Subject: 20mm lowered rear T3 springs / possibly T4 ?????
Special Air Service
Custom Title Time!
Chief "Gunna"
Posts: 1769
Threads: 210
Registered: October 4th, 2004
Member Is Offline
Location: Old Bar , Mid North Coast , NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: In desperate need of a decent sleep
posted on September 8th, 2014 at 06:53 PM
20mm lowered rear T3 springs / possibly T4 ?????
I have a pair of coil springs that I acquired for my van in the hope that they would lower the rear a little more than my current springs. Didn't
work out for me though.
As far as I can make out they will lower the rear of a T3 caravelle approx. 20mm.
They do fit on a T3, as I have test fitted them on mine.
Now I have a funny feeling that they may actually be off the rear of a T4, possibly someone else may be able to help out here.
The inside diameter of the smallest wind / coil at the top & bottom of the spring is approx. 45mm which fits over the spring locators on a T3
The uncompressed overall length is approx. 250mm camera angle makes it look a little longer.
Looking for $20 as that's about what they cost by the time I had them in my hands.
Located at Old Bar NSW, so pick up at old bar festival is possible or I could ship if necessary.
