Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Tech Mods and Frequently asked Questions Navigation Symbol Fitting ball joint front end to 65 pan Go To Bottom

Printable Version  
[ Total Views: 1035 | Total Replies: 3 | Thread Id: 105272 ]
« View Previous Thread View Next Thread »
Author: Subject:  Fitting ball joint front end to 65 pan
MemberYellowbug65
Casual Dubber
*

No Avatar


Posts: 49
Threads: 8
Registered: February 24th, 2014
Member Is Offline

Location: Brisbane North
Theme: UltimaBB Psyche Blue

posted on March 1st, 2014 at 07:01 PM
Fitting ball joint front end to 65 pan

New to vw's and I'm wondering if a ball joint front end will bolt straight to my 65 floor pan or do I need to use the older style link pin front end , all help on this would be appreciated
Thanks
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********

Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on March 1st, 2014 at 07:21 PM



If its the period correct floorpan for the car (original) then you need to use the older style Link pin front end.:tu:



https://www.youtube.com/watch?v=dqfSiuzSFh8 

https://www.youtube.com/watch?v=c9YaMBazbG0 
MemberYellowbug65
Casual Dubber
*

No Avatar


Posts: 49
Threads: 8
Registered: February 24th, 2014
Member Is Offline

Location: Brisbane North
Theme: UltimaBB Psyche Blue

posted on March 1st, 2014 at 07:33 PM



Ok thanks , any one have one to suit , lol
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********

Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on March 1st, 2014 at 09:52 PM



Try here

http://forums.aussieveedubbers.com/viewtopic.php?tid=104714&page=1#pid984785 



https://www.youtube.com/watch?v=dqfSiuzSFh8 

https://www.youtube.com/watch?v=c9YaMBazbG0 


 Aussieveedubbers Navigation Symbol Tech Mods and Frequently asked Questions Navigation Symbol Fitting ball joint front end to 65 pan   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 15.5% - SQL: 84.5% ]