Board Logo
Go To Bottom

Printable Version  
[ Total Views: 245342 | Total Replies: 672 | Thread Id: 68967 ]
 Pages:  1  2  3  4  ..  23
Author: Subject:  Stanley's car....1 1/4" Tranny raise 28Jun14
Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on July 8th, 2008 at 10:09 PM



Kung Foo Panda. Must have a bit of 'wax on-wax off'

you could make that 'bog on-bog off'




Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
MemberLIFE IN THE LOW LANE
A.k.a.: Brennden Alder
Son of Jim - Creator of Good
All people have the right to stupidity but some abuse the privilege
******


Avatar


Posts: 2534
Threads: 53
Registered: March 11th, 2007
Member Is Offline

Location: Murrumba Downs - Brisbane
Theme: UltimaBB Pro Orange
Mood: What Kombi wants vs what Kombi gets are nowhere near the same...

posted on July 9th, 2008 at 11:06 AM



Kung Foo Panda. Not a bad movie for a kids flick I say!!



[size=4] ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE[/size]

Alder Outlaws VW Racing - check it out on fb!!
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 9th, 2008 at 05:35 PM



Matt and I seem to be level pegging. He's a bit further on the body work but my engine is ready to go.

Now the sun is out finally a chance to make some progress. Should be ready for primer Friday or Saturday.

Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.
MemberDasdubber
A.k.a.: Alan Agyik
23 Windows of Awesome
DAS Resto Haus
********


Avatar


Posts: 5746
Threads: 289
Registered: August 26th, 2002
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue
Mood: feeling fine...

posted on July 9th, 2008 at 07:20 PM



Nice work Stanley - fine weather ahead so there will be no stopping ya!



Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on July 9th, 2008 at 09:22 PM



Good to see the sun out today. The weatherman said 45% humidity in Bris today, You must be happy with that Stanley, bog on!!!



Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 10th, 2008 at 07:40 AM



Quote:
Originally posted by matberry
Good to see the sun out today. The weatherman said 45% humidity in Bris today, You must be happy with that Stanley, bog on!!!


yeh but wind is bloody freezing. I'm off to take number 1 apprentice sander to see kung fu panda this morning as per deal. Hopefully by the time i get back things may have warmed up a bit.
Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on July 10th, 2008 at 08:14 AM



Hope you and your apprentice enjoy the movie [paint and bog application and removal lesson].

COLD...heck yeah, our corro roof let go a huge sheet of ICE this morning, and this is the supposed 'Sunshine Coast'




Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 10th, 2008 at 06:58 PM



Well Kung Foo Panda is done and dusted and tomorrow is the last day I am prepared to sand. My thumb and index finger on my right hand a bleeding from sanding.
I blame Al (dasdubber) because he makes things look so easy.....:smilegrin:
MemberDasdubber
A.k.a.: Alan Agyik
23 Windows of Awesome
DAS Resto Haus
********


Avatar


Posts: 5746
Threads: 289
Registered: August 26th, 2002
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue
Mood: feeling fine...

posted on July 10th, 2008 at 08:33 PM



Amazing how much time this takes hey mate! Your arm gets "work hardened" eventually so it gets easier......however this means as soon as you finish this one you have to start another project to maintain the muscular conditioning you have developed in recent weeks! :lol:



MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 11th, 2008 at 07:09 AM



Quote:
Originally posted by Dasdubber
Amazing how much time this takes hey mate! Your arm gets "work hardened" eventually so it gets easier......however this means as soon as you finish this one you have to start another project to maintain the muscular conditioning you have developed in recent weeks! :lol:



mmmm...I hope not....to use a quote I picked up from someone we all know..."I'd rather shred my arse with broken glass and sit in tobasco sauce".

well maybe that's a bit harsh but it's a good quote. Any idea who?
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591

posted on July 12th, 2008 at 07:38 AM



Hmm, sounds familiar.

So>

Where's the updates dude!?




Quote:
Originally posted by westi
That's mad Alan.
Memberkroozzn63
Bishop of Volkswagenism
******


Avatar


Posts: 3005
Threads: 317
Registered: January 31st, 2004
Member Is Offline

Location: sydney
Theme: UltimaBB Pro Yellow
Mood: mmm coffee

posted on July 12th, 2008 at 08:48 AM



pics pics please



show us your gates
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 12th, 2008 at 02:12 PM



I just finished the first coat of primer and I'm not entirely happy with the result. I was using a high build etch primer with (I think) too small a nozzle which lead to a mixed result. Tried a mixture of paint to thinner ratios and air pressure but ultimately had to thin it too much to get it to cover. As a result no pic until the second coat which hopefully will go on better with a different spray gun.
I also gotta keep reminding myself what it's going to be used for so there is no need to get too anal about the result.

That means only one thing....more sanding. Although I have been banned from the shed until 10.00am tomorrow.
Memberkroozzn63
Bishop of Volkswagenism
******


Avatar


Posts: 3005
Threads: 317
Registered: January 31st, 2004
Member Is Offline

Location: sydney
Theme: UltimaBB Pro Yellow
Mood: mmm coffee

posted on July 12th, 2008 at 02:15 PM



QUICK RESPONSE IM IMPRESSED



show us your gates
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on July 12th, 2008 at 02:44 PM



Don't worry Andrew.... I'm use to waiting for shit to happen... All in good time.:smirk:



FUCH your early!

http://www.noh2o.org/ 
MemberDasdubber
A.k.a.: Alan Agyik
23 Windows of Awesome
DAS Resto Haus
********


Avatar


Posts: 5746
Threads: 289
Registered: August 26th, 2002
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue
Mood: feeling fine...

posted on July 12th, 2008 at 09:00 PM



Hey Andrew, I use a 2mm tip on my primer gun when spraying high build. You can get away with a 1.8 but if you are using a 1.4 it can be very slow going. Over reducing can cause it to lose some of its high build qualities. You can speed up the sanding process if you have a palm sander (shorter throw than normal dual action) - spray a light guide coat then hit it with say 400 on the d/a palm sander but not taking it all off.....depending on which colour you are painting (and what paint) you can then shoot another quick guide coat and hand sand with 600 or 800 (wet) before paint. If you sand the high build by hand from the start and you have a lot of orange peel or dry spray (possible with small tip) it will take a long time. Everyone does it different so if Helbus, matberry, rexy, DubCrazy or the other guys who have experience in this area reading this has alternative advice/ideas that would be great. The above is just what works for me.
Al




MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 13th, 2008 at 08:51 AM



Thanks Al.
The gun I was using was a 1.4. It's fine for normal primer and finish coat but struggles with the high build. It was very slow going. I have another gun now so will sand and try again. I did end up with some dry spray in those hard to get areas which really pissed me off as this will take time to fix. The other thing which freaked me out was the primer was a mustard yellow colour when I was expecting a traditional grey. With it over reduced to apply it took a lot to get it to cover.
Thanks again
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 13th, 2008 at 05:53 PM



It's amazing what a different spray gun is like. The new gun I used also had a 1.4 tip but it was 100% better than my other one. Don't know if the gravity feed made a difference but it was great.

Still not 100% happy with the undercoating. I think the damage was done with the first coat but I can't be bothered spending countless hours fixing it. The sanding and application of the second coat has fixed a lot of the imperfections.

The yellow is a shit colour to spray because in the light I had it was almost impossible to see the spray as it went on which made it difficult to get a good overlap.

Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.
MemberLIFE IN THE LOW LANE
A.k.a.: Brennden Alder
Son of Jim - Creator of Good
All people have the right to stupidity but some abuse the privilege
******


Avatar


Posts: 2534
Threads: 53
Registered: March 11th, 2007
Member Is Offline

Location: Murrumba Downs - Brisbane
Theme: UltimaBB Pro Orange
Mood: What Kombi wants vs what Kombi gets are nowhere near the same...

posted on July 13th, 2008 at 07:26 PM



Looking good so far Stanley. You ready to rob a bank yet and leave no fingerprints after all that sanding ???



[size=4] ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE[/size]

Alder Outlaws VW Racing - check it out on fb!!
Memberwesti
Custom Title Time!
what the
*****


Avatar


Posts: 1610
Threads: 28
Registered: August 30th, 2005
Member Is Offline

Location: milperra
Theme: UltimaBB Pro Blue
Mood: not blue, pink

posted on July 13th, 2008 at 08:24 PM



you could always use a paint brush.lol



down sharon.
http://i108.photobucket.com/albums/n1/westibug/cougar.jpg
MemberDasdubber
A.k.a.: Alan Agyik
23 Windows of Awesome
DAS Resto Haus
********


Avatar


Posts: 5746
Threads: 289
Registered: August 26th, 2002
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue
Mood: feeling fine...

posted on July 13th, 2008 at 09:17 PM



You could leave it as is and run it in high build primer on the strip.....I can see big old school metalflake lettering down the side "BUTTERCUP BANDIT"

hehehe....it is a nice yellow mate :smilegrin:




MemberDak-A-Tak
A.k.a.: Peter Page
Custom Title Time!
Volksie Pete
*****


Avatar


Posts: 1381
Threads: 216
Registered: January 9th, 2004
Member Is Offline

Location: Qld , Bethania
Theme: UltimaBB Pro Blue ( Default )
Mood: faster ,faster ,Done

posted on July 13th, 2008 at 11:01 PM



Great undercoat colour , for yellow .As what I used for mine a little more orange but ( delux's 2k )
Looks like the Banana splits drag bug ! Good name :smilegrin: Not the, she colour that guys over the boarder love !
Looking good mate .
Memberpunchbuggyracer
A.k.a.: Rob Tratt
Seriously Crusin Dubber
**


Avatar


Posts: 152
Threads: 22
Registered: April 30th, 2006
Member Is Offline

Location: ANNERLEY, QLD
Theme: UltimaBB Pro Black
Mood: Above average!

posted on July 14th, 2008 at 12:03 PM



Isnt that yellow stuff 'primer putty filler'? I dont know if it can go straight on bare metal. I used it on my first beetle, the results were great, I used big bits of cut up boogy board to sand it back, it left nice curves.



Street N Park The experts in dialling scooters
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 27th, 2008 at 06:52 PM



Was going to wait untilit was finished to put more pics up but Dave has coaxed me to add some.

Put the engine in on Saturday mainly so I could see if the spring plates needed resetting and to see hoe the rear wheels sat. Seems to be ok at the moment but the front needs to come down some.
Wiring is underway and hopefully I can start putting the lexan windows in next weekend. Also need to fit the traction bar from the white beetle so some new brackets will need fabbing. I also need to pinstripe around silver flash. Still in two minds exactly what I will use yet.

Other than that it's getting there, although I did discover the rear apron won't fit without some serious cutting. Might run without it yet.

Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.
MemberStanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
*******


Avatar


Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline

Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go

posted on July 27th, 2008 at 06:55 PM



Bonnet is still waiting final paint thanks to the recent rain.
And thanks to Peter Page for the f/glass headlights.

Error
Sorry, you must be a registered user in order to download attachments.
MemberHGFS
A.k.a.: Greg
Wolfsburg Wizard
***


Avatar


Posts: 531
Threads: 42
Registered: February 22nd, 2005
Member Is Offline

Location: Adelaide - Vale Park
Theme: UltimaBB Pro Brown
Mood: OK, I guess?

posted on July 27th, 2008 at 06:59 PM



Hey Stanley love your work, you cant beat a turbo'd early drag car.

Can you tell me what size & offset the rear wheels are, the fitment looks just perfect with the fender width etc. If it comes down a bit the tops would tuck nicely into the fenders wouldn't they?

I'm hoping for a similar setup on my 59 when I get to that bit.




1954 Oval long term project going nowhere
1958 Beetle drag car project
1959 Beetle project I need to sell one day
1969 Squareback
Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on July 27th, 2008 at 06:59 PM



Good stuff mate.
Always inspirational to see other people working hard with a mission....love it.




Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
Memberoldskl60
Officially Full-On Dubber
***


Avatar


Posts: 251
Threads: 28
Registered: March 9th, 2008
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue

posted on July 27th, 2008 at 07:44 PM



Looking sensational Andrew!! Can't wait to see it in action - not far by the looks.
Cheers
Tom




http://4.bp.blogspot.com/_0YtLR7Gj2Tw/SlsMWR7pLcI/AAAAAAAAAAM/CDqzMEYH70E/S1600-R/oldskl60-footer1a.jpg
Member11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
*******


Avatar


Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline

Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n

posted on July 27th, 2008 at 08:00 PM



Looks good, cant wait to see it at Warwick



65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on July 27th, 2008 at 10:38 PM



Wow Andrew.... Thats looking brilliant... Your making me itchy to get back in the shed mate!!!!



FUCH your early!

http://www.noh2o.org/ 
 Pages:  1  2  3  4  ..  23


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 12.7% - SQL: 87.3% ]