Board Logo
Go To Bottom

Printable Version  
[ Total Views: 6220 | Total Replies: 9 | Thread Id: 64596 ]
Author: Subject:  1974 Beetle starter motor problems
Memberodapbr
A.k.a.: Paul & La Vergne Lehmann
Commited Dubber
**


Avatar


Posts: 59
Threads: 15
Registered: December 22nd, 2003
Member Is Offline

Location: Dimboola, Western Victoria
Theme: UltimaBB Psyche Green
Mood: Bugged five times and still learning!

posted on August 26th, 2007 at 03:57 PM
1974 Beetle starter motor problems


Can someone offer some advice please? Our '74 beetle 1600 has a slow starter that sounds like it isn't able to turn over properly. Sounds slugish. Battery is fully charged now and it seems to be an intermittent problem. Have it up on blocks with easy access to area but can find only one bolt to remove from the engine block housing at the seven o'clock position, the other one at the one o'clock position is rounded. Is it accessable from within the engine Bay???



Pomponderoo Bush Retreat WINNER POWERCOR WIMMERA ACCOMMODATION BUSINESS OF THE YEAR AWARD Pomponderoo Boosh Produce, UNDERTAKING THE WIMMERA'S FIRST FOOD FOREST FOR ALL POWERED BY VW SPIRIT AND TENACITY!!!
Memberpod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
*******


Avatar


Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline

Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better

posted on August 26th, 2007 at 04:21 PM



yes as thats where it is undone its one of the four engine bolts



meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/ 
and on Facebook https://www.facebook.com/FlatFour 
Memberodapbr
A.k.a.: Paul & La Vergne Lehmann
Commited Dubber
**


Avatar


Posts: 59
Threads: 15
Registered: December 22nd, 2003
Member Is Offline

Location: Dimboola, Western Victoria
Theme: UltimaBB Psyche Green
Mood: Bugged five times and still learning!

posted on August 26th, 2007 at 04:49 PM



Where in the engine bay is it and do I have to remove the fan shroud to get to it?



Pomponderoo Bush Retreat WINNER POWERCOR WIMMERA ACCOMMODATION BUSINESS OF THE YEAR AWARD Pomponderoo Boosh Produce, UNDERTAKING THE WIMMERA'S FIRST FOOD FOREST FOR ALL POWERED BY VW SPIRIT AND TENACITY!!!
Memberblutopless2
Veteran Volks Folk
DAMSLO
*****


Avatar


Posts: 2457
Threads: 187
Registered: January 8th, 2004
Member Is Offline

Location: melbourne
Theme: UltimaBB Pro Blue

posted on August 26th, 2007 at 09:31 PM



its located between the firewall and the rear of the fan shroud... reach down between them with one hand and a spanner to undo the nut.



see.... air and water do mix ;)

1974 1300
1997 MK3 Golf GL
2003 NB Cabrio
2012 Golf VI GTI
2014 Audi A4 Quattro
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on August 27th, 2007 at 02:07 PM



The bolt should be half rounded...

the nuts are 17mm from memory...

You need to look behind the fan housing...
for the two nuts...
I have no trouble undoing them etc....
apart from jamming your hand down there...

Some people think its too difficult and remove the fan housing to get at them...

Lee

http://community.webshots.com/user/vw68autobug 




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on August 27th, 2007 at 03:46 PM



Hi,
the problem may be the key ignition switch...
these get burnt with the current going thru them..
Waht You need is a Relay mounted near the battery or above the starter motor....
then the power just goes from the battery to the starter motor...

You can also test the strater motor by shorting out the two Large terminals on it...
with a large screw driver...

if the starter is OK, it will turn over quickly...
naturally You have to be careful doing that...

cheers
Lee

http://community.webshots.com/user/vw68autobug 
.




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
MemberDylanTheDubber
Custom Title Time!
*****


No Avatar


Posts: 1252
Threads: 173
Registered: June 5th, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on June 9th, 2009 at 08:37 PM



you might need the starter rebuilt or a new one , the most easy way to see it is lay under the car looking up between the motor and where the motor joins the gear box you will see the startor motor with some wires comming off it , You will see a thick red one , its one of the main ones.
Membergrumble
Son of Jim - Creator of Good
******


Avatar


Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline

Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time

posted on June 9th, 2009 at 09:14 PM



the most common cause of a slow starter motor is the bush in the transmission housing,this is accessed after the starter is removed,have the starter serviced by an auto electrician and replace the bush.90% of the time this rectifies the problem. The ignition switch normally does not give a slow starter operation,more likely an intermittent operation or clicking when operated.
MemberDylanTheDubber
Custom Title Time!
*****


No Avatar


Posts: 1252
Threads: 173
Registered: June 5th, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on June 10th, 2009 at 03:45 PM



yer get it rebushed and should be fine.
Memberkombivw
A.k.a.: David
Wolfsburg Wizard
***


Avatar


Posts: 463
Threads: 54
Registered: March 9th, 2009
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on June 10th, 2009 at 04:37 PM



I am wondering about the obvious. Have you checked all terminals are clean and tight. This includes the place it attaches to starter. That bolt by the way is easier to remove if you jack up the wheel on backdrivers side, remove wheel and twist yr hand in some weird contortions. I am an expert at it now.





  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 41 ] [ PHP: 31.2% - SQL: 68.8% ]