| [ Total Views: 4325 | Total Replies: 8 | Thread Id: 69985 ] |
|
|
 vassy66T1
A.k.a.: Marcus Vass
Veteran Volks Folk
Wow ... are U reading this?
Posts: 2120
Threads: 76
Registered: June 4th, 2003
Member Is Offline
Location: Brisvegas
Theme: UltimaBB Streamlined2
Mood: Happy to own a VW
|
| posted on June 23rd, 2008 at 02:43 PM |
|
|
Blow through turbo on Dellorto carbs - who has done it?
Hi
Am wanting to hear from anyone who has run a blow through turbo on either single or dual carbs. (dual preferred)
I know that injection is better but I already have a set of NOS 45 DRLA's in the cupboard with a matching rising rate Malpassi fuel regulator and
linkages.
Ideally I would want to do a hideaway turbo style setup.
Appreciate any firsthand knowledge.
cheers
Marcus
|
|
|
westi
Custom Title Time!
what the
Posts: 1610
Threads: 28
Registered: August 30th, 2005
Member Is Offline
Location: milperra
Theme: UltimaBB Pro Blue
Mood: not blue, pink
|
| posted on June 25th, 2008 at 01:57 PM |
|
|
you will proberly get no response as everyone goes injection.
even though your carbies are new,you will still have to pull them apart to put seals in them,get them ready for boost.
jetting will have to be done on a dyno or buy a carby guru.
you will have to purchase new emulsion tubes as the aspo ones are no good.
other than that it's pretty simple.
proberly through a electronic dizzy to get a good spark.
i look forward to seeing progress
down sharon.
 |
|
|
vassy66T1
A.k.a.: Marcus Vass
Veteran Volks Folk
Wow ... are U reading this?
Posts: 2120
Threads: 76
Registered: June 4th, 2003
Member Is Offline
Location: Brisvegas
Theme: UltimaBB Streamlined2
Mood: Happy to own a VW
|
| posted on June 26th, 2008 at 05:46 PM |
|
|
Cheers Westi
Yeh, I haven't heard of too many going down the track but thought I would ask anyhow. My brother in law(mechanic) and his friends have some fairly
good experience with engineering turbos and carbs so I don't have to just poke around in the dark. Should be fun though...
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on June 26th, 2008 at 10:04 PM |
|
|
simplest is to go ford laser tx3 (?) blo thru carb like this. a few people have successfully run these before ( Dave Becker "menangler" on AVD). and
they are designed for that application with small cc's too....occasionally they pop up for sale on ebay, i have seen some sold here before.
"iswinkles" ran blo thru a long while back if you search his posts........main problem was keeping the fuel inside the carbs under boost, from
memory..........need special emulsion tubes, rubber top seal, bigger needles and seats, modulator rings, rising rate fuel regulator and a magic wand
to get jetting correct!.......lock your timing advance to 26'
buy yourself a copy of "turbomania", a VW turbo charging guide book by Bob Tomlinson, greta advice in there on loads of other secrets too
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
trickysimon
A.k.a.: Simon Azzopardi
Custom Title Time!
100km/h is only 9 seconds away
Posts: 1473
Threads: 43
Registered: December 15th, 2007
Member Is Offline
Location: Wagga Wagga
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 27th, 2008 at 06:08 PM |
|
|
| Quote: |
"iswinkles" ran blo thru a long while back if you search his posts....
|
2443TT on AVD, iswinkels is his account on shoptalkforums.
Simon
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 27th, 2008 at 07:58 PM |
|
|
Marcus plenty of ppl on shoptalkforums in the forced induction section have run single and twin blow thro DRLAs
i ran a carb off a whitelighting turbo KA laser
there a solex almost identical the standard bug one
might be what ur thinking of daimo?
TX3 were all EFI afaik
the same carb that renault GT uses
there getting harder to get hold of now
i got mine off ebay
that was a weber DMTT on Dave Beckers setup
not sure what factory setups had them but they super hard to find these days
|
|
|
punchbuggyracer
A.k.a.: Rob Tratt
Seriously Crusin Dubber
Posts: 152
Threads: 22
Registered: April 30th, 2006
Member Is Offline
Location: ANNERLEY, QLD
Theme: UltimaBB Pro Black
Mood: Above average!
|
| posted on June 27th, 2008 at 11:37 PM |
|
|
Get the Turbo Mania book from CB Performance. They reckon the dellortos are the ticket because there is room to machine them to fit seals on the
shafts. They have all the special turbo emulsion tubes and carby hats that you need.
Read the book its great info.
Those turbo carbs are off the really early square lazers, I dont know what model they are called.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 29th, 2008 at 10:31 AM |
|
|
| Quote: | Originally
posted by DUB74L
i ran a carb off a whitelighting turbo KA laser
|
oh yea x2 on turbomania
|
|
|
vassy66T1
A.k.a.: Marcus Vass
Veteran Volks Folk
Wow ... are U reading this?
Posts: 2120
Threads: 76
Registered: June 4th, 2003
Member Is Offline
Location: Brisvegas
Theme: UltimaBB Streamlined2
Mood: Happy to own a VW
|
| posted on June 29th, 2008 at 08:51 PM |
|
|
Cheers again...
I will get myself a copy of the the Turbomania and thanks for the heads up on that.
I had heard/read that the Dellortos were well suited to the purpose. Picked up a T04 (from Bugy Brads yard sale) so will see if this can be made ot
work.
Will post things up as I get it going.
Marcus
|
|
|
