| [ Total Views: 540 | Total Replies: 3 | Thread Id: 105728 ] |
|
|
 kuta
Casual Dubber
Posts: 44
Threads: 19
Registered: August 29th, 2010
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 9th, 2014 at 08:39 PM |
|
|
Leaky pushrod seals 36hp
After rebuilding my 36hp engine and re using the original pushrod tubes with new Elring seals I found oil leaking out of the seals.
What can I do to rectify this, maybe new pushrod tubes?
Do they make silicone seals? Where to get good quality seals?
I know everyone says all VW's leak oil but this should not be the case.
Any advice welcome.
Cheers Sean.
1957 Oval Window under slow restoration.
1959 Under slow preservation
|
|
|
silver
Veteran Volks Folk
Dangerous when poked
Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds
|
| posted on April 9th, 2014 at 09:07 PM |
|
|
I always replace the tubes but the old ones can be used if they are expanded/stretched back to spec length
Elring seals should be ok
not all VW's leak oil
Keeping it real !
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on April 9th, 2014 at 11:01 PM |
|
|
| Quote: | Originally
posted by silver
I always replace the tubes but the old ones can be used if they are expanded/stretched back to spec length
Elring seals should be ok
not all VW's leak oil
|
x2 on all accounts
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on April 10th, 2014 at 02:55 AM |
|
|
new 36hp tubes are hard to find
|
|
|
