Board Logo
Go To Bottom

Printable Version  
[ Total Views: 652 | Total Replies: 5 | Thread Id: 105273 ]
Author: Subject:  Wheel alignment
Membergordysbeetle
Seriously Crusin Dubber
**


No Avatar


Posts: 125
Threads: 19
Registered: June 20th, 2011
Member Is Offline

Location: Bathurst
Theme: UltimaBB Pro Blue ( Default )

posted on March 1st, 2014 at 07:13 PM
Wheel alignment


It's wheel alignment time for my 68 beetle (IRS). Due to the car being older than the alignment people I am thinking I will need to tell them what to set it at. So what toe in is everyone running ?
Thanks Gordon.
Memberpsimitar
Son of Jim - Creator of Good
******


Avatar


Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline

Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue

posted on March 1st, 2014 at 10:21 PM



from memory the front is half a degree toe in. Unsure about the rear but seen on Aircooled.net I think a good write up of more performance orientated settings. 2 degrees toe in sounds familiar for the IRS setup.



madness is in the eye of the beholder :yes:
MemberAA003
A.k.a.: Phill
Custom Title Time!
*****


Avatar


Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline

Location: Southern Highlands
Theme: UltimaBB Streamlined2

posted on March 2nd, 2014 at 10:15 AM



Take it to a steering specialist, not a tyre seller, as they should know what to do.

Good luck
(you'll need it.)




I read it on samba, so it must be correct.

Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!:lol:
Membercolin
Fahrvergnugen
****


Avatar


Posts: 984
Threads: 82
Registered: March 7th, 2007
Member Is Offline

Location: Tamworth
Theme: UltimaBB Pro Blue ( Default )

posted on March 2nd, 2014 at 01:42 PM



1mm total toe in at the front, 2mm total toe in at the rear.:tu:

Cheers Col
Membergordysbeetle
Seriously Crusin Dubber
**


No Avatar


Posts: 125
Threads: 19
Registered: June 20th, 2011
Member Is Offline

Location: Bathurst
Theme: UltimaBB Pro Blue ( Default )

posted on March 2nd, 2014 at 02:41 PM



Quote:
Originally posted by colin
1mm total toe in at the front, 2mm total toe in at the rear.:tu:

Cheers Col
thanks. gordon
Membergordysbeetle
Seriously Crusin Dubber
**


No Avatar


Posts: 125
Threads: 19
Registered: June 20th, 2011
Member Is Offline

Location: Bathurst
Theme: UltimaBB Pro Blue ( Default )

posted on March 2nd, 2014 at 02:43 PM



Quote:
Originally posted by psimitar
from memory the front is half a degree toe in. Unsure about the rear but seen on Aircooled.net I think a good write up of more performance orientated settings. 2 degrees toe in sounds familiar for the IRS setup.
:tu:


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 2.6% - SQL: 97.4% ]