| [ Total Views: 1487 | Total Replies: 7 | Thread Id: 107039 ] |
|
|
 Boogsjr
Learner Dubber
Posts: 9
Threads: 5
Registered: August 16th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on August 30th, 2014 at 07:29 PM |
|
|
Diy Seat Upholstery or Pro Fitout
Hi Everyone,
Just looking for some advice regarding re-upholstering my 70 squareback front and back seats.
I was looking at stripping the seats back and importing all the parts(covers,padding etc) from Isp west and having a crack myself.
Alternatively i can take it to a local car upholsterer here in adelaide and get it done professionally. Anyone recommend a reliable place here in
adelaide.
Hoping someone has weighed up both options themselves and what they would recommend.
Cheers Nigel
|
|
|
GKW-405
Casual Dubber
Posts: 39
Threads: 10
Registered: June 26th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 5th, 2014 at 05:04 PM |
|
|
Have heard varying comments about the stuff from the US. Luckily for me my originals are in good condition, but my upholsterer said if I wanted to
replace them to get the ISP ones, bring them to him and he would custom fit them. Sometimes he said they need a seam here or there to be opened up and
re-stitched so that they sit right on the frame without having that pulled or stress ripple look.
Good luck... 
|
|
|
hpnotch
Seriously Crusin Dubber
Posts: 133
Threads: 28
Registered: November 11th, 2012
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 7th, 2014 at 09:25 PM |
|
|
My plan was to have a go at doing this job myself - using imported covers. In the end I took them to a trimmer. Glad I did - he fixed broken
springs, added some additional padding and generally had the seats looking brand new. Money well spent in the end!
|
|
|
Pfeffernuss
Slammed & Awesome Dubber
Posts: 80
Threads: 16
Registered: March 25th, 2012
Member Is Offline
Location: Canberra
Theme: UltimaBB Pro Charcoal
Mood: retrospective
|
| posted on October 27th, 2014 at 06:09 PM |
|
|
i did it myself with the ISP West (TMR) seat cover replacements.
bought some additional foam from clarke rubber to 'plump' the seats.
they came up awesome.
do it yourself my 2c
Besser als in die hohle Hand geschissen.
'71 Type 3 Fastback
'08 WRX
'14 Golf Variant HL
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on October 27th, 2014 at 06:55 PM |
|
|
TMI best products
just like original
|
|
|
silver
Veteran Volks Folk
Dangerous when poked
Posts: 2169
Threads: 162
Registered: December 8th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: In 2 Minds
|
| posted on October 27th, 2014 at 07:27 PM |
|
|
I did mine myself with TMI its good stuff
I also resprayed the seat frames while dismantled
Keeping it real !
|
|
|
68BUS
Wolfsburg Wizard
Posts: 485
Threads: 19
Registered: July 1st, 2011
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
Mood: Berwildered
|
| posted on October 28th, 2014 at 10:30 AM |
|
|
I did a combo of both.
Stripped all the seats down myself.
Got the blasted for $200 and primed (that was for bus front seats and middle seat).
Used satin black primer&topcoat acrylic from a can from frames and springs.
Bought springs and edge banding from DIY Upholstery Supplies and fitted them ($100 but only used about $60 worth).
Then got an upholster to custom make seat covers using coconut husk from the front hi use seats and foam for the back.
I used TMI material for my main colour but did it a bit different to most.
All up cost me about $3000 but the quality is second to none.
Busses have the issue of fitting covers too due to the large variety of seats from different years that are swapped about.
Type 3's might be a bit more simple.
It would be pretty time consuming to fit them but certainty doable. Real skill would be in the stitching them together or modifications. But if you
need to modify one you can fit the rest and then just pay hourly rate for the modification somewhere.
1966 Aussie 11 Window
|
|
|
Boogsjr
Learner Dubber
Posts: 9
Threads: 5
Registered: August 16th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue
|
| posted on November 2nd, 2014 at 05:44 PM |
|
|
Thanks everyone for the advice and personal experiences.
I think after hearing from everyone who have had a go at doing it themselves i will do the same.
Ill strip it back, spray the seat frame and springs.
Ill redo the cushions with some high density foam from clark rubber coz the springs have destroyed the original cushioning.
The TMI seats covers look great too.
|
|
|
