| [ Total Views: 1584 | Total Replies: 15 | Thread Id: 104931 ] |
|
|
 pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on February 2nd, 2014 at 07:39 AM |
|
|
Which compensator is better? original or scat?
So after my first motorsport event, I need to fit a camber compensator. What I'm wondering is, which sort is better?
https://www.classicveedub.com.au/cvd_ne ... s_id=15377
The scat style "push up" sort...
Or the oldschool sway a way reissue...
https://www.classicveedub.com.au/cvd_ne ... s_id=17992
They'll cost pretty much the same, so which do I choose?
|
|
|
Camo
A.k.a.: Kev
Custom Title Time!
Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline
Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue
|
| posted on February 2nd, 2014 at 11:37 AM |
|
|
Pete,
neither of those links are working for me. Will make it harder for people to answer.
Kev
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on February 2nd, 2014 at 12:20 PM |
|
|
http://www.classicveedub.com.au/cvd_new/part_detail.aspx?parts_id=17992
http://www.classicveedub.com.au/cvd_new/part_detail.aspx?parts_id=15377
|
|
|
oldtub356
Seriously Crusin Dubber
Posts: 139
Threads: 14
Registered: December 6th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 10th, 2014 at 09:31 AM |
|
|
I like these....except for the cost...shipping would be extreme.
http://www.356enterprises.com/SuspensionAndBrakes.html
These are adjustable, the fronts should be too.
The outsides mount on the lower of the x3 SpringPlate bolts - with a longer bolt.
I also use a turnbuckle at BOTH ends.
Should be able to home make one - used to be a car spring manufacturer at Penrith??
Also needs a locator to stop swivelling on the centre..on 'push-up'.
Do a search on racing Isuzu Bellets and Triumph Spitfires to see what they have done. (scary).
Because this set-up provides a variety of potential suspension tuning arrangements...everyone has their own favourite set-up opinions ....I definitely
don't want to get into that discussion!!
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on February 10th, 2014 at 06:12 PM |
|
|
Have you ever used one?
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on February 10th, 2014 at 06:48 PM |
|
|
Contact Greg Mackie, he will push in the right direction.
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on February 10th, 2014 at 07:37 PM |
|
|
Daimo, I can't comment on any proprietry compensating spring, as I have always made my own.....the first was in 1960.
There are a number of things to consider in the design of the spring....such as the type of car, what it will be used for, wheels & tyres, etc.
Formula Vees [as a rule] use the 'compensating spring' as the only rear suspension, with 'zero roll-resistance', and droop-limit cables or
rods.
Pete, I would suggest you do some research, and 'get your head around' the whole swing-axle thing. Just bolting on a spring possibly may not help at
all. My 1.5c worth.
Cheers, Greg
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on February 10th, 2014 at 07:58 PM |
|
|
| Quote: | Originally
posted by HappyDaze
Daimo, I can't comment on any proprietry compensating spring, as I have always made my own.....the first was in 1960.
Cheers, Greg
|
I'd say that's a shove in the right direction then.
Exchange phone numbers, Pete would learn a shirt load from a few minutes of your time. You have lots of knowledge to impart on us mere mortals
|
|
|
oldtub356
Seriously Crusin Dubber
Posts: 139
Threads: 14
Registered: December 6th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 10th, 2014 at 09:05 PM |
|
|
Yes, I agree.
Pete, It depends upon what sort of racing that you are doing. If Historic, you will need to research what mods/aftermarket bits are allowed in Groups
Na/Nb. I know that Compensator/Regulators are allowed on 356s in Class Sa/Sb for all years, even though they were first used in 1959.
Last year, Vic Skirmants...who makes the Regulators (above), did couple of races at Eastern Creek with his regulator installed and timed at '1:55'
in Group Sa with a 1500cc engine. The car sat dead flat everywhere.
I have had two road cars with a Regulator. The first was one that I made and it replaced the factory Compensator. It was about the same length as the
ones that you mention above but with about three times the cross section. The other one, in my current 356 is a Kevin Pedders copy of the Skirmants
bar but with only the single spring for road only use....with a matched front roll bar.
Find out what you are allowed in your Group of racing and suck Gregs brain dry... before he forgets it all.
|
|
|
sander288
Custom Title Time!
"Bolt-on Master"
Posts: 1404
Threads: 183
Registered: August 26th, 2008
Member Is Offline
Location: Norman Park, QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: This is my bug. There are many others like it, but this one is mine.
|
| posted on February 10th, 2014 at 10:12 PM |
|
|
Comp springs are permitted in Na and Nb for beetles too.
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on February 10th, 2014 at 10:13 PM |
|
|
| Quote: | Originally
posted by HappyDaze
Daimo, I can't comment on any proprietry compensating spring, as I have always made my own.....the first was in 1960.
There are a number of things to consider in the design of the spring....such as the type of car, what it will be used for, wheels & tyres, etc.
Formula Vees [as a rule] use the 'compensating spring' as the only rear suspension, with 'zero roll-resistance', and droop-limit cables or
rods.
Pete, I would suggest you do some research, and 'get your head around' the whole swing-axle thing. Just bolting on a spring possibly may not help at
all. My 1.5c worth.
Cheers, Greg
|
Thanks Greg. I've spent the last few years looking into swingaxle stuff just out of curiosity. When I got the 56' I did so with the intention of
making it go round corners properly and safely.
I'm not racing in a class per se, just doing khanas on dirt and the skid pan, maybe the odd lap dash at Marulan or similar. It's a road car that
will do club days and drive home afterwards. I wish I could do something like your new black track car, but no cigar.
Love to hear your thoughts though. The car is essentially stock at the mo, did my first skid pan the other day, so I have something to work from now.
|
|
|
sander288
Custom Title Time!
"Bolt-on Master"
Posts: 1404
Threads: 183
Registered: August 26th, 2008
Member Is Offline
Location: Norman Park, QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: This is my bug. There are many others like it, but this one is mine.
|
| posted on February 10th, 2014 at 10:19 PM |
|
|
You may find a rear ride height tweak and bigger front sway bar may achieve some good results. Greg Mackie helped me lower my car to get around 1.5
neg camber and that alone improved my Wakefield lap time by 7 seconds!! Only changes since have been bigger front bar 19mm and comp spring.
Difference between before and after is basically more composed handling with the comp spring.
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on February 11th, 2014 at 07:08 AM |
|
|
The '56 Cabriolet that I've just finished is completely stock in the suspension. The only mods are....Koni shocks, zero rear camber, and 5.5"x15"
wheels. No comp. spring, no front A/R bar. The tyres are old GT Radials that came off the Spyder, a few years back. Is it fun to drive? 
One area that is often overlooked is tyres. They can sometimes make more difference than any other change.
C.T. Hansen would be worth talking to about tyres.
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on February 11th, 2014 at 12:16 PM |
|
|
Ok, just replaced the back tyres with some cheapish 165s. Fronts will need some new ones soon though.
I was more thinking the comp as a way of ensuring safety.
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on February 11th, 2014 at 12:59 PM |
|
|
You want safety?......put the "cheapish" ones on the front, and get some "goodish" tyres on the back.
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
pete wood
A.k.a.: figure itout
23 Windows of Awesome
Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline
Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands
|
| posted on February 11th, 2014 at 03:59 PM |
|
|
Wow, really, I thought you wanted your best tyre on the front for steering and the worst tyre on the back for slidi... I mean... throttle control.
But seriously, what's your thinking behind this?
|
|
|
