Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Offroad V-Dubs Navigation Symbol Should body lift kits be welded to the pan? Go To Bottom

Printable Version  
[ Total Views: 1739 | Total Replies: 2 | Thread Id: 77185 ]
« View Previous Thread View Next Thread »
Author: Subject:  Should body lift kits be welded to the pan?
Memberbajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
********

Avatar


Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline

Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!

posted on June 13th, 2009 at 10:25 PM
Should body lift kits be welded to the pan?

I bought my body lift kit 2nd hand, and it was just bolted on.

But i see some going around with teh kits completely welded to the chassis.

any particular benefits either way? any need?
Would the blue plate compliance officer have a spew if i welded it?

I"m really too lazy and don't want to.... but if i should, i wouldn't question it.



(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. :tu:
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
MemberBaja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
******

Avatar


Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content

posted on June 13th, 2009 at 11:58 PM



It doesn't matter. Mine is not welded, uses a stock body to floor pan kit above and below the lift kit.



Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... :)
www.taylorcycles.com.au - My DH MTB racing brothers shop.
Memberbajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
********

Avatar


Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline

Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!

posted on June 14th, 2009 at 09:03 AM



i assume the kit being the rubber seal do daddle?

Thanks Wes. that cures my doubts... cause if i end up ruining the chassis some how i wouldn't wanna have to dispose of a welded on lift kit too... They aren't cheap :tu:



(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. :tu:
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!


 Aussieveedubbers Navigation Symbol Offroad V-Dubs Navigation Symbol Should body lift kits be welded to the pan?   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 14.3% - SQL: 85.7% ]