Posts: 159
Threads: 70
Registered: October 19th, 2006
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on November 19th, 2013 at 04:46 PM
wtd: brisbane,rebuildable 1600 engine
hey all,chasing a rebuildable 1500/1600 engine or parts there of,crank, rods,pushrods heads etc.anyone got any bits they want to part with?
will travel around bris to pick up.
pm or message 0414645635or just post on here,cheers,Jack.
jamiesc
Wolfsburg Wizard
Posts: 559
Threads: 106
Registered: December 30th, 2010
Member Is Offline
Location: bayside brisbane
Theme: UltimaBB Pica Red
posted on November 19th, 2013 at 08:33 PM
ive got a 1776 new pistons bigger head and crank the whole lot if your interested in spending more pm me for more infor
cheers jamiesc
spectral
Casual Dubber
Posts: 39
Threads: 8
Registered: February 21st, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on November 20th, 2013 at 08:08 AM
I have this one which is complete inc carby, fuel pump, coil, and exhaust/extractors, clutch etc. I'll take $175 for it. I'm near Chermisde. (on
the edge of Wavell Heights)
Its a 1969 1500cc single port I believe. The last shot has the engine number so you can do your research
There is a couple of drips of oil on my concrete from where it has been sitting for over a year. The carby is covered over so there isn't any
nasties in there and it still turns over no probs.
Posts: 159
Threads: 70
Registered: October 19th, 2006
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on November 24th, 2013 at 06:59 AM
pm me a price jamie,and details of what you have,I have crank,rockers and cam and case ,basically looking for all the extra bits to build up a mild
engine
spectral I also sent you a pm,cheers,Jack.
spectral
Casual Dubber
Posts: 39
Threads: 8
Registered: February 21st, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on November 24th, 2013 at 07:55 AM
thanks jack, replied. I saw you sent it a while ago... seems i'm not getting PM notifications via email. Sorry for delay.
mangrovejack38
Seriously Crusin Dubber
Posts: 159
Threads: 70
Registered: October 19th, 2006
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on November 24th, 2013 at 09:51 AM
pm's mustnt be working spec
bushed
Wolfsburg Elder
Posts: 3539
Threads: 66
Registered: December 18th, 2006
Member Is Offline
Location: Lowood Qld
Theme: UltimaBB Pro Blue ( Default )
posted on November 24th, 2013 at 10:50 PM
IF U NEED HTR BXES oops
clutch carb etc I have, seems a 1500 case compl
1 recoed head n more
and tinware Jack
b
want any vw bits old but like me, Made in Germany!!!
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on November 25th, 2013 at 06:59 AM
Mate i got a pulled apart 1600 long block complete. I'll even throw in a box of new pistons for $150 (no barrels or rings).
Your choice of dual port of single port heads. The motor came with single port heads.
I bought it for $550 on the Action day before last (engine) and pistons for $40 (NOS brazilian). It was a working 1600 but had not been moth-balled
properly and so I stripped it down for a rebuild. This is as far as i got before i bought an ally case and gone for a turbo, bored, stroked project
for my baja. Its just sitting in my shed consuming space. At least its in a state where you can really inspect the components and see if it suits
you.
Thanks,
Chris.
0402 568 003
Location: cornubia, SEQ (5 mins from Loganholme Hyperdome)
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!