| [ Total Views: 493 | Total Replies: 2 | Thread Id: 90892 ] |
|
|
 clyve
Officially Full-On Dubber
Posts: 310
Threads: 93
Registered: February 19th, 2011
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Blue ( Default )
Mood: painfully happy
|
| posted on June 6th, 2011 at 06:46 PM |
|
|
help
gday folks.... I have a 72 twin port 1600 beetle that has a new carby 34pic-3 and a 009 dizzy how do i set this up as there are no timming marks on
the pully...does the condenser have to go at the front...does the motor on TDC mean that the rotor arm has to be on or about 1
does it fire 1342 does the craby need tunning as it is straight out the box? does the 009 wire go to the -ve on the coil basicly give me you wisdome
to let the girl run again.cheers
|
|
|
VolksVair
Officially Full-On Dubber
Posts: 252
Threads: 32
Registered: April 6th, 2010
Member Is Offline
Location: Geelong VIC
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 6th, 2011 at 08:16 PM |
|
|
Mate, best you get a copy of "How to keep your vw alive for the complete idiot" its a great book, explains all you want to know and more, some
folks call it their bible. Timing is 1432 the timing mark is a small notch on a crank pulley, distributor wire goes to the negative
side of the coil, get the book cheers & good luck Frank
Adventure Before Dimentia
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on June 6th, 2011 at 11:37 PM |
|
|
| Quote: | Originally
posted by clyve
gday folks.... I have a 72 twin port 1600 beetle that has a new carby 34 pic-3 and a 009 dizzy how do i set this up as there are no timing marks on
the pulley...
does the condenser have to go at the front...does the motor on TDC mean that the rotor arm has to be on or about 1
does it fire 1342
does the carby need tuning as it is straight out the box?
does the 009 wire go to the -ve on the coil
basicly give me you wisdom to let the girl run again.
cheers
|
the timing order is 1432 for air cooled VWs...
there is a mark on the rim of the distributor [cap off] where the rotor should be pointing for number 1 cylinder...
and roughly at the timing mark at the top of the pulley..
the condensor goes on the back of the 009...
condensor to -- NEGATIVE on coil... + to power on coil..
there WILL be a timing mark or two on Your VW Pulley on the inner edge of the pulley...
1st one 7 1/2 degrees BTDC
2nd groove is TDC.. clockwise >
[alloy pulley with timing degrees is easier]
check out the technical articles on ; http://www.chircoestore.com/catalog/articles.php
also; http://www.vw-resource.com/ for lots of articles on everything about
BEETLES....
You need some workshop manuals for Your car...
Haynes... Gregorys [aussie] idiot book for the compleat idiot
is good for beginners - many of these books under the seat..
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
