| [ Total Views: 500 | Total Replies: 5 | Thread Id: 96176 ] |
|
|
 dubai
Seriously Crusin Dubber
Posts: 161
Threads: 67
Registered: October 15th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
 posted on April 2nd, 2012 at 05:02 PM |
|
|
Castor Shims
Hey, Have you ever used castor shims to correct issues in steering once you had lowered ur beetle? if so what was the details of the issue and what
noticable difference did using castor shims do for it?
Th anks
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on April 2nd, 2012 at 05:20 PM |
|
|
yes they correct the castor to what it should be
because of the lowering
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on April 2nd, 2012 at 05:28 PM |
|
|
They restore the king pin inclination angle and the self centering of the steering, you need to have a wheel alignmnet to determin weather you even
need them, if it is withinn specs and you fit a set all you will do is increase the effort required to turn the steering wheel at low speeds, vw used
to fit them at the dealers to stop the car wandering. if you have fitted dropped spindles the castor should be around factory specs, if you lowered it
using adjuster's then you will probably need to fit a set
|
|
|
Sides
A.k.a.: Dave Sidery
Veteran Volks Folk
Posts: 2220
Threads: 59
Registered: May 20th, 2007
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
Mood: Need... more... shed... time...
|
| posted on April 2nd, 2012 at 05:31 PM |
|
|
Main effect I know from reduced castor is that you lose some of the self centering effect in the steering... so the steering will try to wander a bit
when driving in a straight line, and can get a "tram lining" effect where front tyres want to follow grooves or cracks in the road.
Had it occur on Jezzi when first lowered her many moons ago (with adjusters), and once threw set of castor shims in it was much improved.
Only slight negative was that the girlfriend at the time drove the car occasionally, and she complained it made the steering a bit heavier... easily
fixed tho by keeping the castor shims and ditching the girlfriend !!!
VWDCQ vice pres & web dude - vwdcqinc.org.au
Join a car club - get car peeps
My toys
'70 Hillclimb Bug 'Jezebel' w/- Haltech EFI - http://bit.ly/VwTNtQ
'60 KG Coupe - resto kinda started
01 New Beetle - gf's car, but I turn the spanners |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on April 2nd, 2012 at 07:26 PM |
|
|
I fitted them when I lowered MY beetle but My Wife doesn't like to drive it because its heavy to steer at slow speeds..
as She is here to stay Dave,, ..
its not as low as it used to be...
I don't have any mud guard rubbing issues now..
and I have 20psi in front tyres.. bald tyres would make it easier..lol
How LOW does the front need to be before they are fitted??
1 1/2 inches -- 2 inches??
I may take them out and see if I can see or feel any difference..
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on April 6th, 2012 at 11:15 PM |
|
|
you only need the shims if you end up with a nose down stance over a certain amount. These shims can quite easily put the castor past what it should
be on mildly nose down bugs
madness is in the eye of the beholder  |
|
|
