| [ Total Views: 606 | Total Replies: 5 | Thread Id: 100441 ] |
|
|
 rustys
Casual Dubber
Posts: 24
Threads: 10
Registered: January 6th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2013 at 01:18 PM |
|
|
Headlights?
Hey guys,
So I just re-installed my engine after replacing a cylinder head. After re-installing, the headlights were not working (only the small parking lights
worked). So I changed the bulbs. When I did, not only did the new bulbs not work..but neither did the parking lights. So I changed to all new fuses
and cleaned the connections on them...and still no luck. Any ideas?
Thanks in advance!
('65 1200cc, 12volt system)
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on January 11th, 2013 at 01:33 PM |
|
|
before you change anything else get the test light out and start looking for where the power is and is not..
that would be my first point of call before replacing bits
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2013 at 01:42 PM |
|
|
Sorry h said - get a meter or test light and check for power
My guess is it will be the earth
Futue te ipsum!!!
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on January 11th, 2013 at 01:46 PM |
|
|
yes to above re earth, (checking both goes without saying in my book but this is the intranet  )
|
|
|
cesiumfrog
Seriously Crusin Dubber
Posts: 161
Threads: 7
Registered: April 20th, 2005
Member Is Offline
Location: wagga
Theme: UltimaBB Pro Blue
|
| posted on January 11th, 2013 at 02:04 PM |
|
|
it's gotta be related to the wires you disconnected to remove/replace engine.
been caught by the numberplate light before.
and the earth wires to the body in the engine bay.
|
|
|
rustys
Casual Dubber
Posts: 24
Threads: 10
Registered: January 6th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2013 at 02:58 PM |
|
|
thanks all. after checking with meter, it had lost power from somewhere. couldn't figure out where the wires were going to in the back...but found
an extra relay where someone had a spotlight or something hooked up years ago. so i transfered power from there. good enough for me! appreciate the
help guys.
|
|
|
