| [ Total Views: 505 | Total Replies: 5 | Thread Id: 101951 ] |
|
|
 x275
Commited Dubber
Posts: 61
Threads: 19
Registered: March 3rd, 2013
Member Is Offline
Theme: UltimaBB Pro Black
|
| posted on May 9th, 2013 at 08:47 PM |
|
|
71 bug selector rod rattle
Hello,
I have just replaced my rubber selector shaft coupling that connects between the box and selector rod with a new solid billet piece. I now have a
rattle that sounds as though the selector rod is knocking against something in the tunnel..
I have removed the gear stick and from what I can see there
is a brass bush through an eyelet type bracket that holds the rod up towards the stick but nothing else down there.
I've moved the selector rod up and down, side to side and there doesn't feel like there is any horizontal or vertical movement.
The rattle occurs while i'm driving, if i hold the stick with a little bit of pressure it goes away.
The rattle isn't there in neutral. It did make a slight rattle before I changed the coupling at the back, but the solid coupling seems to have
magnified the sound.
It changes gears fine apart form 3rd to 2nd but I believe this to be the second gear syncro..
Any help would be appreciated.
Regards,
Conan
|
|
|
 Yogie
Super Moderator
Posts: 1603
Threads: 108
Registered: June 7th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
|
| posted on May 9th, 2013 at 08:50 PM |
|
|
There is a bushing that goes in to the eyelet near the gear shift itself. If you replace that it should fix the problem for you. It means taking out
the shift rod though.
Yogie
|
|
|
x275
Commited Dubber
Posts: 61
Threads: 19
Registered: March 3rd, 2013
Member Is Offline
Theme: UltimaBB Pro Black
|
| posted on May 9th, 2013 at 09:17 PM |
|
|
Where can I find out information on removing the shift rod ?
Cheers,
Conan
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on May 9th, 2013 at 09:40 PM |
|
|
Beetle or Superbug?
Instructions for both here:
http://forums.aussieveedubbers.com/viewtopic.php?tid=68078
|
|
|
x275
Commited Dubber
Posts: 61
Threads: 19
Registered: March 3rd, 2013
Member Is Offline
Theme: UltimaBB Pro Black
|
| posted on May 9th, 2013 at 10:29 PM |
|
|
Mines a super bug, I marked my spring plate and set it back down where it came from, perhaps I should try move it more to left and see if that
resolves my grind when I down shift into 2nd..
Thanks for the advice. Where is the best place to get a quality bush ?
Cheers,
Conan
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on May 9th, 2013 at 10:42 PM |
|
|
Depends where the Oz vendor gets em from. Ring Micks or Vintage for the selector rod front bush and retainer clip.
Any of the UK or USA shops can order it online and depending on Oz post could be here in a week 
madness is in the eye of the beholder  |
|
|
