Posts: 84
Threads: 26
Registered: February 10th, 2011
Member Is Offline
Location: Kellyville NSW
Theme: UltimaBB Pro Blue ( Default )
posted on October 30th, 2011 at 10:06 AM
Which lead goes where ?
Hey guys, i am assembling my 1200cc 40hp engine back together (big distributor) and i am not sure which lead from the cap goes to what spark plug. If
you can explain to me where they go or post a picture that will be great. Thanks guys
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
posted on October 30th, 2011 at 03:37 PM
Hi
On the rim of the dizzy you will see a very faint mark like a thin shallow hacksaw cut, thats #1, the firing order is 1432 or 4321 backwards
Looking at the motor 1 is at the front of the car right side, # 3 is at the front of the car left side, # 2 is at the rear of the car right side and #
4 is at the rear of the left side
^3 1
4 2
Steve
vwbugsrule
Slammed & Awesome Dubber
Posts: 84
Threads: 26
Registered: February 10th, 2011
Member Is Offline
Location: Kellyville NSW
Theme: UltimaBB Pro Blue ( Default )
posted on October 30th, 2011 at 07:33 PM
Ok so Cylinder #1 is sorted out i know that one. On the cap, the lead beneath cylinder 1, that would go to cylinder #4, then accross from that (on the
left bottom of the cap) cyldiner #3 then above that, cylinder #2 ? Am i right?
