Posts: 358
Threads: 11
Registered: December 24th, 2008
Member Is Offline
Location: Terrigal NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Sick of Work
posted on March 15th, 2014 at 08:53 AM
Quote:
Originally
posted by sunburntwilly
Quote:
Originally
posted by MickH
Rubbish....I did my last one 12 months ago.....car (donor) was $500 all the smallcar stuff was less than $3500 delivered and the loom was 350 to
modify. That made it basically a bolt in conversion...2 day job
Just a quick question if you don't mind could you tell me who did the modified loom. Was it in Aus or small car?
I think Mick had AM Autos in Noosa do it.
American vehicles have different looms and hence they will often not work in an Australian delivered Scooby donk to T3 set-up.
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood:Brad'ed Off
posted on March 15th, 2014 at 09:32 AM
Ok I'll clear this up. Adam did Mick's loom not AM Auto, he had a '96 engine but used the manifold and wiring from the '90 - '94 Liberty. The
'90 - '94 loom is well documented here and on other sites. The 06/94 - '96 loom is different but no harder to do, the ECU pin out is on here and I
got wiring diagrams from the local library for the loom.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
