Posts: 31
Threads: 17
Registered: December 15th, 2006
Member Is Offline
Theme: UltimaBB Pro Blue
posted on May 10th, 2014 at 06:33 PM
Switch removal?
Hi everyone, finished removing most of the wiring under the bonnet today, but can not work out how to remove the switches inside the car. Eg hazard
lights, wipers etc. they are the pull out push in ones 1970 beetle. Thanks
barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
posted on May 10th, 2014 at 07:18 PM
depending on the switch the knob screws off then there is a nut that requires it to be unscrewed using ether the proper tool or a pair of needle nose
pliers and then they just pop out.
the different ones are the fresh air box ones they just pull off.
Posts: 31
Threads: 17
Registered: December 15th, 2006
Member Is Offline
Theme: UltimaBB Pro Blue
posted on May 10th, 2014 at 07:21 PM
Thanks, mine where stuck up really really tight so where not screwing the top part off so that had me at a loss, but got that bit off will have a go
at other part with the needle nose tomorrow.