| [ Total Views: 1427 | Total Replies: 7 | Thread Id: 74923 ] |
|
|
 type3lover
A.k.a.: The Smashed Repairer
Insano Dub Head
in the garage...
Posts: 796
Threads: 90
Registered: February 2nd, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: stoked
|
| posted on February 23rd, 2009 at 06:08 PM |
|
|
advice needed to change 2 point to 3 point front seat belts
Hey all!
As the topic says I want to upgrade to 3 point retractable belts in my early type 3.
Just wondering if anyone has done it, any advice on legalities etc. Obviously it will need to be engineer certified.
Maybe there is someone in Sydney that u might recommend?
Does the top mounting point on the pillar need to be modified? Or is it just a matter of welding / bolting the lower mount in the right place?
I have a set of bolt on brackets possibly from a later vw and a set of vgc belts already.
TIA, T 
PS I assume it would be better to do the conversion b4 the carpets and sound deadening go in?
.
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 23rd, 2009 at 07:24 PM |
|
|
the top mount will be Ok
but you had better get the engineer to look at the weld on the lower mount and assy
when bolted up to the car
I have done similar but never engineered only to my own standards
|
|
|
type3lover
A.k.a.: The Smashed Repairer
Insano Dub Head
in the garage...
Posts: 796
Threads: 90
Registered: February 2nd, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: stoked
|
| posted on February 23rd, 2009 at 07:28 PM |
|
|
Hi Dave. Did you weld or bolt the bracket on and where to? What is the strongest point and is there any need to do any reinforcing?
Do you think yours would pass an inspection by an unbiased authority? 
Love your EFI conversion too...I have also done one.
Thanks mate.
.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on February 23rd, 2009 at 07:36 PM |
|
|
See an RTA certified engineer and ask his advise as he will be the one to do the certification.It is quite interesting the difference in load thrown
onto the top mount when it is converted from 2 or 3 point to inertia reel. Cheers Les
|
|
|
type3lover
A.k.a.: The Smashed Repairer
Insano Dub Head
in the garage...
Posts: 796
Threads: 90
Registered: February 2nd, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: stoked
|
| posted on February 23rd, 2009 at 07:52 PM |
|
|
Thanks Les. Are you suggesting that the top mount should be reinforced? I have seen it done so am unsure.
Any engineer in Syd with VW experience that could be recommended?
.
|
|
|
pod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline
Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better
|
| posted on February 23rd, 2009 at 09:02 PM |
|
|
find a seatbelt installer ,as they can certify it as well...
usually baby restraint fitting stations
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 24th, 2009 at 05:57 AM |
|
|
the retractable belts i had were out of a holden from memory and they needed to be in the upright position to make them work so you will have to
keep that in mind
I made a bracket and welded it to the body work then reinforced it also plat in the pillar with hidden nuts on them for the top mount point I did
this in my Oval
I dont like the retractable anymore as when yr driving along and bouncing in the seat the belts tend to tighten up on you pulling you way into the
seat
I prefer 3 pont stock belts although they get in the way when getting in n out of the car
yep fuel injection is good
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on February 24th, 2009 at 10:51 AM |
|
|
No I am just saying that loads are moved to different points when things are altered. There are quite a few RTA certified engineers in Sydney area
This list should be available on MYRTA site.
|
|
|
