engine if it doesnt have the 3 mounting points.
They pick up the 4 oil pump bolts and the lower case bolt.
Supporting the engine and gearbox using only those is not a good idea long term.
One of the spare engines I had came with one.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
ACE76
Seriously Crusin Dubber
Posts: 105
Threads: 19
Registered: August 4th, 2005
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Purple
Mood: ACE 30 FOR SALE!
|
| posted on June 18th, 2014 at 06:27 PM |
|
|
Thanks Joel, have never seen one of those (perhaps just as well). Hope all that clarifies the interesting type 1 to 3 -- and type 3 to 1 question!
ACE 30 & ACE 40 oil: specially formulated for your Air Cooled Engine...
Delivery free Outer Eastern Melb. & Dandenong Ranges.
from$19 for 2.5L (spot-on for 1 fill, re-use bottle to measure), or $29 for 5L (2 fills)
|
|
|
