| [ Total Views: 707 | Total Replies: 10 | Thread Id: 108082 ] |
|
|
 Outaluck
Learner Dubber
Posts: 12
Threads: 2
Registered: December 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 6th, 2015 at 07:50 PM |
|
|
How to unlower a superbug front end
Hi All,
I have a 72 Super that have been significantly lowered (at least 2") and need help to work out how it was lowered so I can return to standard height.
Could someone list the ways that a strut can be lowered and how can I check/measure to confirm.
I'm hoping it's just a mater of replacing the springs?
Thanks
|
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on January 6th, 2015 at 09:05 PM |
|
|
This is a link to lowering a Super. It will give you some information to work out stock height. I would say easiest way to raise would be to buy some
stock struts, and sell your lowered struts.
Maybe a swap can be organised
LINK
http://forums.aussieveedubbers.com/viewtopic.php?tid=48798&page=1
|
|
|
Outaluck
Learner Dubber
Posts: 12
Threads: 2
Registered: December 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 6th, 2015 at 09:25 PM |
|
|
Thanks Helbus,
I could not see where the struts had been cut & welded on mine but looking at the pics my strut length below the spring base looks about 1/2 what
the standard strut height is. And if thats a 60mm lower mine must be a good 100mm lower because the tyres are well up inside the guards. A swap would
be hard as its a daily driver. Where would be the best place to by new struts?
Cheers
PS anone looking for some seriously lowered struts.
|
|
|
barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on January 6th, 2015 at 09:34 PM |
|
|
where are you?
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on January 6th, 2015 at 09:44 PM |
|
|
THey are probably adjustable struts just on the lowest setting.
Stock struts run out of travel before they get that low.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on January 7th, 2015 at 07:16 AM |
|
|
I have a s/h pair of 3 bolt struts complete with springs in Taree if interested please PM.These will probably need new inserts.
|
|
|
Outaluck
Learner Dubber
Posts: 12
Threads: 2
Registered: December 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2015 at 04:23 PM |
|
|
| Quote: | Originally
posted by barls
where are you?
|
I am in Mackay Qld
|
|
|
Outaluck
Learner Dubber
Posts: 12
Threads: 2
Registered: December 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2015 at 04:30 PM |
|
|
| Quote: | Originally
posted by Joel
THey are probably adjustable struts just on the lowest setting.
Stock struts run out of travel before they get that low.
|
Hey Joel, Pulled the wheel off and had a good look yesterday and they do indeed seen like they are adjustable struts. There are ring grooves in the
strut and a bit of surfn on the web they look like EMPI type. The topline ones have move grooves.
I'm hoping it just a simple case of adjusting them back up. Anyone know what the lowered amount will be on the top adjustment if I adjust them up to
the highest setting?
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on January 11th, 2015 at 05:38 PM |
|
|
I've found with those that the stock springs on the highest setting is about 1.5- 2" lower than stock but it varies from car to car depending how
tired the springs are.
|
|
|
Outaluck
Learner Dubber
Posts: 12
Threads: 2
Registered: December 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2015 at 05:44 PM |
|
|
| Quote: | Originally
posted by Joel
I've found with those that the stock springs on the highest setting is about 1.5- 2" lower than stock but it varies from car to car depending how
tired the springs are.
|
2" max lower would probably be OK, I think the superbugs look best when they are level and not have the nose up in the air. What were they 1"- 2"
higher in the front as standard?
So do you think I should be able to just put a set of spring compressors on and do the adjustment with the strut still in the car
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on January 11th, 2015 at 05:48 PM |
|
|
You can try but compressing them enough to get it up on the highest groove can be tricky when in the car.
The nose up stance gave them better self centering but also made them wander at speed but most have sagged in the arse over the years which lifts the
front up.
|
|
|
