| [ Total Views: 631 | Total Replies: 9 | Thread Id: 104604 ] |
|
|
 Newt
Wolfsburg Wizard
Posts: 478
Threads: 82
Registered: March 1st, 2008
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Grey
Mood: Born 10 minutes late & never caught up.
|
| posted on January 5th, 2014 at 11:24 PM |
|
|
Setting Toe In (Front and Rear).
Hi Guys,
A couple of years ago I tried to get a shop to give me a 4 wheel wheel alignment. They didnt do it as they said it was too low to get on there
machine.
Ive almost finished rebuilding the pan and was wondering if setting up the front and rear alignment is something that can be done before the body goes
back on.
As an aside - once back on the road, Im aiming to have it a couple of inches lower than original (dont know if that will change the alignment).
It was just a thought.
(Its a new back bone, so I dont have a firm starting point for the rear alignment).
Cheers
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
|
|
|
nils
Fahrvergnugen
Posts: 971
Threads: 65
Registered: January 11th, 2008
Member Is Offline
Location: central coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 6th, 2014 at 04:53 AM |
|
|
You can set your own toe.It's probably easier while the body is off actually, seeeing as you don't have the guards to contend with. l would get it
as close to the final ride height as possible though. I use brickies string line and a level. Run 2 strings parallel along the sidewalls of your tyres
at the height of your axle (you may have to do this twice as your front and rear track are probably different) and use a level for the camber.
Quit calling rust patina
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on January 6th, 2014 at 06:11 AM |
|
|
You really need to set the toe with the car as it will be on the road....tank full, spare wheel, and driver in place.
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on January 6th, 2014 at 08:40 AM |
|
|
| Quote: | Originally
posted by HappyDaze
You really need to set the toe with the car as it will be on the road....tank full, spare wheel, and driver in place.
|
x2
waste of time before it's FULL weight
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
colin
Fahrvergnugen
Posts: 984
Threads: 82
Registered: March 7th, 2007
Member Is Offline
Location: Tamworth
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 6th, 2014 at 06:40 PM |
|
|
| Quote: | Originally
posted by matberry
| Quote: | Originally
posted by HappyDaze
You really need to set the toe with the car as it will be on the road....tank full, spare wheel, and driver in place.
|
x2
waste of time before it's FULL weight
|
x3
Take it to an alignment shop,
While string and your eye will get it close a machine will get it within tenths of a millimetre across the total toe.
Cheers Col
|
|
|
nils
Fahrvergnugen
Posts: 971
Threads: 65
Registered: January 11th, 2008
Member Is Offline
Location: central coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 6th, 2014 at 06:56 PM |
|
|
Well if you want to do it properly 
Quit calling rust patina
|
|
|
Newt
Wolfsburg Wizard
Posts: 478
Threads: 82
Registered: March 1st, 2008
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Grey
Mood: Born 10 minutes late & never caught up.
|
| posted on January 6th, 2014 at 11:25 PM |
|
|
Cheers Guys - I wasnt holding my breath on this one (just pondering).
Newt
It is as it is - If you didnt enjoy today, you've missed the opportunity.
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on January 7th, 2014 at 05:37 AM |
|
|
Don't forget, when it's time for the wheel-alignment, any machine is only as good as its operator. 
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on January 7th, 2014 at 08:55 AM |
|
|
Something else that will help, when your assembling the front end, rough it out close as you go, this is important as most alignment shops don't want
to spend the time fiddling with this and it's very important for a few reasons, to have min play in the steering box and to get equal turning
lock-to-lock. Centre the steering box with no tie rods fitted, then set the tie rod lengths to get the wheels straight ahead by sighting the inside
edge of the tyre to align it to be near the inside rear tyre edge (all at ride height ie on the ground)
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on January 7th, 2014 at 09:13 AM |
|
|
| Quote: | Originally
posted by HappyDaze
You really need to set the toe with the car as it will be on the road....tank full, spare wheel, and driver in place.
|
exactly! does not work otherwise.
suspension and steering geometry is dynamic, thats why it need to be set in a state the car will be in most of the time.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
