| [ Total Views: 1864 | Total Replies: 36 | Thread Id: 747 ] |
| Pages: 1 2 |
|
|
 blk56
Officially Full-On Dubber
Posts: 217
Threads: 51
Registered: August 31st, 2002
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
 posted on September 22nd, 2002 at 05:41 PM |
|
|
gearbox oil
I have just got my split case gearbox ready to put back onto the pan and would like to know would it be ok to refill it with full synthetic oil or
should I stick to mineral oil
Thanks
|
|
|
56astro
Custom Title Time!
Posts: 1772
Threads: 74
Registered: August 25th, 2002
Member Is Offline
Location: The Nambucca
Theme: UltimaBB Pro Blue ( Default )
Mood: Pobjoy Powered with twin ignition & soon to be EFI'd
|
| posted on September 22nd, 2002 at 09:04 PM |
|
|
There was an interesting thread on the last forum about this subject.
Stay tuned!
VW car, VW engine ...... keepin it "real"
35MPG on 101.3kPa |
|
|
555bug
Custom Title Time!
WRX Bug Boy
Posts: 1123
Threads: 79
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Vintage
Mood: turbo charged
|
| posted on September 22nd, 2002 at 10:33 PM |
|
|
I think that newer oils are actually quite bad for VW gearboxs as they attack the brass components within...do a search on shoptalk forums for the
rundown. |
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on September 23rd, 2002 at 08:16 AM |
|
|
Some EP (extreme pressure) additives attack certain brass alloy's in vw boxes. Be careful what oil you use, it's hard to know what's in
them.
I find the safest option is to get an old oil bottle, clean it out real good. Then take it to a vw gearbox specialist who has been building vw
gearboxes for years and get them to fill your empty container for you. They won't charge much cos they buy it in bulk, and what ever they buy has
a good proven track record in vw boxes.
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on September 23rd, 2002 at 08:28 AM |
|
|
Just use the standard oil 90 grade.
|
|
|
Che Castro
Custom Title Time!
ankle straps
Posts: 1945
Threads: 79
Registered: August 25th, 2002
Member Is Offline
Location: Sydney, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: (( }:-{D]
|
| posted on September 23rd, 2002 at 03:43 PM |
|
|
yeah don't use GL5 rated gear oils in post 58 trannys as it is corrosive to the syncros, look for GL4 and make sure u use a hypoid oil.
Jon
|
|
|
11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline
Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n
|
| posted on September 23rd, 2002 at 06:50 PM |
|
|
Fuchs is the supplier to VW in Germany and we use Fuchs 75W90 gear oil
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
|
|
|
blk56
Officially Full-On Dubber
Posts: 217
Threads: 51
Registered: August 31st, 2002
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 23rd, 2002 at 07:42 PM |
|
|
Thanks for the info so far but it is still a bit confusing
|
|
|
Bugdriver
Casual Dubber
Posts: 27
Threads: 0
Registered: September 3rd, 2002
Member Is Offline
Location: Woy Woy NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Indigo
|
| posted on September 23rd, 2002 at 08:04 PM |
|
|
OK. As I understand it: The most common available oil is GL5 which is supposedly bad for VW gearboxes due to additives attacking brass/bronze alloys
of the synchromesh. The older GL4 dosen't have these additives and is OK. Look in Repco, that's where I located GL4 stuff, Kmart etc. has
only GL5 so just shop around it's out there......
|
|
|
Che Castro
Custom Title Time!
ankle straps
Posts: 1945
Threads: 79
Registered: August 25th, 2002
Member Is Offline
Location: Sydney, Australia
Theme: UltimaBB Pro Blue ( Default )
Mood: (( }:-{D]
|
| posted on September 24th, 2002 at 01:11 AM |
|
|
yeah i have been having a hard time finding a GL4 rated Hypoid oil
Jon
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on September 24th, 2002 at 08:38 AM |
|
|
I posted this yesterday but it disappeared. The type 1 gearboxes are straight ring and pinion style gears. Only the type 2 gearboxes are hypoid. So
you only need the hypoid oil in the type 2 trans.
Hypoid oil is different to normal oil because the hypoid gears experience higher contact pressures and therefore need extreme pressure additives. But
as I said before most EP additives eat the brass/bronze bits in the gearbox. So it is tricky to find an oil that will work as it is hard to tell from
reading a bottle. That's why I take the approach of finding a proven oil and using it.
Also, don't get sucked into oil additive hype they have at car shows. Like the one where a guy pushes a metal bar on a spinning metal wheel. With
normal oil it smokes, with the additive it doesn't. The test is an extreme pressure test, and the additive is an EP additive. Don't put EP
additives into your engine. Your engine is designed not to have any extreme pressures. And your engine has more brass/bronze bits than your gearbox so
you can imagine what happens.
|
|
|
mnsKmobi
Wolfsburg Wizard
Posts: 589
Threads: 27
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 24th, 2002 at 12:52 PM |
|
|
Penrite Hypoid oil is GL 5 and copper alloy friendly.:thumb
|
|
|
Grey 57
A.k.a.: Dean
Son of Jim - Creator of Good
Old Grey Cruiser
Posts: 2937
Threads: 355
Registered: August 25th, 2002
Member Is Offline
Location: Phillip Island
Theme: UltimaBB Pro Blue ( Default )
Mood: (OoVoO) (OVO).
|
| posted on September 24th, 2002 at 01:02 PM |
|
|
Oil Additives - Moreys
What about Moreys oil additive.? I have used it in both the engine and gearbox of the 57 for about a year now. Has this one got the bronze / brass
eating additives? :o
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on September 24th, 2002 at 02:33 PM |
|
|
I dunno but I wouldn't use them. My tribology lecturer at Uni told us about the EP additives in those things being crap and wrecking engines.
He said how can a company sell an oil additive and say what effect it will have without knowing what chemicals are in the original oil. Made sense to
me.
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on August 18th, 2003 at 02:11 PM |
|
|
This is a pretty opld post... but i think it should be resurfaced... I'm kinda scared now coz i put in some Nulon gearbox additive into my split
case... shold i drain the lot and fush it out a bit then use that GL4 oil?
...and Robert's ya father's brother...
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on August 18th, 2003 at 02:12 PM |
|
|
This is a pretty opld post... but i think it should be resurfaced... I'm kinda scared now coz i put in some Nulon gearbox additive into my split
case... shold i drain the lot and flush it out a bit then use that GL4 oil? What brands would one use that won't corrode the brass etc?
...and Robert's ya father's brother...
|
|
|
Grey 57
A.k.a.: Dean
Son of Jim - Creator of Good
Old Grey Cruiser
Posts: 2937
Threads: 355
Registered: August 25th, 2002
Member Is Offline
Location: Phillip Island
Theme: UltimaBB Pro Blue ( Default )
Mood: (OoVoO) (OVO).
|
| posted on August 18th, 2003 at 09:16 PM |
|
|
What not from the Quickie Mart Ned???
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on August 19th, 2003 at 10:35 AM |
|
|
I think i'd prefer to use dead dino than bandanas....
anyone who prefers to use oil in their gearboxes too? what types are you running and have you heard anything about the corrosive effects of aditives?
(both in the oil and aftermarket ones like Nulon and STP etc?)
...and Robert's ya father's brother...
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on August 19th, 2003 at 03:57 PM |
|
|
Oval TOFU,
I have been using NULON in all My Vehicles for many years without any problems...
Castrol VMX transmission oils are GL4. in different grades.
I remember reading somewhere that the gearbox oils used in VWs WAS detrimental to Brass bushes etc - But it only attacked the brass if the gearbox was
sitting for a long time.... and it was recommended to store VWs with NO oil in the Transaxle....
All additive manufactures say that the additives won't damage anything.... some don't do anything either... NULON seems to be good IMHO....
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on August 19th, 2003 at 04:10 PM |
|
|
VW transaxle
Doesn't the VW gearbox need a Hypoid oil as the Differential is included in the VW transaxle...
My Haynes manual says to use either :
GL5 SAE 75w-90 or 80w-90 Hypoid gear oil..
I did use GL5 75-85 in My VW Transaxle.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
KruizinKombi
A.k.a.: Col
Bishop of Volkswagenism
Seriously Obsessed Cyber Dubber
Posts: 3493
Threads: 104
Registered: August 25th, 2002
Member Is Offline
Location: Gippsland, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: Indifferent
|
| posted on August 21st, 2003 at 05:47 PM |
|
|
I have no idea what type of oil is in my gearbox, but I think it might be the same stuff it came from the factory with! :o
I'm not that worried about it, the manual says it doesn't require changing unless doing a gearbox overhaul, which it doesn't need. 
Kruizin Kol
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on August 22nd, 2003 at 12:53 PM |
|
|
I used Slick-50 in my past 1600 TP engine with no ill effects. But I believe that ordinary oil works fine... additives are just a additional cost.....
better off spending that money on a slab or two!
:beerX48
...and Robert's ya father's brother...
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on August 22nd, 2003 at 08:47 PM |
|
|
Castrol Magnatech engine oil - NULON
Well, I have been using NULON in all My engines and gearboxes etc for many years. I have just stopped using NULON in My engines and now use Castrol
Magnatech engine oil instead. It stops wear with out adding any additives...
Lee
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
toplessbug
Fahrvergnugen
Posts: 879
Threads: 128
Registered: August 27th, 2002
Member Is Offline
Location: Brisvegas QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: waiting for my lotto win
|
| posted on August 24th, 2003 at 06:29 PM |
|
|
additives
just throwing in my 2 bobs worth but i have dodgy syncros etc in the 71 and i did and oil change refilled with 75 weight and used good old fashioned
molybond in it and 1 year later its still a lot better than when i first looked at it and moly is compatible with oil and brass unlike the teflon
based products |
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on August 26th, 2003 at 12:13 PM |
|
|
the diff isnt helical cut ie. hypoid, but the actual gears are aren't they? So wouldn't that require a hypoid oil? I'm using the run of
the mill Mobil 80W-90 stuff from KFart and thats GL5....
**STOP PRESS**
I just rung Mobil on their help line and they had a listing for the VW trannys and they say that it the crap from KFart is too think and the EP
'could' corrode the brass/bronze alloys. I think that 'could' is pretty much a "yes" but they're just not allowed
to say it outright....
He suggested another Mobil product call Mobil-lube GX-A 80W (GL4) [only comes in 20L!] or Mobile-Fluid 424. This is actually Ford's power
steering fluid but is also used in 4X4's box's etc
so...USE GL4 RATED OIL AROUND THE 80W MARK.
I'm gonna use Penrite 80-85W and they state on the back that it doesn't corrode anything.... live and learn....and yo wonder why your
syncro's in 2nd seem to always be dead....
| Quote: | Originally
posted by 68AutoBug
Doesn't the VW gearbox need a Hypoid oil as the Differential is included in the VW transaxle...
My Haynes manual says to use either :
GL5 SAE 75w-90 or 80w-90 Hypoid gear oil..
I did use GL5 75-85 in My VW Transaxle.
|
[Edited on 26-8-2003 by oval TOFU]
...and Robert's ya father's brother...
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on August 26th, 2003 at 12:46 PM |
|
|
The type 1 diff is a spiral-bevel gear-set. This means they are 90 degrees to each other, and the teeth are a spiral shape and not straight. The angle
lets the load transfer from tooth pairs more smoothly and more quietly without backlash problems.
All forward gears are helical gears. The teeth are angled. Same load sharing as before.
Reverse gear is a straight cut gear. The teeth are straight across the gear. This makes the gear very weak as only 1 pair of teeth take the load at
any one time. The transfer of load is also not smooth between teeth pairs, and makes the gearset whine. The advantage of a straight cut gear is
it's very efficient. Helical gears produce a side thrust load which is a waste of power. That's why motorcycles and race-cars use straight
cut gears.
A hypoid differential (used in type 2 gearboxes) is a spiral bevel gearset with the axis of the pinion and the axis of the ring gear offset from each
other. This can make them even less efficient than a spiral-bevel, but not necessarily.
Luckily the vw engine and trans don't really care what additives you put in your oil. But later hi-tech motors will definitely not like teflon
additives, as the teflon blocks the hydraulic lash adjusters (HLA). I wouldn't use additives.
Synthetic oils tend to be thinner and leak a lot easier. Stick with a mineral for the VW, it won't run any different with a synthetic, it will
just leak easier.
MY V6 is a different animal. I ran my favorite mineral oil (as per workshop manual), and the HLA's were quite noisy. After speaking to MX6 forum
guys, I found the V6 needs synthetic oil. So now I run Castrol R Synthetic 5-30W and it's very quiet.
Modern oils are designed to suit the demand of modern engines. The VW engine is ancient, and will run just as happily on ancient mineral oil.
I also spoke to Leon from Leons Motors. He has been building VW gearboxes for over 17yrs, so I asked him about the gearbox oils. He said he has never
seen any evidence of any oil eating the brass/bronze bits in a gearbox.
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on August 26th, 2003 at 01:03 PM |
|
|
So i can stick with the GL5 stuff? I respect your info and posts coz i know you're a chemical engineer or something the making... would 80W-90 be
too thick? I dont think it would make that much of a difference in the tranny..
So what shoul di believe? GL5? GL4?
:puke
...and Robert's ya father's brother...
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on August 26th, 2003 at 05:24 PM |
|
|
chemical engineer, nooooo!
Mechanical Engineer :thumb
I use GL5 stuff made for transaxles. It says on it, transaxle oil.
You won't get much variety in weight. I would have to check what I put in last.
Leon said he uses light weight synthetic gearbox oil in his trike, and even uses some slippery additives. But I think it costs him about $70 at oil
change time. He said it gives good cold gear changes and good HP on the dyno, but it is expensive. He said the normal thicker oil seems fine if you
don't want the expense of the synthetic, it just usually gives slightly notchy shifts when cold.
I don't mind the notchy shifts when cold, you should drive nice when it's cold anyway.
|
|
|
oval TOFU
Son of Jim - Creator of Good
Bitte, ein Bit!
Posts: 2946
Threads: 234
Registered: July 10th, 2003
Member Is Offline
Location: Pt Cookie, Melburg
Theme: UltimaBB Pro Grey
Mood: :booM
|
| posted on September 14th, 2003 at 11:47 PM |
|
|
I'm intending to use some Penrite GL-4 80W-85 gear oil in my split tranny... the manual states i should use 90W in temps above freezing.... is
this viscosity difference of '5' gonna be detrimental? Especialy seeing that summer is coming up? Or am i being pedantic coz the book is
from the mid 60's and they were still bitching about using HD oils in the engine when all engine oils are pretty much HD now.... same goes for GB
oils?
Cheers
tofe
[Edited on 14-9-2003 by oval TOFU]
...and Robert's ya father's brother...
|
|
|
Andy
Son of Jim - Creator of Good
Andy's Adventures
Posts: 2819
Threads: 181
Registered: November 5th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy Man
|
| posted on September 15th, 2003 at 09:25 AM |
|
|
Hmmm...... I hate stepping into oil threads, but here goes.
This info is related to 1.8L and 2L Kombi GB’s, and pretty sure most ‘70’s beetle GB’s. Not sure about older ones?
VW specified GL4 rated oil as that is what was available in the ‘70’s, as Wes say’s they are still fine to use. In the mid ‘80’s GL5 oils
were introduced with new additives included. (Won’t bother with specifics). Some of these additives attacked brass and eroded them, which meant it
attacked the syncromesh rings. When I questioned Shell these additives were removed by the ‘90’s (have heard it elsewhere also) from their
oils.
So according to Shell technical, they still recommend using GL4 oil (because the book does) but their GL5 oils are fine to use. GL4 oil is also
getting hard to track down. I don’t recommend one brand over another, it’s just what I use, and most brands will be equivalent, made to the same
specs. (Please check for yourself)
As for synthetic or mineral oil, again both are fine to use. In general synthetics will last longer (don’t break down as easy) and are more stable
at high temperatures than mineral oil (not a problem in VW GB’s). The comments on easier shifting is because of the ‘weight’ of the oil. With
synthetics a wider range of weight is possible over mineral oils. VW recommend 80W90 oil for the GB (normal gear oil) Straight weights are not easily
sourced these days anyway. With a synthetic the same gear oil is 75W90, which means it’s ‘thinner’ when it’s cold as Wes said which means
changing is slightly easier when cold (more noticeable down south in winter than here in Brissy).
So the choice is yours!!
Andy:thumb
|
|
|
| Pages: 1 2 |
.JPG "Avatar")
