Board Logo
Go To Bottom

Printable Version  
[ Total Views: 560 | Total Replies: 4 | Thread Id: 97738 ]
Author: Subject:  Oil Pressure ???
Membertin-bits
Casual Dubber
*


Avatar


Posts: 45
Threads: 14
Registered: September 23rd, 2009
Member Is Offline

Location: Morayfield Qld
Theme: UltimaBB Pro Blue ( Default )

posted on July 8th, 2012 at 05:16 PM
Oil Pressure ???


I know this is a how long is a piece of string question but here goes.

What would be normal oil pressure expected in the following setup.

New build 1835 twin 40 webbers scat C35 cam running full flow external filter and cooler and motor is now holding approx 4.5 ltrs of oil

Cold startup 29 psi
Warn idle 14.5 psi
Hot idle 11 psi

Cheers Ian
Memberh
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
*********


Avatar


Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline

Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me

posted on July 8th, 2012 at 05:19 PM



hmmm
If it takes a week to walk a fortnight
how long is a piece of string..
indeed ??

mate..
how about you put your data up here n peeps in the know may be able to give you some ideas?




fractal geometry; the inner most limits of mind altering abuse

Fantasy http://seventhchronicle.com 

Z = Z2 + C1/r = 1/0 = infinity

Barrels http://www.barrelman.com.au 

VW Workshop - aircooledgarage.com.au
allcooled.com.au
Membervwo60
Veteran Volks Folk
*****


Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on July 8th, 2012 at 06:05 PM



What oil pressure is it at 3000RPM, 11 PSI at hot idle sounds alright, my 2054 is 20PSI at hot idle and 60PSI at 3000RPM.
Membergrumble
Son of Jim - Creator of Good
******


Avatar


Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline

Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time

posted on July 8th, 2012 at 06:15 PM



Another few more factors that will affect the pressure are the bearing clearances,oil pump (HD 30mm gears or std),the length of the oil pressure relief valve springs,ignition timing and the oil operating temperature.
Membervwo60
Veteran Volks Folk
*****


Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on July 10th, 2012 at 10:47 AM



What is your oil pressure at 3000RPM.


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 2.0% - SQL: 98.0% ]