Subject: Crazy physics: Stopping ability does not increase with tyre width ... SOLVED!
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 1st, 2008 at 09:53 PM
Crazy physics: Stopping ability does not increase with tyre width ... SOLVED!
What if i told ya that the stopping ability of your car never increases with wider tyres, nor with extra weight above?
IE: take this for example (If everything was all under control, the tyres don't disintegrate from heat or pressure).
There is a mini minor with bicycle wheels weighing far under a tonne (ie: < 1000kgs for sure). And we have a fully loaded semi trailer weighing 20
tonne, with about a dozen wide tyres. Both tyres are made of the same compound. If both were travelling at the same speed in the same direction, and
at a particular point, at the same time they both locked up all their wheels, the stopping distance will be EXACTLY the same (in a perfect world not
talking into account drag forces etc).
They will have the same stopping distance, despite the difference in tyre width, or pressure/weight those tyres are taking. The only similarity that
gives each vehicle the same stopping distance is the same road surface, and the same tyre compound.
This is what we learnt in first yr physics today :P all repeat of high school stuff, and heres the formulae to prove it:
Function 1: F = m x a (Force = mass x acceleration)
Function 2: f = u x n (f, being the friction force. I couldn't find the funky u symbol for the coefficient of friction, however thats what the u
stands for. & n being the net force downwards due to gravity. IE: weight. Hey!!! i mentioned weight, but u watch, the mass, which is required to
have 'weight' in a sense, will be eliminated in the functions via substitution)
Because friction = u x n, and Force = mass x a,
The value of n, (the weight force), cause its a force, it to can equal to m x a. Because the acceleration downwards of an object is only that of
gravity on a flat road, n therefore equals m x 9.8. (gravity being a value of 9.8m/s/s)
Therefore, f (friction) = u x m x 9.8. This coefficient of friction differs depending on the material, it is a constant however for a particular
material. pretty much a number that means how rough a material is. (IE: a sticky dry road could be say 1.2, a wet road could have a constant of
0.7)
Now, for the finale,
Function 1: F = m x a
Function 2: f = u x m x 9.8
Because F is force, and f is friction force, both are forces, are are therefore the same thing in concept, F = f
SO: F = f
m x a = u x m x 9.8
(Mass on both sides are able to be eliminated)
therefore a = u x 9.8
IE: Acceleration = Coefficent of friction x gravity. Acceleration in this case, being the deceleration of a vehicle, that is the stopping force. 2
objects of same deceleration with the same initial velocity are going to slow down at the same rate, and therefore stop with the same stopping
distance.
Because a = u x 9.8, this deceleration therefore does not depend on the surface area of a tyre, nor the weight above it, nor even how many tyres you
have, but simply the gravitational force and the particular material of the tyre used.
Tripped the hell outta me,
And dad calls me a liar. :P
But try telling that to the phD lectures
REMEMBER: this is tru if every factor were controlled, and there were no drag forces, and other interrupting forces didnt take place. Its just a
simplified version of a real world system, but this concept is honest and tru. IE: VERY REAL.
So for all u nuts wanting more traction, get urselves a good sticky soft tyre
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Volkswagenboy
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 1st, 2008 at 10:01 PM
So all of that physics 'Jargon' just to tell us that we need a softer compound tyre to increase traction?
Did you not play Gran Turismo 1 on drift mode?
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 1st, 2008 at 10:05 PM
lmao :P
nah, i played GT 3 :P gotta luv the sound track too...
Just wanted to save money for all those peeps who should know that vw skinnies can do a great job rather than some fat oldskool cookie cutters or
sumfin... Aesthetics is a whole different story though, but stopping ability is no different with same tyre compound.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
pod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline
Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better
posted on April 1st, 2008 at 10:15 PM
OK Professor Chris Sumner Miller was that to baffle us with
brilliance or bull
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 1st, 2008 at 10:21 PM
Its all truth!
I learnt it today, and am still trying to come to terms with it.
The equations prove it, the doctors teach it,
but in real world concept, its hard to bite.
My 4th yr uni brother had to think twice but found it refered to in his text books, and we tried explainin to dad, but he didn't believe it.
Brenton and i are having a great discussion about it. Like what he has been saying, there are so many other factors that play in the game though.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Volkswagenboy
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 1st, 2008 at 10:33 PM
Ha, nice mention of Professor Julius Sumner Miller, Pod! 'Now why is this so??'
Yeah, I do love these discussions, Chris. I do believe you and I know what you're trying to say. I learnt about the co-efficent of friction and what
not in my 1st year of my apprenticeship.
It is hard to grasp the concept of it all to start off with, but you and I both know that this only applies to the mechanical link between the road
and the tire.
As for...
'Just wanted to save money for all those peeps who should know that vw skinnies can do a great job rather than some fat oldskool cookie cutters or
sumfin...'
If all of your calculations are correct, then by rights if you had 4.5 inch tires you would then be able to steer as effeciently as a 6 inch tire?
Now I'd much rather fat old school cookie cutters as opposed to skinnies when is comes to braking and steering...
Why?
Because your formulae only take into account straight line stopping, but as we all know, when stopping fast you're not always travelling in a
straight line.
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
Volkswagenboy
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 1st, 2008 at 10:39 PM
Ok, so as I sit here I think about when I was 4WDing a while back and had to steer and brake at the same time. I was in mud, with 295 70 R16 equiv.
A/T tires... when the wheels were locked up in the mud steering was impossible. So in this instance 295 tires did just as much as a 185 would.
My question is, would a wider tire lock up or skid sooner or later than a narrow tire under hard braking?
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 1st, 2008 at 10:40 PM
keep an anchor & chain in the passenger seat, it'll stop the car for ya when need be
but ur right dude.
Its a good topic, we need baja wes in here as well.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 1st, 2008 at 10:49 PM
Quote:
Originally
posted by Volkswagenboy
Ok, so as I sit here I think about when I was 4WDing a while back and had to steer and brake at the same time. I was in mud, with 295 70 R16 equiv.
A/T tires... when the wheels were locked up in the mud steering was impossible. So in this instance 295 tires did just as much as a 185 would.
My question is, would a wider tire lock up or skid sooner or later than a narrow tire under hard braking?
-Staggers.
Good question. Offroad wise, the unpredictable surface would be outta my knowledge of what would go on, cause its not controlled as say a constant
bitument stretch. But you would think with this info,a wider wheels purpose would be to allow your tread to have as much surface area to spread itself
around and grasp onto the offroad surface that has the most friction. If you have a surface thats combined with stones, sand, hard dirt, and clay all
in one, the greater surface area of the tyre, the more chance you have of driving over say the higher friction surface portion then the lower. (i
would assume)
The greater surface area wouldn't allow it to stop quicker, but to find a more greater friction surface, i would assume, given what i was told. and
in finding this surface, would make u stop quicker than on a slippery surface. around corners though, the friction concepts are said to be the same in
perfect world situations, and bigger tyres around corners offroad wuld do the same.
Oh, and bigger depth in the tread would allow water and soft mud to move around and allow the tread to touch the higher friction ground surfaces.
locking up wise though... hmm. VERY good question. If both the skinny and wide tyre are made of the same compound, they therefore have the same
coefficient of friction. and seeing that friction force = mass x 9.8, the friction of the tyre would be no different for the same weight vehicle, and
therefore would not lock up any differently, in a perfect situation that would allow u to compare.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 1st, 2008 at 10:52 PM
ie: they would lock up at the same time under hard braking cause they involve the same friction.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Volkswagenboy
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 1st, 2008 at 11:05 PM
Yes, but they do not have the same mass.
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
posted on April 1st, 2008 at 11:11 PM
I don't believe that is correct in Our world..
maybe OK in a book and perfect world??
Talk to someone running 135s or 145 front tyres on their beetle and see if they can pull up as good as with 165 tyres on the front...
especially if the road is wet...
I owned back in the 70s a Renault R10 which had 4 wheel disc brakes and 135 x `15 Michelin tyres standard.
I had the rims widened and fitted 165 x 15 tyres as the narrow ones used to scare the hell out of me...
so, I still don't believe it...
narrow tyres will lock up much easier than wide ones...
the road surface also comes into it...
smooth or rough - wet or dry??
its NOT a perfect world out there...
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
LUFTMEISTER
Veteran Volks Folk
Posts: 2041
Threads: 119
Registered: July 13th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: BRISVEGAS in a state of flux
posted on April 1st, 2008 at 11:26 PM
what day is it? A=april F = fool
Customer service is not dead in Australia.
Always after HAZET & MATRA & VW factory tools
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 1st, 2008 at 11:34 PM
luv causing a stir
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Notch Nut
Custom Title Time!
Posts: 1011
Threads: 37
Registered: April 26th, 2006
Member Is Offline
Location: unknown
Theme: UltimaBB Pro Blue ( Default )
posted on April 2nd, 2008 at 09:28 PM
WTB (Vic) Bicycle wheel rims in 5 stud pattern with 15" diamater to suit type 3.
I would also consider some 22" rims if they came with white wall tyres. Send U2U
If you can't fix it with a hammer,
you have an electrical problem....
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 2nd, 2008 at 10:04 PM
just make sure u get good a good tread compound
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Notch Nut
Custom Title Time!
Posts: 1011
Threads: 37
Registered: April 26th, 2006
Member Is Offline
Location: unknown
Theme: UltimaBB Pro Blue ( Default )
posted on April 3rd, 2008 at 04:47 PM
I have a doctors certificate for temporary insanity. Will this suffice??
If you can't fix it with a hammer,
you have an electrical problem....
baybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported
posted on April 3rd, 2008 at 04:49 PM
thing that is being missed is that it is generally better toi stop without skidding - much quicker then with skidding! the math also estimates the
friction as a 'point load' rather then taking into account the contact area of teh tyres, which again would vary depending on tyre pressures
Reimagined/Recycled/Upcycled Cool
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
posted on April 3rd, 2008 at 04:53 PM
Nice work Chris, had a big think and came up with some questions:
Wouldn't that solution actually only be expressed with regards to the kinetic energy potential of the differently massed vehicles, and therefore only
apply if no external force other than gravity was applied: i.e if the vehicles rolled to a stop without external braking force, wind resistance
etc.?
Tyre to ground friction is a tiny component of the friction force in this 'lock up' context, most of the stopping force is applied by friction in
the highly different mechanical systems of the vehicles brakes themselves, so wouldn't that friction force be far more accurate as an equational
variable? If a braking force (delta v) is applied, then wouldn't this equation be more applicable:
If an object with mass, m, traveling at speed v, is opposed by a constant force F (delta v again so a negative number), then F = ma (Newton's law).
So the acceleration is F/m and the mass will stop when v- (F/m)t = 0 or when t= mv/F. Therefore, surely the objects' mass is directly proportional
to the time it takes to stop, even in a 'perfect system'?
Surely mass can be cancelled out in a 'perfect system' with regards only to kinetic potential and not inertial mass?
Confusing, good fun, but!
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
Notch Nut
Custom Title Time!
Posts: 1011
Threads: 37
Registered: April 26th, 2006
Member Is Offline
Location: unknown
Theme: UltimaBB Pro Blue ( Default )
posted on April 3rd, 2008 at 04:54 PM
Skidding is nothing more than drifting for cars lacking in horsepower but making up for it with their drum brakes.
The mathematics is well beyond my level of comprehension. Logic is more preferable for laymen and plebs that can't do the math...
If you can't fix it with a hammer,
you have an electrical problem....
Warrenm
Wolfsburg Wizard
Posts: 466
Threads: 98
Registered: August 6th, 2004
Member Is Offline
Location: Western Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: Cruising & Happy
posted on April 3rd, 2008 at 08:13 PM
That is nearly as good as the Michael Schumacher story of him returning to Ferrari for 2 seasons from next race for $100,000,000 per year
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 3rd, 2008 at 08:56 PM
Just one thing, if I had two sets of tyres... one had compound of 0.5 and was 10 inches wide, and another set of tyres which had a compound of 1.0 but
were 5 inches wide... Wouldn't that be an equal rating?
Yes? No?
So if someone had a 4.5 inch wide tyre with a compound rating of 0.7 and they wanted a 6 inch wide tyre with the same compound rating... wouldn't
increase the friction caused by the skidding tyre?
The formulae you show does not take into account surface area of the tyre so how can you prove anything??
Another thing... if the surface area didn't matter, only the friction compound... then why are brake pads and rotors becoming larger and larger?
There's no difference between the tyre and brake formulae.
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
Volkswagenboy
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 3rd, 2008 at 11:00 PM
Although a larger area of contact between two surfaces would create a larger source of frictional forces, it also reduces the pressure between the two
surfaces for a given force holding them together. Since pressure equals force divided by the area of contact, it works out that the increase in
friction generating area is exactly offset by the reduction in pressure; the resulting frictional forces, then, are dependent only on the frictional
coefficient of the materials and the FORCE holding them together.
If you were to increase the force as you increased the area to keep PRESSURE the same, then increasing the area WOULD increase the frictional force
between the two surfaces.
It is true that wider tires commonly have better traction. The main reason why this is so does not relate to contact patch, however, but to
composition. Soft compound tires are required to be wider in order for the side-wall to support the weight of the car. softer tires have a larger
coefficient of friction, therefore better traction. A narrow, soft tire would not be strong enough, nor would it last very long. Wear in a tire is
related to contact patch. Harder compound tires wear much longer, and can be narrower. They do, however have a lower coefficient of friction,
therefore less traction. Among tires of the same type and composition, here is no appreciable difference in 'traction' with different widths. Wider
tires, assuming all other factors are equal, commonly have stiffer side-walls and experience less roll. This gives better cornering performance.
So there we have it... in laymans terms Chris is correct in saying that tire width has nothing to do with the traction meaning you'll still have the
same 'lock up' braking distance.
Get a skinny tire guy to buy a wider yet identical in compound tire and he'll have no improvement in braking, only steering.
In a perfect world Chris is right...
The really scary part is even in the real world he is actually 100 percent correct.
There you have it...
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
Volkswagenboy
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 3rd, 2008 at 11:09 PM
Here's the formula mentioned above... which Chris should really have put in his first post...
Pressure equals force divided by the area of contact;
P=f / a
So lets say we have a tire with a contact area of 50" square, and a force, in other words wieght, is about 200 pounds...
P=200/50
P=4 pound/square inch (PSI)
Double the area...
P=f / a
P=200/100
P=2 pound/square inch (PSI)
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 3rd, 2008 at 11:15 PM
hey Brenton,
i told ya u should be a mechanical engineer with me dude
we can both end up looking like this:
very hot ...
The concept of it all still trips me out big time...
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Volkswagenboy
A.k.a.: Brenton Barry
Veteran Volks Folk
Staggers Automotive.
Posts: 2437
Threads: 92
Registered: July 28th, 2005
Member Is Offline
Location: Boronia Heights, Brisbane.
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
posted on April 3rd, 2008 at 11:28 PM
Well it was either own a business or further my education, I chose the business...
No doubt I'll learn these things along the way.
-Staggers.
STAGGERS AUTOMOTIVE - Heavy Vehicle Diesel Specialist
JB CUSTOMS & CLASSICS - Car Builders
2/53 Tradelink Drive, Browns Plains
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on April 4th, 2008 at 07:34 AM
AH HUH! Nice thoughts Michael. YOU ARE RIGHT!
However!
That formula works! But that force that you speak off that slows down the vehicle, is the frictional force.
F (Frictional force) = u x m x 9.8
u being the coefficient of friction
m being the mass
9.8m/s/s being gravity
Therefore when you substitute the frictional force equation in the denominator of your equation set, the mass therefore cancels out with the
numerator, and hence mass is eliminated from your set of equations. You were almost there man!
As for tyre to road friction, despite whether braking mechanisms are working or not, they all only retard the spinning of the wheels, not the car's
velocity. The only thing that slows down the car is the friction between the bitumen and the tyre, otherwise the wheels would consistantly lock up due
to the braking mechanisms and hence the car would keep sliding along the road (if friction was very small)
If the car was rolling to a stop, or braking suddenly, it will always be using the road as its only base for stopping.
Well, thats my opinion anyways man.
Your right though, confusing, but fun!
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Ampdub
Officially Full-On Dubber
Posts: 310
Threads: 44
Registered: May 24th, 2006
Member Is Offline
Location: Brisbane, North
Theme: XMBX Pro Green
posted on April 4th, 2008 at 12:03 PM
Ok just trying to remember some physics here but when talking about friction should you not put your accelleration in relation to angles of incidence,
otherwise you will be using 9.81 as a coefficent of drag not gravitational force.
sorry dont have any of my old uni books to refer to as i had to trade them otherwise i would have some fancy equasions to add.
Pastit
Seriously Crusin Dubber
Posts: 150
Threads: 16
Registered: February 9th, 2008
Member Is Offline
Location: Bush
Theme: UltimaBB Pro Blue ( Default )
posted on April 4th, 2008 at 03:39 PM
They say that people who "Intelchooilize" things are making up for inadequies in the "Bedroom flute" department. Any truth?
LIFE IN THE LOW LANE
A.k.a.: Brennden Alder
Son of Jim - Creator of Good
All people have the right to stupidity but some abuse the privilege
Posts: 2534
Threads: 53
Registered: March 11th, 2007
Member Is Offline
Location: Murrumba Downs - Brisbane
Theme: UltimaBB Pro Orange
Mood: What Kombi wants vs what Kombi gets are nowhere near the same...
posted on April 4th, 2008 at 06:04 PM
If only you guys put as much effort into your cars as you have "theorising" this idea then they'd be the best cars going around!!!
[size=4] ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE[/size]