| [ Total Views: 1736 | Total Replies: 9 | Thread Id: 107032 ] |
|
|
 Betheeee
A.k.a.: Bethany
Casual Dubber
Posts: 25
Threads: 6
Registered: August 21st, 2014
Member Is Offline
Location: Perth
Theme: XMBX Pro Green
Mood: Happy
|
| posted on August 29th, 2014 at 11:39 PM |
|
|
My new little beetle, a pretty little 66
Just picked this up two weeks or so ago. Need to get it relicensed, so I fiddled with the lights that needed a little clean to work, my hubby has been
busy changing the brake drums and bearings ( interestingly enough, they were 65's ), we are replacing the washer tubing, and cleaning it up....
Hopefully, the bellows won't need replacing with an electric version. Then we need to check what sort of voltage is getting through to the tail
lights. Sooo dim, even for a 6v. Also have been chasing down non-black seat belts, (one was OK, but the passanger's side was a sash only) for the
front to start with, then I'll get to replacing the black rear ones down the track. The horn needs re wiring to the steering wheel.... Stuff like
that we can take our time with. Pretty neat car, all up, although she has been resprayed at some point.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Fräulein Helga - '66 1300 Beetle (Helga for short)
|
|
|
beetleboyjeff
A.k.a.: Jeff Walsh
Custom Title Time!
Posts: 1773
Threads: 40
Registered: February 13th, 2009
Member Is Offline
Location: Port Macquarie
Theme: UltimaBB Pro Blue ( Default )
Mood: Drive bugs hard
|
| posted on August 29th, 2014 at 11:51 PM |
|
|
With those dull tail lights, just check they are not 12v globes (unless the car has been upgraded from 6v to 12v).
From your ole' mate Jeff
|
|
|
oldskoolguy
Officially Full-On Dubber
Posts: 329
Threads: 13
Registered: September 6th, 2011
Member Is Offline
Location: Coffs Harbour NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Ticking over nicely.
|
| posted on August 30th, 2014 at 10:30 AM |
|
|
Very nice 
"The best trophies are stone chips"
1969 1500 Beetle "Otis"
2008 Golf GTI
|
|
|
Finky
Commited Dubber
Posts: 70
Threads: 5
Registered: August 10th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 31st, 2014 at 06:10 PM |
|
|
Love it!
|
|
|
Betheeee
A.k.a.: Bethany
Casual Dubber
Posts: 25
Threads: 6
Registered: August 21st, 2014
Member Is Offline
Location: Perth
Theme: XMBX Pro Green
Mood: Happy
|
| posted on September 6th, 2014 at 01:53 AM |
|
|
The bulbs were 6v, so we sanded all the connections, changed the brake switch...and voila... Brighter light..., yay! As for the washer, the bulb
wasn't bad, but wasn't airtight, so we changed all the tubing, cleaned the nozzle, and took a pump off a new universal electric kit. I got a 1-way
valve for in the bottle to keep the pump primed. My hubby adapted the old washer wiper switch to keep doing its thing. He took off the bellows, and
used what was left to be an earth breaker switch which connects when the nob is pulled as normal! Cool huh.
To the left is where it goes through the dash, and he is holding the nob. We powered the positive wire from the wipers to power the new motor, so it
forms the circuit.
I bought some new seat belts, we de-rusted the surface rust under the washer bottle, brake reservoir and spare tyre. Also, hubby painted with that
rubber paint for water proofing so it won't rust again, hopefully. Down the track, we will clean up the hood area, sort out the slightly messy
wiring, and paint the rubber paint to match the car
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Fräulein Helga - '66 1300 Beetle (Helga for short)
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on September 6th, 2014 at 04:08 PM |
|
|
great stuff!
|
|
|
Betheeee
A.k.a.: Bethany
Casual Dubber
Posts: 25
Threads: 6
Registered: August 21st, 2014
Member Is Offline
Location: Perth
Theme: XMBX Pro Green
Mood: Happy
|
| posted on September 7th, 2014 at 03:04 PM |
|
|
This is the wheel well with the black rubberised paint. We are leaving it black for now, until we want to clean up under the hood, etc.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Fräulein Helga - '66 1300 Beetle (Helga for short)
|
|
|
Betheeee
A.k.a.: Bethany
Casual Dubber
Posts: 25
Threads: 6
Registered: August 21st, 2014
Member Is Offline
Location: Perth
Theme: XMBX Pro Green
Mood: Happy
|
| posted on September 8th, 2014 at 06:47 PM |
|
|
Well, she is legal! Passed over the pits today, second time over. Yay!
Fräulein Helga - '66 1300 Beetle (Helga for short)
|
|
|
oldskoolie
Learner Dubber
Posts: 3
Threads: 0
Registered: June 29th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 13th, 2014 at 04:51 AM |
|
|
I did something nearly identical with my washer switch, I moulded (with heat) a recess in the washer bottle so the pump fits in there, It looks like
your hubby is a bit of a genius  |
|
|
Betheeee
A.k.a.: Bethany
Casual Dubber
Posts: 25
Threads: 6
Registered: August 21st, 2014
Member Is Offline
Location: Perth
Theme: XMBX Pro Green
Mood: Happy
|
| posted on October 13th, 2014 at 10:47 PM |
|
|
Thanks, he did a great job on converting the nob/switch! His first idea was to mount a switch to the shaft, but that didn't work. It took a bit of
discussion to get the next idea, and plenty of trial and error, and swearing from my hubby to get it working.... It was my idea about the one way
valve to keep the pump primed (go me). So far so good, all working great!
Fräulein Helga - '66 1300 Beetle (Helga for short)
|
|
|
