| [ Total Views: 698 | Total Replies: 9 | Thread Id: 101331 ] |
|
|
 TorxKiwi
A.k.a.: Dean Newell
Officially Full-On Dubber
Posts: 231
Threads: 38
Registered: June 12th, 2011
Member Is Offline
Location: Torquay, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: "It's not easy being green"
|
| posted on March 23rd, 2013 at 06:12 PM |
|
|
Brakes - To stop or not to stop.....
Just replaced rear brake shoes and did springs etc. while I was at it. Adjusted everything and all seems fine. Except ......
Went for a drive around the block and pedal was soft ..... essentially non-existent. For some reason I decided to have a look under the front of the
car and there was brake fluid dripping off the body around the master cylinder. I gave it a wipe down to try and figure out what was going on and it
appeared that the hose from the reservoir had come loose on the 'nipple'. Tightened it all up gave the pedal pump and I can get pressure again.
Do I just need to bleed the system or is there more to it after breaking the circuit on the inlet side?
"Ownership of a Beetle is not a destination it is a journey." |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on March 23rd, 2013 at 06:33 PM |
|
|
It would be a good idea to bleed the system again, as you said the pedal went soft indicating that there was air in the master cylinder, i always
bleed my brakes twice as a matter of course about a week after the initial bleed when i have driven the car a couple of hundred KLm's, i alway seem
to get a bit more air out of the system the second time.
|
|
|
cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
| posted on March 23rd, 2013 at 07:18 PM |
|
|
If your flexible lines are old you might also want to look at changing them as well.
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on March 23rd, 2013 at 09:16 PM |
|
|
Also re adjust your rear shoes after about 100k's of driving.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on March 24th, 2013 at 06:51 PM |
|
|
| Quote: | Originally
posted by Craig Torrens
Also re adjust your rear shoes after about 100k's of driving.
|
and with the handbrake backed off 1st
|
|
|
TorxKiwi
A.k.a.: Dean Newell
Officially Full-On Dubber
Posts: 231
Threads: 38
Registered: June 12th, 2011
Member Is Offline
Location: Torquay, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: "It's not easy being green"
|
| posted on March 24th, 2013 at 07:04 PM |
|
|
Cheers guys, getting there.
"Ownership of a Beetle is not a destination it is a journey." |
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on March 24th, 2013 at 10:44 PM |
|
|
I hd a weird airlock in my dual circuit system. Ended up having to clamp each of the fronts in turn to get the pedal hard and then bleed normally.
Been fine ever since but boy did it take some to figure out. Even my vac bleeder didn't remove all the air.
madness is in the eye of the beholder  |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on March 24th, 2013 at 11:18 PM |
|
|
| Quote: | Originally
posted by TorxKiwi
Just replaced rear brake shoes and did springs etc. while I was at it. Adjusted everything and all seems fine. Except ......
Went for a drive around the block and pedal was soft ..... essentially non-existent. For some reason I decided to have a look under the front of the
car and there was brake fluid dripping off the body around the master cylinder. I gave it a wipe down to try and figure out what was going on and it
appeared that the hose from the reservoir had come loose on the 'nipple'. Tightened it all up gave the pedal pump and I can get pressure again.
Do I just need to bleed the system or is there more to it after breaking the circuit on the inlet side?
|
You could have a bit of air in the master cylinder...
only takes a small bubble to cause problems..
are the rear cylinders and rear hoses still original?
I would recommend replacing them all.
and keep bleeding slowly until the bubbles disappear..
cheers
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
TorxKiwi
A.k.a.: Dean Newell
Officially Full-On Dubber
Posts: 231
Threads: 38
Registered: June 12th, 2011
Member Is Offline
Location: Torquay, Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: "It's not easy being green"
|
| posted on March 25th, 2013 at 05:10 AM |
|
|
New hose all round 12 months ago. Pedal is still mushy but the brake fluid is running clear in the hose. I'm guessing there is air in there somewhere
and the master cylinder seems the most logical.
"Ownership of a Beetle is not a destination it is a journey." |
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on March 25th, 2013 at 08:12 AM |
|
|
you might not get a rock hard pedal with the dual circut master cylinder, none of my cars have that, you could try power bleeding them.
|
|
|
