| [ Total Views: 590 | Total Replies: 7 | Thread Id: 94415 ] |
|
|
 tweety
Wolfsburg Wizard
Posts: 460
Threads: 68
Registered: February 26th, 2011
Member Is Offline
Location: Strathbogie Vic
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 20th, 2011 at 10:22 PM |
|
|
Leaking oil from CV area
My trike IRS, left hand side has been throwing grease or oil from the CV area and it lands on the new exhaust system. Had a mechanic look at it and he
unscrewed the 6 or so allen key bolts of a plate and lined the bolts with silicone.
The problem persists. any ideas? and a solution? rubber boots seem fine and cant see any excess oil in that area- just a smear.
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on December 21st, 2011 at 05:40 AM |
|
|
if its oil then the output shaft seal has to be replaced
If its black moly grease then maybe the CV rubber boot has split and need replacing
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on December 21st, 2011 at 07:20 AM |
|
|
I often see inferior or too much grease to be the cause if no split in the boot is found.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on December 21st, 2011 at 11:24 AM |
|
|
| Quote: | Originally
posted by tweety
My trike IRS, left hand side has been throwing grease or oil from the CV area and it lands on the new exhaust system. Had a mechanic look at it and he
unscrewed the 6 or so allen key bolts of a plate and lined the bolts with silicone.
The problem persists. any ideas? and a solution? rubber boots seem fine and cant see any excess oil in that area- just a smear.
|
Hi
putting silicone on the bolts won't do anything...
there is a flat seal in the centre of the piece that the inner cv joint bolts to, that stops oil from the gearbox..
also an outer oil seal on the shaft coming from the gearbox..
was this outer seal lubricated when fitted..?
as they can wear down until the oil from the gearbox flows thru lubricating the seal... can seep oil there..
My Beetle throws moly grease from the inner CV Joints as I over filled them with grease.. ..!!
Lee
PS:
I presume You don't like the smell of burning oil or grease?
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on December 21st, 2011 at 11:38 AM |
|
|
| Quote: | Originally
posted by vw54
if its oil then the output shaft seal has to be replaced
If its black moly grease then maybe the CV rubber boot has split and need replacing
|
Hi Dave
there are two seals to stop oil from the gearbox... IRS
inner 113517289A and outer 113301189F
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
tweety
Wolfsburg Wizard
Posts: 460
Threads: 68
Registered: February 26th, 2011
Member Is Offline
Location: Strathbogie Vic
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 21st, 2011 at 02:58 PM |
|
|
thanks guys.
will get the boys at Volksplace on the 9th Jan to fix it...they are doing the bushes and wheel align.
Yeh, dont mind the smell of burning oil/grease but degreasing the muffler has to be done regularly.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on December 21st, 2011 at 05:30 PM |
|
|
| Quote: | Originally
posted by tweety
thanks guys.
will get the boys at Volksplace on the 9th Jan to fix it...they are doing the bushes and wheel align.
Yeh, dont mind the smell of burning oil/grease but degreasing the muffler has to be done regularly.
|
Hi
I have to degrease the chassis under the inner cv joints where the grease accumulates..
takes a long time for the grease to leak out
but then I don't do many klms... lol
grease must come out from between the metal ends on the cv joints.. no leaking boots...
Your trike must be the Best one I've ever seen....
excellent job....
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
tweety
Wolfsburg Wizard
Posts: 460
Threads: 68
Registered: February 26th, 2011
Member Is Offline
Location: Strathbogie Vic
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 22nd, 2011 at 02:25 PM |
|
|
Thanks Lee. Yeh, our pride and joy and much planning on the roof and ea81 conversion to get it to this stage. It's a camera magnet...and great to
ride.
When I fitted the ea81 I checked the transaxle oil and was full. Auto trans gasket replaced, filter clean and oil replace so I hoped for no oil
leaks. But we are talking about a 40-45 year old driveline and the seals condition unknown. Best to get them sorted while they have their heads
under it rebushing the suspension.
have a good xmas mate.
|
|
|
