| [ Total Views: 587 | Total Replies: 4 | Thread Id: 99436 ] |
|
|
 astroboy57
Learner Dubber
Posts: 1
Threads: 1
Registered: October 29th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
 posted on October 29th, 2012 at 01:49 PM |
|
|
need some advice 1600 to 2000 motor swap
I have a 1979 kombie with a 2 litre motor, is has done a exhaust valve in #2 cylinder, so I have to rebuild, unfortunately I have to save first, as I
think it will cost around $3,500-$4000 to do it. I have a 1971-72 superbug with a rusted out body, but the 1600 motor is bloody good in it. Is it
possible to swap over motor and gearbox from the Superbug to my 1979 Kombie??, I am fairly handy, with tools, so a little bit of adaptation is not a
big problem for me.
 |
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on October 29th, 2012 at 02:16 PM |
|
|
maybe not, i think the gear boxes are different and the kombi motor has a mount near the bottom of the crank pully,?
then you need all the tin ware for a 1600 into a kombi.
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on October 29th, 2012 at 03:43 PM |
|
|
The input shaft is too long for a type 1 engine (type 4 have the needle bearing in the crank, type 1 have them in the flywheel nut) and engine mounts
and tinware issues as Ian says.
Also a 1600 is gonna struggle to get a Kombi moving with 2L gearing, may want to look at fitting a 1600 3 rib gearbox if you're gonna run a 1600
engine.
Might be easier to just get some reco heads for your current engine?
|
|
|
Klaus
Custom Title Time!
Posts: 1439
Threads: 100
Registered: August 25th, 2004
Member Is Offline
Location: Wollongong
Theme: UltimaBB Pro Blue ( Default )
Mood: Heavily modified
|
| posted on October 29th, 2012 at 04:36 PM |
|
|
done it a few times , not the most powerful combo with 2ltr box , but it would do as a temp solution , if u change to 3 rib 1600 box you have to
change or lengthen the shift rod, if u keep the 2ltr , changing the bellhousing and input shaft isnt that hard .
hardest part will be locating crossmember and tinware oh and modifying inlet manifold for a vacumm pipe for booster
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on October 30th, 2012 at 07:29 AM |
|
|
http://www.thesamba.com/vw/classifieds/detail.php?id=1372817
|
|
|
