| [ Total Views: 4967 | Total Replies: 18 | Thread Id: 96315 ] |
|
|
 Vanders
Seriously Crusin Dubber
Posts: 125
Threads: 28
Registered: November 13th, 2006
Member Is Offline
Location: Launceston, TAS
Theme: UltimaBB Pro Grey
|
| posted on April 9th, 2012 at 08:00 PM |
|
|
The Marauder
I've been keeping this under my hat for so long I thought I would burst, but it has finally hapenned so I can post some info up. I have just taken
posession of a fibreglass body mould for a replacement body for a Type 3 called the Marauder.
The Marauder is a body shape based on a Ferrari Dino, and is made to bolt to a Type 3 floorpan. They were commercially made a decade or two ago in
Adelaide before the company wound up and the moulds were stored. I stumbled across the owner of the mould last year and ordered a body from the mould,
but it couldn't be fulfilled and I was offerred the mould instead. Over Easter we went and picked it up and bought it home, and I'm super impressed
by both the quality and the design.
I won't go into it too much now as I'll build a proper website about it and the build I'm embarking on, but here are some photos of the mould, the
last body produced from the mould, and an article from a kit car magazine that gives some details.
|
|
|
type3disease
Custom Title Time!
Posts: 1242
Threads: 104
Registered: March 5th, 2007
Member Is Offline
Location: Melb. VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Average
|
| posted on April 9th, 2012 at 08:43 PM |
|
|
| Quote: | very cool.... can
you make me one...?
here's another recently 'discovered' in country victoria
[quote=]Introducing the Marauder 8)
.
|
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on April 10th, 2012 at 09:45 AM |
|
|
hmmm? interesting
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
PHAT BUG
Custom Title Time!
Dave says Bini's a fool
Posts: 1698
Threads: 192
Registered: May 22nd, 2003
Member Is Offline
Location: Bendigo Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Drippin
|
| posted on April 10th, 2012 at 10:43 AM |
|
|
So you got the mould from Murray Bridge High Scool??
|
|
|
Vanders
Seriously Crusin Dubber
Posts: 125
Threads: 28
Registered: November 13th, 2006
Member Is Offline
Location: Launceston, TAS
Theme: UltimaBB Pro Grey
|
| posted on April 10th, 2012 at 02:48 PM |
|
|
Yep. The school was no longer running the composites programme so the owner of the mould had to move it and he didn't have any room.
|
|
|
PHAT BUG
Custom Title Time!
Dave says Bini's a fool
Posts: 1698
Threads: 192
Registered: May 22nd, 2003
Member Is Offline
Location: Bendigo Vic
Theme: UltimaBB Pro Blue ( Default )
Mood: Drippin
|
| posted on April 12th, 2012 at 02:16 PM |
|
|
Thats awesome!
The blue one above was one of two prototypes built by Dennis Bedford and they were simply called a DRB. He and a mate built 1 each.
When he relocated to QLD the moulds were sold off, changed a little and they were then known as a Maruader.
I really love the shape. One of the nicest kit cars around.
|
|
|
Vanders
Seriously Crusin Dubber
Posts: 125
Threads: 28
Registered: November 13th, 2006
Member Is Offline
Location: Launceston, TAS
Theme: UltimaBB Pro Grey
|
| posted on April 12th, 2012 at 03:59 PM |
|
|
I think most of the changes were in the tail. In the photos of the mould you can see an extra panel sitting on top of the frame. Apparantly they
changed to rear panels to give a rounder shape to the rear without the mini-fins that you can see in the blue car. The extra panel is the old shape,
and comes with a few extras for the fins.
It's going to be a lot of work, but having the moulds means we can start with a new body that hasn't been hacked or repaired.
|
|
|
Vanders
Seriously Crusin Dubber
Posts: 125
Threads: 28
Registered: November 13th, 2006
Member Is Offline
Location: Launceston, TAS
Theme: UltimaBB Pro Grey
|
| posted on April 13th, 2012 at 05:33 PM |
|
|
If anyone hs any information on the history of the Marauder then I'd be really keen to hear it. I'm going to put together a website about it, and my
build project.
|
|
|
snitz
Wolfsburg Wizard
Posts: 605
Threads: 37
Registered: September 28th, 2008
Member Is Offline
Location: Adelaide.. the defect and taser state..
Theme: UltimaBB Psyche Red
Mood: "Bug"gered
|
| posted on April 13th, 2012 at 05:48 PM |
|
|
With some race style bolt on fender flares and deep dish BBS wheels..these would be a really nice looking kit car..
But I'd pity the poor person covered in fibreglass chop/mat and resin rolling out every layer unless you spray in all the chop..
|
|
|
Vanders
Seriously Crusin Dubber
Posts: 125
Threads: 28
Registered: November 13th, 2006
Member Is Offline
Location: Launceston, TAS
Theme: UltimaBB Pro Grey
|
| posted on April 13th, 2012 at 09:14 PM |
|
|
Didn't say I was doing the glassing myself. 
|
|
|
whathaveidone
Custom Title Time!
Posts: 1559
Threads: 98
Registered: February 24th, 2010
Member Is Offline
Location: Dapto
Theme: UltimaBB Pro Blue ( Default )
Mood: Heading for 10.99
|
| posted on April 15th, 2012 at 05:13 PM |
|
|
Found this one on ebay today
http://www.ebay.com.au/itm/Ferrari-Dino-simlar-Race-Kit-Car-VW-Project-Not-La...
|
|
|
Vanders
Seriously Crusin Dubber
Posts: 125
Threads: 28
Registered: November 13th, 2006
Member Is Offline
Location: Launceston, TAS
Theme: UltimaBB Pro Grey
|
| posted on April 22nd, 2012 at 05:48 PM |
|
|
The car on ebay went for $2500 with one bid. I think it was a bargain.
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on June 8th, 2012 at 10:30 PM |
|
|
Welcome, brother! I've met Denis on a couple of occasions after buying my Sabre MK2 about 6 years back. DRB did manufacture the Marauder in QLD in
very small numbers (5 or 6) before they sold the molds. I have a fair whack of info and design drawings/MPV approval papers from a couple of DRB
cars. Denis now runs copycatcars.com (Yes, he is still at it!).
If I recall, there is an AVD'er with an unfinished, one-off factory Sabre MK2 T-top down in Tassie.
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on June 8th, 2012 at 10:35 PM |
|
|
Mine
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
| posted on June 8th, 2012 at 10:44 PM |
|
|
| Quote: | Originally
posted by sinecure
Mine
|
Nice, details please
|
|
|
sinecure
A.k.a.: Sin
Custom Title Time!
Want another... :(
Posts: 1031
Threads: 76
Registered: March 30th, 2006
Member Is Offline
Location: Lat 27 S, Long 153 E
Theme: UltimaBB Psyche Blue
Mood: Low, slow and SAD to see it go.
|
| posted on June 9th, 2012 at 10:06 AM |
|
|
Thanks DRB Sabre MK2, glass body with integrated full steel spaceframe,
widened Type3 chassis, Subaru EA81.
A POSSE AD ESSE.
I live in my own little world, but it's okay, they know me here.
|
|
|
Hahndorfautohaus
Learner Dubber
Posts: 1
Threads: 0
Registered: December 21st, 2019
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 21st, 2019 at 12:36 PM |
|
|
Very keen to hear what info you have on the DRB Sabre, I have a MK1 in Adelaide and am looking for a bit of info one it, as I am new to the forum it
wont let me send you a PM |
|
|
