Posts: 478
Threads: 82
Registered: March 1st, 2008
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Grey
Mood: Born 10 minutes late & never caught up.
posted on January 28th, 2013 at 02:01 PM
Floorpan Reinforcement
Guys,
While I have the pan off, I thought I might reinforce the outer channels.
Seems most people use tube.
Is there any reason why you wouldnt use say 30x30x3mm angle iron and avoid tube crush issues ect?
Cheers
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
wild baja
Casual Dubber
Posts: 26
Threads: 3
Registered: September 19th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on January 28th, 2013 at 02:12 PM
You could weld short crusher tubes in the the 30 SHS at each bolt or
might sound like overkill.................. but I used 30 x 30 solid squar bar tucked up in the chanell sides and back of the pan halves tied into the
rear torsion tube to reinforce my 2.5lt suby baja. Best way I could see to get it over 1000kg thus legal 7" rims.
