| [ Total Views: 1428 | Total Replies: 9 | Thread Id: 87837 ] |
|
|
 BlueV2
A.k.a.: Mark
Seriously Crusin Dubber
Posts: 193
Threads: 15
Registered: April 22nd, 2008
Member Is Offline
Location: Blacktown - Sydney
Theme: UltimaBB Pro Blue
|
| posted on December 29th, 2010 at 11:27 AM |
|
|
EJ25 idles at 2500rpm - Solved
I have just put the motor back in the buggy behind the new Subaru gearbox. It has been 4 months since this thing has run, and now the idle is at least
2500rpm.....goes to 3000rpm when it warms up!!.
Moving the ICV makes no difference. I dont have any ECU error codes to say that I haven't connected anything up.
When I disconnect the cable to the ICV, the idle drops right down, but it runs like a hairy goat.
What else should I look for ? or could it just be that the ICV is stuck ?
Cheers,
Mark
Sharpbuilt V2, EJ25, Subaru 5 Speed, Falcon rear discs, Heater & A/C, Rack Steering
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on December 29th, 2010 at 12:20 PM |
|
|
Assuming it's not something silly like and an air leak or your throttle is cracked open slightly (maybe cable not slack enough?) Check your TPS
reading if its not throwing a code
|
|
|
BlueV2
A.k.a.: Mark
Seriously Crusin Dubber
Posts: 193
Threads: 15
Registered: April 22nd, 2008
Member Is Offline
Location: Blacktown - Sydney
Theme: UltimaBB Pro Blue
|
| posted on December 29th, 2010 at 12:37 PM |
|
|
I checked the throttle cable, but it is fine. I doubt it is an air leak, but I will check. I only have the engine light to check error codes, I dont
have a scanner. Some idiot cut the scanner connector off the loom !!!.......
Sharpbuilt V2, EJ25, Subaru 5 Speed, Falcon rear discs, Heater & A/C, Rack Steering
|
|
|
BlueV2
A.k.a.: Mark
Seriously Crusin Dubber
Posts: 193
Threads: 15
Registered: April 22nd, 2008
Member Is Offline
Location: Blacktown - Sydney
Theme: UltimaBB Pro Blue
|
| posted on December 29th, 2010 at 07:50 PM |
|
|
I've solved it, but not entirely sure how :-).
I took the top off the ICV to make sure that the valve wasn't stuck. It didn't appear to be so, I put it all back together and it worked!!!
Sharpbuilt V2, EJ25, Subaru 5 Speed, Falcon rear discs, Heater & A/C, Rack Steering
|
|
|
Bugaru03
Commited Dubber
Posts: 70
Threads: 5
Registered: March 9th, 2008
Member Is Offline
Location: Athens, Greece
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 29th, 2010 at 10:07 PM |
|
|
ha ha ha, magic is always the finest solution!!!
|
|
|
ElusiveStranger
Officially Full-On Dubber
Posts: 330
Threads: 30
Registered: May 28th, 2006
Member Is Offline
Location: Kent. England
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 1st, 2011 at 11:41 AM |
|
|
| Quote: | Originally
posted by BlueV2
I've solved it, but not entirely sure how :-).
I took the top off the ICV to make sure that the valve wasn't stuck. It didn't appear to be so, I put it all back together and it worked!!!
|
Maybe you free'd up the carbon/oil deposits. Carb cleaner works a charm if it happens again
|
|
|
BlueV2
A.k.a.: Mark
Seriously Crusin Dubber
Posts: 193
Threads: 15
Registered: April 22nd, 2008
Member Is Offline
Location: Blacktown - Sydney
Theme: UltimaBB Pro Blue
|
| posted on January 1st, 2011 at 08:52 PM |
|
|
I actually have half a dozen cans of the Subaru "upper engine cleaner", I just cant find it after we moved house !!!
Once I track it down I will run another can through, but for now it seems to be working well.
Sharpbuilt V2, EJ25, Subaru 5 Speed, Falcon rear discs, Heater & A/C, Rack Steering
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on January 1st, 2011 at 09:22 PM |
|
|
First thing I did after getting our EJ22 running in the bus was to run a can of genuine Subaru engine cleaner thru. The black stuff that came out the
exhaust the first few times was quite impressive.
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on January 3rd, 2011 at 08:10 AM |
|
|
yeah, I have to do that. what do you disconnect to run it through?
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on January 3rd, 2011 at 09:24 AM |
|
|
canister purge on the TB
http://www.youtube.com/watch?v=H1Z_1Crz0IA
|
|
|
