Posts: 13
Threads: 6
Registered: October 21st, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on July 5th, 2011 at 08:27 PM
Frame head bolts
I need to know the size etc for the four bolts that bolt into the front fire wall on a 71 super. Also the size of the two bolts that bolt the
hammerhead to the body. I have looked at several websites and come up with different sizes.
Also have bolted the body to the pan with all the bolts except ones for front fire wall and the A pillars both sides appear to be sitting high (have
replaced heater channels and not welded A or B pillars yet. Bottom of doors on both sides align very nicely with heater channel, only room for seal.
Any ideas.
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
posted on July 6th, 2011 at 10:06 AM
Bulkhead should be m10x1.5 thread and 80mm long. Hope your captive plates in the channels are OK
